Related references
Note: Only part of the references are listed.Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Ross Cunningham et al.
SCIENCE (2019)
The effect of powder oxidation on defect formation in laser additive manufacturing
Chu Lun Alex Leung et al.
ACTA MATERIALIA (2019)
Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
Qilin Guo et al.
ACTA MATERIALIA (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Formation mechanisms of pores and spatters during laser deep penetration welding
Joerg Volpp
JOURNAL OF LASER APPLICATIONS (2018)
Analysis and possible estimation of keyhole depths evolution, using laser operating parameters and material properties
Remy Fabbro et al.
JOURNAL OF LASER APPLICATIONS (2018)
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Chu Lun Alex Leung et al.
NATURE COMMUNICATIONS (2018)
Ultrafast X-ray imaging of laser-metal additive manufacturing processes
Niranjan D. Parab et al.
JOURNAL OF SYNCHROTRON RADIATION (2018)
Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal
Brian J. Simonds et al.
PHYSICAL REVIEW APPLIED (2018)
Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing
Hang Zheng et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
Cang Zhao et al.
SCIENTIFIC REPORTS (2017)
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
Sonny Ly et al.
SCIENTIFIC REPORTS (2017)
Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting
Wentao Yan et al.
ACTA MATERIALIA (2017)
Denudation of metal powder layers in laser powder bed fusion processes
Manyalibo J. Matthews et al.
ACTA MATERIALIA (2016)
Thermographic measurements of the commercial laser powder bed fusion process at NIST
Brandon Lane et al.
RAPID PROTOTYPING JOURNAL (2016)
Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process
Alexander Ladewig et al.
ADDITIVE MANUFACTURING (2016)
A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V
Marco Simonelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
A. Bauereiss et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
A microscopic steam engine implemented in an optical tweezer
Pedro A. Quinto-Su
NATURE COMMUNICATIONS (2014)
Characterization of Metal Powders Used for Additive Manufacturing
J. A. Slotwinski et al.
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2014)
Observation of spatter formation mechanisms in high-power fiber laser welding of thick plate
M. J. Zhang et al.
APPLIED SURFACE SCIENCE (2013)
A new approach to compute multi-reflections of laser beam in a keyhole for heat transfer and fluid flow modelling in laser welding
Mickael Courtois et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)
Investigation of keyhole plume and molten pool based on a three-dimensional dynamic model with sharp interface formulation
Wenda Tan et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)
Fundamental consolidation mechanisms during selective beam melting of powders
Carolin Koerner et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
High-speed X-Ray analysis of spatter formation in laser welding of copper
A. Heider et al.
LASERS IN MANUFACTURING (LIM 2013) (2013)
Gas flow effects on selective laser melting (SLM) manufacturing performance
B. Ferrar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Spatter in laser welding
A. F. H. Kaplan et al.
JOURNAL OF LASER APPLICATIONS (2011)
Modeling of macroscopic melt layer splashing during plasma instabilities
G. Miloshevsky et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Melt pool and keyhole behaviour analysis for deep penetration laser welding
R. Fabbro
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
Serial time-encoded amplified imaging for real-time observation of fast dynamic phenomena
K. Goda et al.
NATURE (2009)
Surface Tension and Viscosity of Industrial Ti-Alloys Measured by the Oscillating Drop Method on Board Parabolic Flights
Rainer K. Wunderlich
HIGH TEMPERATURE MATERIALS AND PROCESSES (2008)
Flash-boiling atomization
Eran Sher et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)
Physics of liquid jets
Jens Eggers et al.
REPORTS ON PROGRESS IN PHYSICS (2008)
Time-resolved shadowgraphs of material ejection in intense femtosecond laser ablation of aluminum
Nan Zhang et al.
PHYSICAL REVIEW LETTERS (2007)
Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti-6Al-4V, 304L stainless steel and vanadium
R. Rai et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)
Short-pulse laser ablation of solids: From phase explosion to fragmentation
P Lorazo et al.
PHYSICAL REVIEW LETTERS (2003)
Prevention of welding defect by side gas flow and its monitoring method in continuous wave Nd:YAG laser welding
K Kamimuki et al.
JOURNAL OF LASER APPLICATIONS (2002)
Mechanism of keyhole formation and stability in stationary laser welding
JY Lee et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2002)
Share Paper
