Related references
Note: Only part of the references are listed.Low-temperature-solderable intermetallic nanoparticles for 3D printable flexible electronics
Ying Zhong et al.
ACTA MATERIALIA (2019)
Highly Conductive Nano-Silver Circuits by Inkjet Printing
Dongbin Zhu et al.
JOURNAL OF ELECTRONIC MATERIALS (2018)
A Study on the Optimization of Anisotropic Conductive Films for Sn-3Ag-0.5Cu-Based Flex-on-Board Application at a 250 °C Bonding Temperature
Shuye Zhang et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2018)
Science and research policy at the end of Moore's law
Hassan N. Khan et al.
NATURE ELECTRONICS (2018)
Flash-Induced Self-Limited Plasmonic Welding of Silver Nanowire Network for Transparent Flexible Energy Harvester
Jung Hwan Park et al.
ADVANCED MATERIALS (2017)
CMOS Scaling Trends and Beyond
Mark T. Bohr et al.
IEEE MICRO (2017)
A Review on Laser Processing in Electronic and MEMS Packaging
Kaysar Rahim et al.
JOURNAL OF ELECTRONIC PACKAGING (2017)
3D polymer objects with electronic components interconnected via conformally printed electrodes
Yejin Jo et al.
NANOSCALE (2017)
Fabrication of metal/semiconductor nanocomposites by selective laser nano-welding
Huiwu Yu et al.
NANOSCALE (2017)
Two-component spin-coated Ag/CNT composite films based on a silver heterogeneous nucleation mechanism adhesion-enhanced by mechanical interlocking and chemical grafting
Yang Zhang et al.
NANOTECHNOLOGY (2017)
Synthesis of a Soft Nanocomposite for Flexible, Wearable Bioelectronics
Fabrice Fondjo et al.
2017 IEEE 67TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC 2017) (2017)
The End of Moore's Law: A New Beginning for Information Technology
Thomas N. Theis et al.
COMPUTING IN SCIENCE & ENGINEERING (2017)
Reshaping, Fragmentation, and Assembly of Gold Nanoparticles Assisted by Pulse Lasers
Guillermo Gonzalez-Rubio et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
Substrateless Welding of Self-Assembled Silver Nanowires at Air/Water Interface
Hang Hu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Cooling thermal parameters and microstructure features of directionally solidified ternary Sn-Bi-(Cu,Ag) solder alloys
Bismarck L. Silva et al.
MATERIALS CHARACTERIZATION (2016)
Vertically aligned CNT-Cu nano-composite material for stacked through-silicon-via interconnects
Shuangxi Sun et al.
NANOTECHNOLOGY (2016)
Failure mechanism of the polymer infiltration of carbon nanotube forests
Jakob Buchheim et al.
NANOTECHNOLOGY (2016)
Joint Morphologies and Failure Mechanisms of Anisotropic Conductive Films (ACFs) During a Power Handling Capability Test for Flex-On-Board Applications
Shuye Zhang et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2016)
Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system
Janghoon Park et al.
SCIENTIFIC REPORTS (2016)
Reliability of MEMS: A perspective on failure mechanisms, improvement solutions and best practices at development level
Jacopo Iannacci
DISPLAYS (2015)
Effect of Thickness on Surface Morphology of Silver Nanoparticle Layer During Furnace Sintering
Yoon Jae Moon et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Femtosecond Laser-Controlled Tip-to-Tip Assembly and Welding of Gold Nanorods
Guillermo Gonzalez-Rubio et al.
NANO LETTERS (2015)
Improving the fracture toughness and the strength of epoxy using nanomaterials - a review of the current status
N. Domun et al.
NANOSCALE (2015)
A Study on the Solder Ball Size and Content Effects of Solder ACFs for Flex-on-Board Assembly Applications Using Ultrasonic Bonding
Shuye Zhang et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2015)
Roll-to-roll infrared (IR) drying and sintering of an inkjet-printed silver nanoparticle ink within 1 second (vol 3, pg 11815, 2015)
Enrico Sowade et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Improvement of graphene-metal contact resistance by introducing edge contacts at graphene under metal
Seung Min Song et al.
APPLIED PHYSICS LETTERS (2014)
Beyond CMOS: heterogeneous integration of III-V devices, RF MEMS and other dissimilar materials/devices with Si CMOS to create intelligent microsystems
Thomas E. Kazior
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)
Threading plasmonic nanoparticle strings with light
Lars O. Herrmann et al.
NATURE COMMUNICATIONS (2014)
Simulation and prediction of the thermal sintering behavior for a silver nanoparticle ink based on experimental input
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Metallurgical challenges in microelectronic 3D IC packaging technology for future consumer electronic products
K. N. Tu et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2013)
Rapid pressureless low-temperature sintering of Ag nanoparticles for high-power density electronic packaging
Shuai Wang et al.
SCRIPTA MATERIALIA (2013)
Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Room-temperature pressureless bonding with silver nanowire paste: towards organic electronic and heat-sensitive functional devices packaging
Peng Peng et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Conductive patterns on plastic substrates by sequential inkjet printing of silver nanoparticles and electrolyte sintering solutions
Michael Layani et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Plasmonic Color Filters for CMOS Image Sensor Applications
Sozo Yokogawa et al.
NANO LETTERS (2012)
Self-limited plasmonic welding of silver nanowire junctions
Erik C. Garnett et al.
NATURE MATERIALS (2012)
Utilizing the thermodynamic nanoparticle size effects for low temperature Pb-free solder
John P. Koppes et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2012)
Micro- and nano-manufacturing: Challenges and opportunities
S. Dimov et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2012)
Pressureless bonding process using Ag nanoparticle paste for flexible electronics packaging
Jianfeng Yan et al.
SCRIPTA MATERIALIA (2012)
Visible-light-enhanced catalytic oxidation reactions on plasmonic silver nanostructures
Phillip Christopher et al.
NATURE CHEMISTRY (2011)
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Shlomo Magdassi et al.
ACS NANO (2010)
Recent Advances in Research on Carbon Nanotube-Polymer Composites
Michele T. Byrne et al.
ADVANCED MATERIALS (2010)
Contact resistivity and current flow path at metal/graphene contact
K. Nagashio et al.
APPLIED PHYSICS LETTERS (2010)
Effect of rapid solidification on mechanical properties of a lead free Sn-3.5Ag solder
R. M. Shalaby
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Multiscale Hybrid Micro-Nanocomposites Based on Carbon Nanotubes and Carbon Fibers
Fawad Inam et al.
JOURNAL OF NANOMATERIALS (2010)
In situ TEM study of grain growth in nanocrystalline copper thin films
S. Simoes et al.
NANOTECHNOLOGY (2010)
Melting and solidification properties of the nanoparticles of Sn3.0Ag0.5Cu lead-free solder alloy
Changdong Zou et al.
MATERIALS CHARACTERIZATION (2010)
Plasmonics for improved photovoltaic devices
Harry A. Atwater et al.
NATURE MATERIALS (2010)
APPLIED PHYSICS The Case for Plasmonics
Mark L. Brongersma et al.
SCIENCE (2010)
Microwave Flash Sintering of Inkjet-Printed Silver Tracks on Polymer Substrates
Jolke Perelaer et al.
ADVANCED MATERIALS (2009)
Nanoparticles of the Lead-free Solder Alloy Sn-3.0Ag-0.5Cu with Large Melting Temperature Depression
Chang Dong Zou et al.
JOURNAL OF ELECTRONIC MATERIALS (2009)
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Ingo Reinhold et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
One-step inkjet printing of conductive silver tracks on polymer substrates
Jolke Perelaer et al.
NANOTECHNOLOGY (2009)
High volume fraction carbon nanotube-epoxy composites
Z. Spitalsky et al.
NANOTECHNOLOGY (2009)
A novel structure for carbon nanotube reinforced alumina composites with improved mechanical properties
G. Yamamoto et al.
NANOTECHNOLOGY (2008)
Synthesis and thermal and wetting properties of Tin/Silver alloy nanoparticles for low melting point lead-free solders
Hongjin Jiang et al.
CHEMISTRY OF MATERIALS (2007)
Metal-polymer composite interconnections for ultra fine-pitch wafer level packaging
Ankur O. Aggarwal et al.
IEEE TRANSACTIONS ON ADVANCED PACKAGING (2007)
Inkjet printable nanosilver suspensions for enhanced sintering quality in rapid manufacturing
John G. Bai et al.
NANOTECHNOLOGY (2007)
Label-free immunodetection with CMOS-compatible semiconducting nanowires
Eric Stern et al.
NATURE (2007)
Size-dependent melting properties of tin nanoparticles
Hongjin Jiang et al.
CHEMICAL PHYSICS LETTERS (2006)
Ink-jet printing and microwave sintering of conductive silver tracks
Jolke Perelaer et al.
ADVANCED MATERIALS (2006)
Carbon nanotube based composites for electronic applications: CNT-conducting polymers, CNT-Cu
N. Ferrer-Anglada et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2006)
Plasmonics: Merging photonics and electronics at nanoscale dimensions
E Ozbay
SCIENCE (2006)
Process integration for through-silicon vias
S Spiesshoefer et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2005)
A unified view of propagating and localized surface plasmon resonance biosensors
AJ Haes et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2004)
Surface plasmon subwavelength optics
WL Barnes et al.
NATURE (2003)
Electrochemical synthesis of silver nanoparticles
L Rodríguez-Sánchez et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2000)