Related references
Note: Only part of the references are listed.Structure and properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/poly(L-lactic acid) quasi core/sheath melt-electrospun microfibers
Huaizhong Xu et al.
TEXTILE RESEARCH JOURNAL (2019)
Simultaneous Micropatterning of Fibrous Meshes and Bioinks for the Fabrication of Living Tissue Constructs
Mylene de Ruijter et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Tissue engineered human prostate microtissues reveal key role of mast cell-derived tryptase in potentiating cancer-associated fibroblast (CAF)-induced morphometric transition in vitro
Brooke A. Pereira et al.
BIOMATERIALS (2019)
A Growth Factor-Free Co-Culture System of Osteoblasts and Peripheral Blood Mononuclear Cells for the Evaluation of the Osteogenesis Potential of Melt-Electrowritten Polycaprolactone Scaffolds
Andreas Hammerl et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
Black plaster composite fiber prepared by upward electrospinning
Yulong Xu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Fabrication of arbitrary three-dimensional suspended hollow microstructures in transparent fused silica glass
Frederik Kotz et al.
NATURE COMMUNICATIONS (2019)
Prefabricated and Self-Setting Cement Laminates
Theresa Brueckner et al.
MATERIALS (2019)
Tailored Melt Electrowritten Scaffolds for the Generation of Sheet-Like Tissue Constructs from Multicellular Spheroids
Rebecca McMaster et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Permanent Hydrophilization and Generic Bioactivation of Melt Electrowritten Scaffolds
Sarah Bertlein et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration - a pilot study in vitro
A. Fuchs et al.
BMC ORAL HEALTH (2019)
Fabrication of Ultrafine PPS Fibers with High Strength and Tenacity via Melt Electrospinning
Zuo-Ze Fan et al.
POLYMERS (2019)
Machine learning metrology of cell confinement in melt electrowritten three-dimensional biomaterial substrates
Filippos Tourlomousis et al.
MICROSYSTEMS & NANOENGINEERING (2019)
Fabrication of Designable and Suspended Microfibers via Low-Voltage 3D Micropatterning
Elisabeth L. Gill et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
The Preparation of Cyclic Butylene Terephthalate Fibers with Novel Morphology Based on Melt Electrospinning
Bing Zhou et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2019)
Rheological Characterization of Biomaterials Directs Additive Manufacturing of Strontium-Substituted Bioactive Glass/Polycaprolactone Microfibers
Naomi C. Paxton et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2019)
Identification of sagging in melt-electrospinning of microfiber scaffolds
Nhat Tung Nguyen et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Melt-electrospinning of poly(ether ether ketone) fibers to avoid sulfonation
Nelaka Dilshan Govinna et al.
POLYMER (2019)
Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment
Michal Bartnikowski et al.
PROGRESS IN POLYMER SCIENCE (2019)
BIOMEDICINE Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Bagrat Grigoryan et al.
SCIENCE (2019)
Biologically Inspired Scaffolds for Heart Valve Tissue Engineering via Melt Electrowriting
Navid T. Saidy et al.
SMALL (2019)
The Impact of Melt Electrowritten Scaffold Design on Porosity Determined by X-Ray Microtomography
Almoatazbellah Youssef et al.
TISSUE ENGINEERING PART C-METHODS (2019)
Effects of Gradient and Offset Architectures on the Mechanical and Biological Properties of 3-D Melt Electrowritten (MEW) Scaffolds
Naghmeh Abbasi et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
A Fundamental Study of Charge Effects on Melt Electrowritten Polymer Fibers
Houzhu Ding et al.
MATERIALS & DESIGN (2019)
Engineered bone for probing organotypic growth and therapy response of prostate cancer tumoroids in vitro
Claudia Paindelli et al.
BIOMATERIALS (2019)
A 3D tumor microenvironment regulates cell proliferation, peritoneal growth and expression patterns
Daniela Loessner et al.
BIOMATERIALS (2019)
A composite microfibre-supported short-nanofibre photocatalyst for environmental pollutant decomposition
Ruta Sidaraviciute et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2019)
Wire Melt Electrospinning of Thin Polymeric Fibers via Strong Electrostatic Field Gradients
Kai Morikawa et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
Melt electrowriting of electroactive poly(vinylidene difluoride) fibers
Sammy Florczak et al.
POLYMER INTERNATIONAL (2019)
Controlled release of antibiotics from poly-ε-caprolactone/polyethylene glycol wound dressing fabricated by direct-writing melt electrospinning
Feng-Li He et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
Printomics: the high-throughput analysis of printing parameters applied to melt electrowriting
Felix M. Wunner et al.
BIOFABRICATION (2019)
3D Electrophysiological Measurements on Cells Embedded within Fiber-Reinforced Matrigel
Natascha Schaefer et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Near-field melt electrospinning of poly(ε-caprolactone) (PCL) micro-line array for cell alignment study
Feng Liang et al.
MATERIALS RESEARCH EXPRESS (2019)
Design and Development of a Three-Dimensional Printing High-Throughput Melt Electrowriting Technology Platform
Felix M. Wunner et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2019)
Engineering osteoblastic metastases to delineate the adaptive response of androgen-deprived prostate cancer in the bone metastatic microenvironment
Nathalie Bock et al.
BONE RESEARCH (2019)
A new prototype melt-electrospinning device for the production of biobased thermoplastic sub-microfibers and nanofibers
Kylie Koenig et al.
BIOMATERIALS RESEARCH (2019)
Tuning the gas separation performance of fluorinated and sulfonated PEEK membranes by incorporation of zeolite 4A
Zaman Tahir et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
The effects of processing parameters on the morphology of PLA/PEG melt electrospun fibers
Tayebe Nazari et al.
POLYMER INTERNATIONAL (2018)
Development of Endothelial Cell Networks in 3D Tissues by Combination of Melt Electrospinning Writing with Cell-Accumulation Technology
Sarah Bertlein et al.
SMALL (2018)
Out-of-Plane 3D-Printed Microfibers Improve the Shear Properties of Hydrogel Composites
Mylene de Ruijter et al.
SMALL (2018)
PLLA-PHB fiber membranes obtained by solvent-free electrospinning for short-time drug delivery
K. Cao et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2018)
Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour Check for oPdetes mimicking that of ligaments and tendons
Gernot Hochleitner et al.
ACTA BIOMATERIALIA (2018)
Mediating human stem cell behaviour via defined fibrous architectures by melt electrospinning writing
Kian F. Eichholz et al.
ACTA BIOMATERIALIA (2018)
3D Jet Writing: Functional Microtissues Based on Tessellated Scaffold Architectures
Jacob H. Jordahl et al.
ADVANCED MATERIALS (2018)
Melt Electrospinning Writing of Highly Ordered Large Volume Scaffold Architectures
Felix M. Wunner et al.
ADVANCED MATERIALS (2018)
Assessment of static and perfusion methods for decellularization of PCL membrane-supported periodontal ligament cell sheet constructs
Amro Farag et al.
ARCHIVES OF ORAL BIOLOGY (2018)
Humanization of bone and bone marrow in an orthotopic site reveals new potential therapeutic targets in osteosarcoma
Ferdinand Wagner et al.
BIOMATERIALS (2018)
Rational design and fabrication of multiphasic soft network composites for tissue engineering articular cartilage: A numerical model-based approach
Onur Bas et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Animal models for bone tissue engineering and modelling disease
Jacqui Anne McGovern et al.
DISEASE MODELS & MECHANISMS (2018)
Melt-electrospinning as a method to improve the dissolution and physical stability of a poorly water-soluble drug
Kristian Semjonov et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Novel polycaprolactone/hydroxyapatite nanocomposite fibrous scaffolds by direct melt-electrospinning writing
Abdalla Abdal-hay et al.
EUROPEAN POLYMER JOURNAL (2018)
Immune system augmentation via humanization using stem/progenitor cells and bioengineering in a breast cancer model study
Abbas Shafiee et al.
INTERNATIONAL JOURNAL OF CANCER (2018)
Efficient preparation of poly(lactic acid) nanofibers by melt differential electrospinning with addition of acetyl tributyl citrate
Yongxin Qin et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2018)
The effect of decellularized tissue engineered constructs on periodontal regeneration
Amro Farag et al.
JOURNAL OF CLINICAL PERIODONTOLOGY (2018)
Melt Electrowriting of Thermoplastic Elastomers
Gernot Hochleitner et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2018)
Electrospinning writing with molten poly (ε-caprolactone) from different directions - Examining the effects of gravity
Felix M. Wunner et al.
MATERIALS LETTERS (2018)
Additively manufactured biphasic construct loaded with BMP-2 for vertical bone regeneration: A pilot study in rabbit
Sudheesh P. T. Kumar et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Fabrication of microfluidic channels based on melt-electrospinning direct writing
Jun Zeng et al.
MICROFLUIDICS AND NANOFLUIDICS (2018)
Mechanical metamaterials associated with stiffness, rigidity and compressibility: A brief review
Xianglong Yu et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Dimension-Based Design of Melt Electrowritten Scaffolds
Andrei Hrynevich et al.
SMALL (2018)
Large-Scale Direct-Writing of Aligned Nanofibers for Flexible Electronics
Dong Ye et al.
SMALL (2018)
Rational Design of Mouse Models for Cancer Research
Marietta Landgraf et al.
TRENDS IN BIOTECHNOLOGY (2018)
Biofabrication: A Guide to Technology and Terminology
Lorenzo Moroni et al.
TRENDS IN BIOTECHNOLOGY (2018)
Mechanical behavior of a soft hydrogel reinforced with three-dimensional printed microfibre scaffolds
Miguel Castilho et al.
SCIENTIFIC REPORTS (2018)
Morphology control of PLA microfibers and spheres via melt electrospinning
Shu-Xin Yu et al.
MATERIALS RESEARCH EXPRESS (2018)
Design and fabrication of melt electrowritten tubes using intuitive software
Erin McColl et al.
MATERIALS & DESIGN (2018)
Modeling 3D melt electrospinning writing by response surface methodology
Cem Balda Dayan et al.
MATERIALS & DESIGN (2018)
Melt Electrospun Reduced Tungsten Oxide/Polylactic Acid Fiber Membranes as a Photothermal Material for Light-Driven Interfacial Water Evaporation
Tolesa Fita Chala et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Melt Electrowriting Allows Tailored Microstructural and Mechanical Design of Scaffolds to Advance Functional Human Myocardial Tissue Formation
Miguel Castilho et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Regeneration of cellulose dissolved in ionic liquid using laser-heated melt-electrospinning
Huaizhong Xu et al.
CARBOHYDRATE POLYMERS (2018)
Green Electrospun Nanofibers and Their Application in Air Filtration
Dan Lv et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Intravital microscopy of osteolytic progression and therapy response of cancer lesions in the bone
Eleonora Dondossola et al.
SCIENCE TRANSLATIONAL MEDICINE (2018)
Resistive pressure sensor based on cylindrical micro structures in periodically ordered electrospun elastic fibers
Gil-Yong Lee et al.
SMART MATERIALS AND STRUCTURES (2018)
Fabrication of optically active fiber mats via melt electrospinning
John P. Murphy et al.
MRS COMMUNICATIONS (2018)
Melt-electrospinning of Polyphenylene Sulfide
Ying An et al.
FIBERS AND POLYMERS (2018)
Bubble Melt Electrospinning for Production of Polymer Microfibers
Ye-Ming Li et al.
POLYMERS (2018)
Melt Electrospun Bilayered Scaffolds for Tissue Integration of a Suture-Less Inflow Cannula for Rotary Blood Pumps
Sam Liao et al.
ARTIFICIAL ORGANS (2018)
Comparative Characterization of Melt Electrospun Fibers and Films Based on PLA-PHB Blends: Diffusion, Drug Release, and Structural Features
Yong Liu et al.
MACROMOLECULAR SYMPOSIA (2018)
A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects
Bruce K. Gale et al.
INVENTIONS (2018)
Automated 3D bioassembly of micro-tissues for biofabrication of hybrid tissue engineered constructs
N. V. Mekhileri et al.
BIOFABRICATION (2018)
3D printing strategies for peripheral nerve regeneration
Eugen B. Petcu et al.
BIOFABRICATION (2018)
Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique
Junghyuk Ko et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)
Polyolefin Microfiber Based Antibacterial Fibrous Membrane by Forced Assembly Coextrusion
Arifur Rahman et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Examination of the foreign body response to biomaterials by nonlinear intravital microscopy
Eleonora Dondossola et al.
NATURE BIOMEDICAL ENGINEERING (2017)
Self-layering behavior of PET fiber deposition in melt-electrospinning process
Yang Xu et al.
FIBERS AND POLYMERS (2017)
Structure Regulation and Properties of Melt-electrospinning Composite Filter Materials
Ying Shen et al.
FIBERS AND POLYMERS (2017)
New PEEK-WC and PLA membranes for H2 separation
A. Iulianelli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Melt Electrospinning Writing Process Guided by a Printability Number
Filippos Tourlomousis et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Photo and Thermal Cured Silicon-Containing Diethynylbenzene Fibers via Melt Electrospinning with Enhanced Thermal Stability
Zhefu Li et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2017)
Modeling of Downstream Heating in Melt Electrospinning of Polymers
Nikhil Mayadeo et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2017)
Melt electrospinning writing of defined scaffolds using polylactide-poly (ethylene glycol) blends with 45S5 bioactive glass particles
Gernot Hochleitner et al.
MATERIALS LETTERS (2017)
Additive manufacturing with polypropylene microfibers
Jodie N. Haigh et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Engineering a humanized bone organ model in mice to study bone metastases
Laure C. Martine et al.
NATURE PROTOCOLS (2017)
Direct write micro/nano optical fibers by near-field melt electrospinning
Qinnan Chen et al.
OPTICS LETTERS (2017)
Amplified spontaneous emission from a single organic microfiber fabricated by melt electrospinning
Xiaolei Yu et al.
ORGANIC ELECTRONICS (2017)
Melt electrospinning: Electrodynamics and spinnability
Huaizhong Xu et al.
POLYMER (2017)
Life is 3D: Boosting Spheroid Function for Tissue Engineering
Matthias W. Laschke et al.
TRENDS IN BIOTECHNOLOGY (2017)
Portable melt electrospinning apparatus without an extra electricity supply
Xu Yan et al.
RSC ADVANCES (2017)
Effect of melt and solution electrospinning on the formation and structure of poly(vinylidene fluoride) fibres
Hanako Asai et al.
RSC ADVANCES (2017)
Needleless Melt-Electrospinning of Biodegradable Poly(Lactic Acid) Ultrafine Fibers for the Removal of Oil fromWater
Haoyi Li et al.
POLYMERS (2017)
The effect of nozzle-exit-channel shape on resultant fiber diameter in melt-electrospinning
Ahmad Esmaeilirad et al.
MATERIALS RESEARCH EXPRESS (2017)
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Kevin A. Bush et al.
NATURE ENERGY (2017)
Effect of scaffold morphology and cell co-culture on tenogenic differentiation of HADMSC on centrifugal melt electrospun poly (L-lactic acid) fibrous meshes
Shaohua Wu et al.
BIOFABRICATION (2017)
Investigation of the effects of melt electrospinning parameters on the direct-writing fiber size using orthogonal design
Feng-Li He et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)
An Integrated Design, Material, and Fabrication Platform for Engineering Biomechanically and Biologically Functional Soft Tissues
Onur Bas et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printed lattices as an activation and expansion platform for T cell therapy
Bahman Delalat et al.
BIOMATERIALS (2017)
Biofabricated soft network composites for cartilage tissue engineering
Onur Bas et al.
BIOFABRICATION (2017)
Melt electrospinning of daunorubicin hydrochloride-loaded poly (ε-caprolactone) fibrous membrane for tumor therapy
He Lian et al.
BIOACTIVE MATERIALS (2017)
Melt electrowriting with additive manufacturing principles
Paul D. Dalton
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Endosteal-like extracellular matrix expression on melt electrospun written scaffolds
Maria Lourdes Muerza-Cascante et al.
ACTA BIOMATERIALIA (2017)
Additive manufacturing of polymer melts for implantable medical devices and scaffolds
Almoatazbellah Youssef et al.
BIOFABRICATION (2017)
Periosteum tissue engineering in an orthotopic in vivo platform
J. G. Baldwin et al.
BIOMATERIALS (2017)
Interface modified polylactic acid/starch/poly ε-caprolactone antibacterial nanocomposite blends for medical applications
Seyed Mohammad Davachi et al.
CARBOHYDRATE POLYMERS (2017)
Additive Manufacturing of a Photo-Cross-Linkable Polymer via Direct Melt Electrospinning Writing for Producing High Strength Structures
Fei Chen et al.
BIOMACROMOLECULES (2016)
Melt electrospinning process optimization of polylactic acid nanofibers
Amir Doustgani et al.
JOURNAL OF INDUSTRIAL TEXTILES (2016)
Hierarchically Structured Porous Poly(2-oxazoline) Hydrogels
Jodie N. Haigh et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2016)
Large Scaled Fabrication of Microfibers by Air-Suction Assisted Needleless Melt Electrospinning
Hongbo Chen et al.
FIBERS AND POLYMERS (2016)
A portable electrospinning apparatus based on a small solar cell and a hand generator: design, performance and application
Xu Yan et al.
NANOSCALE (2016)
Highly aligned core-shell structured nanofibers for promoting phenotypic expression of vSMCs for vascular regeneration
Huihua Yuan et al.
NANOSCALE (2016)
Micro/nanoscale electrohydrodynamic printing: from 2D to 3D
Bing Zhang et al.
NANOSCALE (2016)
Melt electrospinning today: An opportune time for an emerging polymer process
Toby D. Brown et al.
PROGRESS IN POLYMER SCIENCE (2016)
Poly(ε-caprolactone) Scaffolds Fabricated by Melt Electrospinning for Bone Tissue Engineering
Sascha Zaiss et al.
MATERIALS (2016)
Recent advances in melt electrospinning
Li-Hua Zhang et al.
RSC ADVANCES (2016)
Manufacturing and characterization of encapsulated microfibers with different molecular weight poly(ε-caprolactone) (PCL) resins using a melt electrospinning technique
Jason K. Lee et al.
MATERIALS RESEARCH EXPRESS (2016)
Selective isolation and characterization of primary cells from normal breast and tumors reveal plasticity of adipose derived stem cells
Annika Weigand et al.
BREAST CANCER RESEARCH (2016)
Biofabrication: reappraising the definition of an evolving field
Juergen Groll et al.
BIOFABRICATION (2016)
Hybrid organic-inorganic perovskite composite fibers produced via melt electrospinning
John P. Murphy et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2016)
Development of melt electrohydrodynamic 3D printing for complex microscale poly (ε-caprolactone) scaffolds
Jiankang He et al.
BIOFABRICATION (2016)
Conductive Fiber-Based Ultrasensitive Textile Pressure Sensor for Wearable Electronics
Jaehong Lee et al.
ADVANCED MATERIALS (2015)
Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control
Nikola Ristovski et al.
BIOINTERPHASES (2015)
Enhancing structural integrity of hydrogels by using highly organised melt electrospun fibre constructs
Onur Bas et al.
EUROPEAN POLYMER JOURNAL (2015)
ELECTROSPINNING OF NON-WOVEN MATERIALS FROM THE MELT OF POLYAMIDE-6 WITH ADDED MAGNESIUM, CALCIUM, AND ZINC STEARATES
S. N. Malakhov et al.
FIBRE CHEMISTRY (2015)
Development of Bioactive Packaging Structure Using Melt Electrospinning
Sukhwinder Kaur Bhullar et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2015)
Melt Electrospinning of Small Molecules
Julia C. Singer et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Melt electrospinning of poly(lactic acid) and polycaprolactone microfibers by using a hand-operated Wimshurst generator
Chong-Chong Qin et al.
NANOSCALE (2015)
Melt electrospinning onto cylinders: effects of rotational velocity and collector diameter on morphology of tubular structures
Tomasz Jungst et al.
POLYMER INTERNATIONAL (2015)
Design and fabrication of auxetic stretchable force sensor for hand rehabilitation
Junghyuk Ko et al.
SMART MATERIALS AND STRUCTURES (2015)
Reinforcement of hydrogels using three-dimensionally printed microfibres
Jetze Visser et al.
NATURE COMMUNICATIONS (2015)
Improved fabrication of melt electrospun tissue engineering scaffolds using direct writing and advanced electric field control
Nikola Ristovski et al.
BIOINTERPHASES (2015)
Electrospun biomaterial scaffolds with varied topographies for neuronal differentiation of human-induced pluripotent stem cells
Nima Khadem Mohtaram et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Gernot Hochleitner et al.
BIOFABRICATION (2015)
Mimicking breast cancer-induced bone metastasis in vivo: current transplantation models and advanced humanized strategies
Laure Thibaudeau et al.
CANCER AND METASTASIS REVIEWS (2014)
A tissue-engineered humanized xenograft model of human breast cancer metastasis to bone
Laure Thibaudeau et al.
DISEASE MODELS & MECHANISMS (2014)
Melt electrospinning of poly(ε-caprolactone) scaffolds: Phenomenological observations associated with collection and direct writing
Toby D. Brown et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
P. Martins et al.
PROGRESS IN POLYMER SCIENCE (2014)
A review of piezoelectric polymers as functional materials for electromechanical transducers
Khaled S. Ramadan et al.
SMART MATERIALS AND STRUCTURES (2014)
Network dynamics of 3D engineered neuronal cultures: a new experimental model for in-vitro electrophysiology
Monica Frega et al.
SCIENTIFIC REPORTS (2014)
Drug-releasing implants: current progress, challenges and perspectives
Abel Santos et al.
JOURNAL OF MATERIALS CHEMISTRY B (2014)
Large-Area Printing of Optical Gratings and 3D Photonic Crystals Using Solution-Processable Nanoparticle/Polymer Composites
Michael R. Beaulieu et al.
ACS PHOTONICS (2014)
How smart do biomaterials need to be? A translational science and clinical point of view
Boris Michael Holzapfel et al.
ADVANCED DRUG DELIVERY REVIEWS (2013)
Solvent-free melt electrospinning for preparation of fast dissolving drug delivery system and comparison with solvent-based electrospun and melt extruded systems
Zsombor Kristof Nagy et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Electrohydrodynamic direct-writing
YongAn Huang et al.
NANOSCALE (2013)
Dermal fibroblast infiltration of poly(ε-caprolactone) scaffolds fabricated by melt electrospinning in a direct writing mode
Brooke L. Farrugia et al.
BIOFABRICATION (2013)
Electrospinning versus fibre production methods: from specifics to technological convergence
C. J. Luo et al.
CHEMICAL SOCIETY REVIEWS (2012)
Needleless Melt-Electrospinning of Polypropylene Nanofibres
Jian Fang et al.
JOURNAL OF NANOMATERIALS (2012)
Drug delivery systems: An updated review
Gaurav Tiwari et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICAL INVESTIGATION (2012)
Direct Writing By Way of Melt Electrospinning
Toby D. Brown et al.
ADVANCED MATERIALS (2011)
On the way to clean and safe electrospinning-green electrospinning: emulsion and suspension electrospinning
Seema Agarwal et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2011)
Nanofibers from gas-assisted polymer melt electrospinning
Eduard Zhmayev et al.
POLYMER (2010)
Modeling of melt electrospinning for semi-crystalline polymers
Eduard Zhmayev et al.
POLYMER (2010)
Neural interactions with materials
Paul Donald Dalton et al.
FRONTIERS IN BIOSCIENCE-LANDMARK (2009)
Properties of High Modulus PEEK Yarns for Aerospace Applications
R. Indu Shekar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Engineering on the Straight and Narrow: The Mechanics of Nanofibrous Assemblies for Fiber-Reinforced Tissue Regeneration
Robert L. Mauck et al.
TISSUE ENGINEERING PART B-REVIEWS (2009)
Meandering instability of a viscous thread
Stephen W. Morris et al.
PHYSICAL REVIEW E (2008)
Poly(lactide) nanofibers produced by a melt-electrospinning system with a laser melting device
Nobuo Ogata et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Mineralization capacity of Runx2/Cbfa1-genetically engineered fibroblasts is scaffold dependent
Jennifer E. Phillips et al.
BIOMATERIALS (2006)
Applications of polymer nanofibers in biomedicine and biotechnology
J Venugopal et al.
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY (2005)
Direct synthesis of sulfonated aromatic poly(ether ether ketone) proton exchange membranes for fuel cell applications
M Gil et al.
JOURNAL OF MEMBRANE SCIENCE (2004)
Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes
PX Xing et al.
JOURNAL OF MEMBRANE SCIENCE (2004)
Contact guidance induced organization of extracellular matrix
ME Manwaring et al.
BIOMATERIALS (2004)