Related references
Note: Only part of the references are listed.FTIR Spectral Characterization, Mechanical Properties and Antimicrobial Properties of La-Doped Phosphate-Based Bioactive Glasses
Rasha A. Youness et al.
SILICON (2018)
Effect of Nano-ZrO2 on the Properties of Al-Al2O3 Nanocomposites Prepared by Mechanical Alloying
M. F. Zawrah et al.
SILICON (2018)
Mechanical Alloying and Sintering of a Ni/10wt.%Al2O3 Nanocomposite and its Characterization
Mohammed A. Taha et al.
SILICON (2018)
Mechanical properties, in vitro and in vivo bioactivity assessment of Na2O-CaO-P2O5-B2O3-SiO2 glass-ceramics
E. M. A. Khalil et al.
CERAMICS INTERNATIONAL (2018)
In-situ formation of Al2O3/Al core-shell from waste material: Production of porous composite improved by graphene
M. F. Zawrah et al.
CERAMICS INTERNATIONAL (2018)
Effect of processing techniques on properties of porous TiO2 and TiO2/hydroxyapatite composites
R. M. Khattab et al.
CERAMICS INTERNATIONAL (2018)
Impact modified PLA-hydroxyapatite composites - Thermo-mechanical properties
John O. Akindoyo et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Predicting powder densification during sintering
S. Y. Gomez et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Effect of ZrO2 contents and ageing times on mechanical and electrical properties of Al-4.5 wt.% Cu nanocomposites prepared by mechanical alloying
Mohammed A. Taha et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Hydroxyapatite-chitosan based bioactive hybrid biomaterials with improved mechanical strength
A. Zima
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2018)
Influence of the addition of carbonated hydroxyapatite and selenium dioxide on mechanical properties and in vitro bioactivity of borosilicate inert glass
Rasha A. Youness et al.
CERAMICS INTERNATIONAL (2018)
In vitro bioactivity, physical and mechanical properties of carbonated-fluoroapatite during mechanochemical synthesis
Rasha A. Youness et al.
CERAMICS INTERNATIONAL (2018)
Bioactive inorganic/organic nanocomposites for wound healing
Xiaocheng Wang et al.
APPLIED MATERIALS TODAY (2018)
Preparation, Fourier Transform Infrared Characterization and Mechanical Properties of Hydroxyapatite Nanopowders
Rasha A Youness et al.
Journal of Computational and Theoretical Nanoscience (2017)
Effect of sintering temperatures on the in vitro bioactivity, molecular structure and mechanical properties of titanium/carbonated hydroxyapatite nanobiocomposites
Rasha A. Youness et al.
JOURNAL OF MOLECULAR STRUCTURE (2017)
Effect of zinc oxide on the electronic properties of carbonated hydroxyapatite
Ahmed Refaat et al.
JOURNAL OF MOLECULAR STRUCTURE (2017)
Molecular modeling, FTIR spectral characterization and mechanical properties of carbonated-hydroxyapatite prepared by mechanochemical synthesis
Rasha A. Youness et al.
MATERIALS CHEMISTRY AND PHYSICS (2017)
Biodegradable ceramic-polymer composites for biomedical applications: A review
Michal Dziadek et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Biodegradable Materials and Metallic Implants-A Review
Mythili Prakasam et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2017)
Sintering and properties of borosilicate glass/Li-Na-K-feldspar composites for electronic applications
M. F. Zawrah et al.
CERAMICS INTERNATIONAL (2017)
Effect of nano ZrO2 on strengthening and electrical properties of Cu-matrix nanocomposits prepared by mechanical alloying
Mohammed A. Taha et al.
CERAMICS INTERNATIONAL (2017)
Mechanical characteristics of biodegradable magnesium matrix composites: A review
Meysam Haghshenas
JOURNAL OF MAGNESIUM AND ALLOYS (2017)
Fabrication of polylactic acid/hydroxyapatite/graphene oxide composite and their thermal stability, hydrophobic and mechanical properties
Ming Gong et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)
Impact of carbon nanotube defects on fracture mechanisms in ceramic nanocomposites
Yingchao Yang et al.
CARBON (2017)
Improvement of wetability, sinterability, mechanical and electrical properties of Al2O3-Ni nanocomposites prepared by mechanical alloying
Mohammed A. Taha et al.
CERAMICS INTERNATIONAL (2017)
Study of pore closure during pressure-less sintering of advanced oxide ceramics
Tomas Spusta et al.
ACTA MATERIALIA (2016)
A review of two-step sintering for ceramics
N. J. Loh et al.
CERAMICS INTERNATIONAL (2016)
Mechanical properties and biocompatibility of the sputtered Ti doped hydroxyapatite
A. Vladescu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Effect of milling parameters on sinterability, mechanical and electrical properties of Cu-4 wt.% ZrO2 nanocomposite
Mohammed A. Taha et al.
MATERIALS CHEMISTRY AND PHYSICS (2016)
Mechanical properties of natural chitosan/hydroxyapatite/magnetite nanocomposites for tissue engineering applications
Fatemeh Heidari et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Next-generation polymer nanocomposite-based electrochemical sensors and biosensors: A review
Swati Shrivastava et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2016)
Polymer-matrix nanocomposite membranes for water treatment
Jun Yin et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
An Overview on the Improvement of Mechanical Properties of Ceramics Nanocomposites
J. Silvestre et al.
JOURNAL OF NANOMATERIALS (2015)
In vitro bioactivity evaluation, mechanical properties and microstructural characterization of Na2O-CaO-B2O3-P2O5 glasses
Sherief M. Abo-Naf et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2015)
Structural Ceramic Nanocomposites: A Review of Properties and Powders' Synthesis Methods
Paola Palmero
NANOMATERIALS (2015)
Fabrication, Properties and Applications of Dense Hydroxyapatite: A Review
Mythili Prakasam et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2015)
Microstructure and mechanical properties of ZrO2 ceramics toughened by 5-20 vol% Ta metallic particles fabricated by pressureless sintering
A. Smirnov et al.
CERAMICS INTERNATIONAL (2014)
Mechanical alloying, sintering and characterization of Al2O3-20 wt%-Cu nanocomposite
Mahmoud F. Zawrah et al.
CERAMICS INTERNATIONAL (2014)
Nano-Hydroxyapatite Composite Biomaterials for Bone Tissue Engineering-A Review
Jayachandran Venkatesan et al.
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2014)
Enhancement of the mechanical properties of hydroxyapatite by SIC addition
A. Vladescu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Biocompatible nanocrystalline natural bonelike carbonated hydroxyapatite synthesized by mechanical alloying in a record minimum time
S. Lala et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Biodegradable metals
Y. F. Zheng et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Effect of surfactant types and their concentration on the structural characteristics of nanoclay
M. F. Zawrah et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2014)
Preparation by mechanical alloying, characterization and sintering of Cu-20 wt.% Al2O3 nanocomposites
M. F. Zawrah et al.
MATERIALS & DESIGN (2013)
Sintering and technological properties of alumina/zirconia/nano-TiO2 ceramic composites
M. M. S. Wahsh et al.
MATERIALS RESEARCH BULLETIN (2013)
Mechanically alloyed nanocomposites
C. Suryanarayana et al.
PROGRESS IN MATERIALS SCIENCE (2013)
Synthesis and characterization of nanostructured CaSiO3 biomaterial
Pramod N. Jagadale et al.
MATERIALS SCIENCE-POLAND (2013)
Effect of SiC-graphite-Al-metal addition on low- and ultra-low cement bauxite castables
M. F. Zawrah et al.
CERAMICS INTERNATIONAL (2012)
Tailoring the Relative Si3N4 and SiC Contents in Si3N4/SiC Nanopowders through Carbothermic Reduction and Nitridation of Silica Fume
Jyothi Suri et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2012)
Synthesis and characterization of SiC and SiC/Si3N4 composite nano powders from waste material
M. F. Zawrah et al.
JOURNAL OF HAZARDOUS MATERIALS (2012)
Fabrication of Al2O3-20 vol.% Al nanocomposite powders using high energy milling and their sinterability
M. F. Zawrah et al.
MATERIALS RESEARCH BULLETIN (2012)
In situ formation of sintered cordierite-mullite nano-micro composites by utilizing of waste silica fume
R. M. Khattab et al.
MATERIALS RESEARCH BULLETIN (2012)
Synthesis of carbon-free Si3N4/SiC nanopowders using silica fume
Jyothi Suri et al.
CERAMICS INTERNATIONAL (2011)
Microstructure and properties of alumina-silicon carbide nanocomposites fabricated by pressureless sintering and post hot-isostatic pressing
Young-Keun Jeong et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Effects of crystalline phase on the biological properties of collagen-hydroxyapatite composites
L. Zhang et al.
ACTA BIOMATERIALIA (2010)
Self-assembled collagen/hydroxyapatite composite materials
Anton Ficai et al.
CHEMICAL ENGINEERING JOURNAL (2010)
Fabrication and properties of titanium-hydroxyapatite nanocomposites
K. Niespodziana et al.
MATERIALS CHEMISTRY AND PHYSICS (2010)
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
I. Armentano et al.
POLYMER DEGRADATION AND STABILITY (2010)
Advanced spinel and sub-mu m Al2O3 for transparent armour applications
Andreas Krell et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
In situ formation of zirconia-alumina-spinel-mullite ceramic composites
M. Awaad et al.
CERAMICS INTERNATIONAL (2008)
Nanostructured poly(vinyl alcohol)/bioactive glass and poly (vinyl alcohol)/chitosan/bioactive glass hybrid scaffolds for biomedical applications
Herman S. Mansur et al.
CHEMICAL ENGINEERING JOURNAL (2008)
Hydroxyapatite-reinforced polymer biocomposites for synthetic bone substitutes
Ryan K. Roeder et al.
JOM (2008)
Toward pore-free ceramics
Gary L. Messing et al.
SCIENCE (2008)
Biodegradable polymers as biomaterials
Lakshmi S. Nair et al.
PROGRESS IN POLYMER SCIENCE (2007)
Comparative study of the effect of different nanoparticles on the mechanical properties and thermal degradation mechanism of in situ prepared poly(E-caprolactone) nanocomposites
K. Chrissafis et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Nanobiomaterial applications in orthopedics
Elizabeth M. Christenson et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2007)
Synthesis and characterization of WC-Co nanocomposites by novel chemical method
M. F. Zawrah
CERAMICS INTERNATIONAL (2007)
Porosity dependence of mechanical properties of solid materials
SC Ji et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
K Rezwan et al.
BIOMATERIALS (2006)
In situ formation of Al2O3-SiC-mullite from Al-matrix composites
MF Zawrah et al.
CERAMICS INTERNATIONAL (2006)
Zirconia/nickel interfaces in micro- and nanocomposites
C Pecharromán et al.
ZEITSCHRIFT FUR METALLKUNDE (2005)
Nanocomposites in context
ET Thostenson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Densification and properties of glass/cordierite composites
EM Hamawy et al.
CERAMICS INTERNATIONAL (2005)
Characterisation of borosilicate glass matrix composites reinforced with SiC or ZrO2
MFM Zawrah et al.
BRITISH CERAMIC TRANSACTIONS (2004)
Sol-gel derived bioglass as a coating material for porous alumina scaffolds
JL Liu et al.
CERAMICS INTERNATIONAL (2004)
Numerical simulation of solid state sintering; model and application
T Kraft et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Microstructure and hardness of nanostructured Al-Fe-Cr-Ti alloys through mechanical alloying
M Zawrah et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effect of Cr2O3 on sinterability and properties of mullite-spinel composites
MFM Zawrah
BRITISH CERAMIC TRANSACTIONS (2003)
Modelling sintering at different length scales
JZ Pan
INTERNATIONAL MATERIALS REVIEWS (2003)
Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders
JB Fogagnolo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effects of process-control agents on mechanical alloying of nanostructured aluminum alloys
L Shaw et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
Fracture toughness of PAN-based carbon fibers estimated from strength-mirror size relation
K Honjo
CARBON (2003)
Sinterability, microstructure and properties of glass/ceramic composites
AA El-Kheshen et al.
CERAMICS INTERNATIONAL (2003)
Zirconia/stainless-steel continuous functionally graded material
S López-Esteban et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)
The effect of size-dependent nanoparticle energetics on catalyst sintering
CT Campbell et al.
SCIENCE (2002)
Hydroxyapatite and hydroxyapatite-based ceramics
VP Orlovskii et al.
INORGANIC MATERIALS (2002)
Mechanically stable monoclinic zirconia-nickel composite
JS Moya et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)
Novel current-conducting composite substrates for exposing osteoblasts to alternating current stimulation
PR Supronowicz et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Effect of cristobalite formation on sinterability, microstructure and properties of glass/ceramic composites
MF Zawrah et al.
CERAMICS INTERNATIONAL (2002)
Phase transformation, microstructure and mechanical properties of Si3N4/SiC composite
JF Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)
Porous ceramic granules of hydroxyapatite
VS Komlev et al.
REFRACTORIES AND INDUSTRIAL CERAMICS (2001)
Bending strength and microstructure of Al2O3 ceramics densified by spark plasma sintering
L Gao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)
Grain-growth rate constant of hot-pressed alumina ceramics
ZM He et al.
MATERIALS LETTERS (2000)
Characterization of singlewalled carbon nanotubes-PMMA composites
C Stéphan et al.
SYNTHETIC METALS (2000)
Share Paper
