Related references
Note: Only part of the references are listed.Enhanced Interfacial Adhesion by Reactive Carbon Nanotubes: New Route to High-Performance Immiscible Polymer Blend Nanocomposites with Simultaneously Enhanced Toughness, Tensile Strength, and Electrical Conductivity
Xuewen Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Polyamide 6 modified polypropylene with remarkably enhanced mechanical performance, thermal properties, and foaming ability via pressure-induced-flow processing approach
Dajiong Fu et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Quantifying microstructural, thermal, mechanical and solid-state viscoelastic properties of polyolefin blend type thermoplastic elastomer compounds
Mine Begum Alanalp et al.
POLYMER (2018)
An investigation on the reinforcement mechanism of the nano-sized carbonaceous filled epoxy-glass fiber hybrid-composites through analysis of fracture surfaces
Ehsan Soltani et al.
POLYMER COMPOSITES (2018)
Statistical design of sustainable thermoplastic blends of poly(glycerol succinate-co-maleate) (PGSMA), poly(lactic acid) (PLA) and poly(butylene succinate) (PBS)
Oscar Valerio et al.
POLYMER TESTING (2018)
Solid-state mechanical properties of PE/PA blends filled with organoclay or compatibilized by a graft co-polymer: A comparative study
J. Huitric et al.
POLYMER TESTING (2018)
Processing of ultra-high molecular weight polyethylene/graphite composites by ultrasonic injection moulding: Taguchi optimization
Xavier Sanchez-Sanchez et al.
ULTRASONICS SONOCHEMISTRY (2018)
Assessment of localization and degradation of ZnO nano-particles in the PLA/PCL biocompatible blend through a comprehensive rheological characterization
Yeganeh Ahmadzadeh et al.
POLYMER DEGRADATION AND STABILITY (2018)
Optimisation of hybridisation effect in graphene reinforced polymer nanocomposites
Velram Balaji Mohan et al.
ADVANCED COMPOSITE MATERIALS (2018)
Investigation on the morphological and mechanical properties of (polyamide 6)/(poly[styrene-co-acrylonitrile])/(poly[styrene-b-{ethylene-co-butylene}-b-styrene]) ternary blends
Amir Babaei et al.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2017)
Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS
Yijian Wu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Morphology Evolution of Polymer Blends under Intense Shear During High Speed Thin-Wall Injection Molding
Yi Zhou et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2017)
Elasticity or viscosity, which one is more influential on the internal structure of a core-shell morphology in ternary blends?
Masoud Khoshnood et al.
JOURNAL OF POLYMER RESEARCH (2017)
Morphology, microstructure and rheological properties of SAN (styrene-acrylonitrile)/EPDM (ethylene-propylene-diene monomer) nanocomposites: Investigating the role of organoclay type and order of mixing
Javad Jeddi et al.
MATERIALS CHEMISTRY AND PHYSICS (2017)
Morphology development and superior mechanical properties of PP/PA6/SEBS ternary blends compatibilized by using a highly efficient multi-phase compatibilizer
Huanmin Li et al.
POLYMER (2017)
Solid-state morphology, structure, and tensile properties of polyethylene/polyamide/nanoclay blends: Effect of clay fraction
Jacques Huitric et al.
POLYMER TESTING (2017)
Optimizing Physio-Mechanical Properties of Halloysite Reinforced Polyurethane Nanocomposites by Taguchi Approach
Tayser Sumer Gaaz et al.
SCIENCE OF ADVANCED MATERIALS (2017)
The roles of nanoparticles accumulation and interphase properties in properties of polymer particulate nanocomposites by a multi-step methodology
Yasser Zare
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Tailoring the properties of PP/PA6 nanostructured blends by the addition of nanosilica and compatibilizer agents
Jordana K. Palacios et al.
EUROPEAN POLYMER JOURNAL (2016)
Effects of nanoparticles on the morphology of immiscible polymer blends - Challenges and opportunities
Martina Salzano de Luna et al.
EUROPEAN POLYMER JOURNAL (2016)
Tribological investigations of carbon nanotube-reinforced polymer (UHMWPE) nanocomposites using Taguchi methodology
Dahiru Lawal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Optimization of mechanical properties of polypropylene/talc/graphene composites using response surface methodology
Faramarz Ashenai Ghasemi et al.
POLYMER TESTING (2016)
Optimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis
Hifsa Pervez et al.
MATERIALS (2016)
Structural, rheological, and mechanical properties of PA6/SAN/SEBS ternary blend/organoclay nanocomposites
Amir Babaei et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Phase Structure of Polyamide 6/Poly(styrene-co-acrylonitrile) and Poly(styrene-b-(ethylene-co-butylene)-b-styrene) or Poly(maleated Styrene/Ethylene-co-Butylene/Styrene) Ternary Blends
Amir Babaei et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2014)
Improving impact toughness of polylactide/poly(ether)urethane blends via designing the phase morphology assisted by hydrophilic silica nanoparticles
Hao Xiu et al.
POLYMER (2014)
Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method
Nik Mizamzul Mehat et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Shape-Dependent Localization of Carbon Nanotubes and Carbon Black in an Immiscible Polymer Blend during Melt Mixing
Andreas Goeldel et al.
MACROMOLECULES (2011)
Stabilization and control of phase morphology of PA/SAN blends via incorporation of exfoliated clay
Ehsan Moghbelli et al.
POLYMER (2010)
Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene-acrylonitrile)
Andreas Goeldel et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2009)
Crystallization controlled by layered silicates in nylon 6-clay nano-composite
Yoshihiro Katoh et al.
POLYMER (2009)
Compatibilizing effect of SEBS-g-MA on the mechanical properties of different types of OMMT filled polyamide 6/polypropylene nanocomposites
Kusmono et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Effects of clay type, clay/compatibiliser content and matrix viscosity on the mechanical properties of polypropylene/organoclay nanocomposites
Yu Dong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Influence of SEBS-g-MA on morphology, mechanical, and thermal properties of PA6/PP/organoclay nanocomposites
Kusmono et al.
EUROPEAN POLYMER JOURNAL (2008)
Structural analysis of multicomponent nanoclay-containing polymer blends through simple model systems
Ladan As'habi et al.
POLYMER (2008)
Immiscible polymer blends stabilized with nano-silica particles:: Rheology and effective interfacial tension
L. Elias et al.
POLYMER (2008)
Rheology, morphology, and crystallization Behavior of melt-mixed blends of polyamide6 and acrylonitrile-butadiene-styrene:: Influence of reactive compatibilizer premixed with multiwall carbon nanotubes
Suryasarathi Bose et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Effect of multi-walled carbon nanotubes on non-isothermal crystallization kinetics of polyamide 6
Juan Li et al.
EUROPEAN POLYMER JOURNAL (2006)
Crystallization and melting behavior of multi-walled carbon nanotube-reinforced nylon-6 composites
IY Phang et al.
POLYMER INTERNATIONAL (2006)
Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites
YJ Li et al.
POLYMER (2004)
Structure and mechanical properties of poly(D,L-lactic acid)/poly(ε-caprolactone) blends
ME Broz et al.
BIOMATERIALS (2003)
High performance LDPE/thermoplastic starch blends: a sustainable alternative to pure polyethylene
FJ Rodriguez-Gonzalez et al.
POLYMER (2003)
Reactive compatibilization of nylon 6/styrene-acrylonitrile copolymer blends Part 3. Tensile stress-strain behavior
N Kitayama et al.
POLYMER (2001)