Related references
Note: Only part of the references are listed.A definition of bioinks and their distinction from biomaterial inks
J. Groll et al.
BIOFABRICATION (2019)
Controlling the Surface Properties of an Inkjet-Printed Reactive Oxygen Species Scavenger for Flexible Bioelectronics Applications in Neural Resilience
Ashkan Shafiee et al.
IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY (2019)
Human stem cell based corneal tissue mimicking structures using laser-assisted 3D bioprinting and functional bioinks
Anni Sorkio et al.
BIOMATERIALS (2018)
Biofabrication: A Guide to Technology and Terminology
Lorenzo Moroni et al.
TRENDS IN BIOTECHNOLOGY (2018)
Spraying dynamics in continuous wave laser printing of conductive inks
Pol Sopena et al.
SCIENTIFIC REPORTS (2018)
Optimization of gelatin-alginate composite bioink printability using rheological parameters: a systematic approach
Teng Gao et al.
BIOFABRICATION (2018)
Biosensing Technologies for Medical Applications, Manufacturing, and Regenerative Medicine
Ashkan Shafiee et al.
CURRENT STEM CELL REPORTS (2018)
Self-assembled human osseous cell sheets as living biopapers for the laser-assisted bioprinting of human endothelial cells
F. Kawecki et al.
BIOFABRICATION (2018)
Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting
Nicanor I. Moldovan et al.
TISSUE ENGINEERING PART B-REVIEWS (2017)
Extrusion Bioprinting of Shear-Thinning Gelatin Methacryloyl Bioinks
Wanjun Liu et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Single cell isolation process with laser induced forward transfer
Yu Deng et al.
JOURNAL OF BIOLOGICAL ENGINEERING (2017)
Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability
Naomi Paxton et al.
BIOFABRICATION (2017)
Femtosecond versus picosecond laser pulses for film-free laser bioprinting
Stephane Petit et al.
APPLIED OPTICS (2017)
Laser-assisted bioprinting at different wavelengths and pulse durations with a metal dynamic release layer: A parametric study
Lothar Koch et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2017)
Comparison of biomaterial-dependent and -independent bioprinting methods for cardiovascular medicine
Leni Moldovan et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Effects of living cells on the bioink printability during laser printing
Zhengyi Zhang et al.
BIOMICROFLUIDICS (2017)
Research on rheological properties and extrusion behavior of aqueous alumina paste in paste-extrusion-based SFF processes
Hongjun Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
Andreas Blaeser et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Study of Impingement Types and Printing Quality during Laser Printing of Viscoelastic Alginate Solutions
Zhengyi Zhang et al.
LANGMUIR (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Printing Technologies for Medical Applications
Ashkan Shafiee et al.
TRENDS IN MOLECULAR MEDICINE (2016)
A Mathematical Model on the Resolution of Extrusion Bioprinting for the Development of New Bioinks
Ratima Suntornnond et al.
MATERIALS (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Liliang Ouyang et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Research on the printability of hydrogels in 3D bioprinting
Yong He et al.
SCIENTIFIC REPORTS (2016)
Effective parameters for film-free femtosecond laser assisted bioprinting
H. Desrus et al.
APPLIED OPTICS (2016)
Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells
Liliang Ouyang et al.
BIOFABRICATION (2016)
Yield stress determines bioprintability of hydrogels based on gelatin-methacryloyl and gellan gum for cartilage bioprinting
Vivian H. M. Mouser et al.
BIOFABRICATION (2016)
Wireless Flexible Smart Bandage for Continuous Monitoring of Wound Oxygenation
Pooria Mostafalu et al.
IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS (2015)
Time-Resolved Imaging Study of Jetting Dynamics during Laser Printing of Viscoelastic Alginate Solutions
Zhengyi Zhang et al.
LANGMUIR (2015)
Towards real-time 3D ultrasound planning and personalized 3D printing for breast HDR brachytherapy treatment
Eric Poulin et al.
RADIOTHERAPY AND ONCOLOGY (2015)
Post-deposition bioink self-assembly: a quantitative study
Ashkan Shafiee et al.
BIOFABRICATION (2015)
Novel sensory surface for creatine kinase electrochemical detection
Felismina T. C. Moreira et al.
BIOSENSORS & BIOELECTRONICS (2014)
RapidSplint: virtual splint generation for orthognathic surgery - results of a pilot series
Nicolai Adolphs et al.
COMPUTER AIDED SURGERY (2014)
New Technique for Developing a Proton Range Compensator With Use of a 3-Dimensional Printer
Sang Gyu Ju et al.
INTERNATIONAL JOURNAL OF RADIATION ONCOLOGY BIOLOGY PHYSICS (2014)
Open-source three-dimensional printing of biodegradable polymer scaffolds for tissue engineering
Jordan E. Trachtenberg et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Accuracy of three-dimensional, paper-based models generated using a low-cost, three-dimensional printer
Raphael Olszewski et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2014)
Inkjet printing for pharmaceutical applications
Ryan D. Boehm et al.
MATERIALS TODAY (2014)
Predictive modeling of post bioprinting structure formation
Matthew McCune et al.
SOFT MATTER (2014)
Physical Models of Renal Malignancies Using Standard Cross-sectional Imaging and 3-Dimensional Printers: A Pilot Study
Jonathan L. Silberstein et al.
UROLOGY (2014)
Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing
Barbara Lorber et al.
BIOFABRICATION (2014)
Controlling laser-induced jet formation for bioprinting mesenchymal stem cells with high viability and high resolution
Muhammad Ali et al.
BIOFABRICATION (2014)
Forces in Tissue Morphogenesis and Patterning
Carl-Philipp Heisenberg et al.
CELL (2013)
Accuracy of Upper Jaw Positioning With Intermediate Splint Fabrication After Virtual Planning in Bimaxillary Orthognathic Surgery
Yi Sun et al.
JOURNAL OF CRANIOFACIAL SURGERY (2013)
Three-Dimensional Print of a Liver for Preoperative Planning in Living Donor Liver Transplantation
Nizar N. Zein et al.
LIVER TRANSPLANTATION (2013)
Developmental Engineering the Kidney: Leveraging Principles of Morphogenesis for Renal Regeneration
Joydeep Basu et al.
BIRTH DEFECTS RESEARCH PART C-EMBRYO TODAY-REVIEWS (2012)
Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques
Natalja Genina et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2012)
Colloquium: Modeling the dynamics of multicellular systems: Application to tissue engineering
Ioan Kosztin et al.
REVIEWS OF MODERN PHYSICS (2012)
Toward engineering functional organ modules by additive manufacturing
Francoise Marga et al.
BIOFABRICATION (2012)
Effect of laser energy, substrate film thickness and bioink viscosity on viability of endothelial cells printed by Laser-Assisted Bioprinting
Sylvain Catros et al.
APPLIED SURFACE SCIENCE (2011)
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Ralf Gaebel et al.
BIOMATERIALS (2011)
Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Martin Gruene et al.
BIOMEDICAL ENGINEERING ONLINE (2011)
Finite element analysis of blister formation in laser-induced forward transfer
Nicholas T. Kattamis et al.
JOURNAL OF MATERIALS RESEARCH (2011)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Coaction of intercellular adhesion and cortical tension specifies tissue surface tension
M. Lisa Manning et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
Bioprinting by laser-induced forward transfer for tissue engineering applications: jet formation modeling
C. Mezel et al.
BIOFABRICATION (2010)
A droplet-based building block approach for bladder smooth muscle cell (SMC) proliferation
F. Xu et al.
BIOFABRICATION (2010)
Tissue engineering by self-assembly and bio-printing of living cells
Karoly Jakab et al.
BIOFABRICATION (2010)
Scaffold-free vascular tissue engineering using bioprinting
Cyrille Norotte et al.
BIOMATERIALS (2009)
Organ printing: Tissue spheroids as building blocks
Vladimir Mironov et al.
BIOMATERIALS (2009)
Characterization of cell viability during bioprinting processes
Kalyani Nair et al.
Biotechnology Journal (2009)
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Developmental Engineering: A New Paradigm for the Design and Manufacturing of Cell-Based Products. Part I: From Three-Dimensional Cell Growth to Biomimetics of In Vivo Development
Petros Lenas et al.
TISSUE ENGINEERING PART B-REVIEWS (2009)
Limb bud and flank mesoderm have distinct physical phenotypes that may contribute to limb budding
Brooke J. Damon et al.
DEVELOPMENTAL BIOLOGY (2008)
Experimental evaluation of apparent tissue surface tension based on the exact solution of the Laplace equation
C. Norotte et al.
EPL (2008)
Study of impact-induced mechanical effects in cell direct writing using smooth particle hydrodynamic method
Wei Wang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Effects of pulse voltage on inkjet printing of a silver nanopowder suspension
M. H. Tsai et al.
NANOTECHNOLOGY (2008)
Tissue engineering by self-assembly of cells printed into topologically defined structures
Karoly Jakab et al.
TISSUE ENGINEERING PART A (2008)
Cell surface mechanics and the control of cell shape, tissue patterns and morphogenesis
Thomas Lecuit et al.
NATURE REVIEWS MOLECULAR CELL BIOLOGY (2007)
Tissue engineering and developmental biology: Going biomimetic
Donald E. Ingber et al.
TISSUE ENGINEERING (2006)
The interplay of cell-cell and cell-matrix interactions in the invasive properties of brain tumors
Balazs Hegedus et al.
BIOPHYSICAL JOURNAL (2006)
Tissue fusion and cell sorting in embryonic development and disease:: biomedical implications
Jose M. Perez-Pomares et al.
BIOESSAYS (2006)
Laser-guided direct writing for three-dimensional tissue engineering
Y Nahmias et al.
BIOTECHNOLOGY AND BIOENGINEERING (2005)
Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors
N Reis et al.
JOURNAL OF APPLIED PHYSICS (2005)
Biophysical measurement of brain tumor cohesion
BS Winters et al.
INTERNATIONAL JOURNAL OF CANCER (2005)
The differential adhesion hypothesis: a direct evaluation
RA Foty et al.
DEVELOPMENTAL BIOLOGY (2005)
Engineering biological structures of prescribed shape using self-assembling multicellular systems
K Jakab et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2004)
Inkjet printing of polymer thin film transistors
T Kawase et al.
THIN SOLID FILMS (2003)
Cadherin-mediated cell adhesion and tissue segregation: qualitative and quantitative determinants
D Duguay et al.
DEVELOPMENTAL BIOLOGY (2003)
Time evolution of liquid drop impact onto solid, dry surfaces
R Rioboo et al.
EXPERIMENTS IN FLUIDS (2002)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)
Outcomes from a drop impact on solid surfaces
R Rioboo et al.
ATOMIZATION AND SPRAYS (2001)
Cell sorting is analogous to phase ordering in fluids
DA Beysens et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2000)