4.7 Article

Bio-oil recovery from olive mill wastewater in sub-/supercritical alcohol-water system

Journal

FUEL
Volume 252, Issue -, Pages 360-370

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.fuel.2019.04.133

Keywords

Olive mill wastewater; Liquefaction; Alcohol-water co-solvent; Bio-oil

Ask authors/readers for more resources

Olive mill wastewater was converted into bio-oil via thermochemical liquefaction with alcohol/water mixtures in an autoclave (998 ml). The influence of operating conditions on the yield of liquefaction products was investigated. Liquefaction experiments were performed at various reaction temperatures in the range of 240-320 degrees C. Experimental results indicated that alcohol (methanol or ethanol)/water mixtures had synergistic effects on olive mill wastewater direct liquefaction. The ratio 50% (w/w) co-solvent of either ethanol-water or methanol-water and a reaction temperature of 280 degrees C were found to be the most effective. Under these conditions and for a reaction time of 30 min, the bio-oil yield was 92.31 wt% for ethanol-water and 77.97 wt% for methanol-water. The bio-oil produced with methanol-water mixture has higher energy content (43.20 MJ/kg) compared to the one obtained with ethanol-water mixture (39.21 MJ/kg). In addition, Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry analyses showed high esters concentrations and low free fatty acid content in the obtained bio-oils.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available