Related references
Note: Only part of the references are listed.Abutment screw loosening in angulation-correcting implants: An in vitro study
Elena Hotinski et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
Influence of the difference between implant body and screw materials on abutment screw loosening
Ryusuke Shinohara et al.
DENTAL MATERIALS JOURNAL (2019)
Influence of different implant-abutment connection designs on the mechanical and biological behavior of single-tooth implants in the maxillary esthetic zone: A systematic review
Bruna M. Vetromilla et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
Does the Presence of a Cantilever Influence the Survival and Success of Partial Implant-Supported Dental Prostheses? Systematic Review and Meta-Analysis
Emily Vivianne Freitas da Silva et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2018)
Original vs. non-original abutments for screw-retained single implant crowns: An in vitro evaluation of internal fit, mechanical behaviour and screw loosening
Raquel Alonso-Perez et al.
CLINICAL ORAL IMPLANTS RESEARCH (2018)
Effect of different angulations and collar lengths of conical hybrid implant abutment on screw loosening after dynamic cyclic loading
Mai Ahmed Yousry El-Sheikh et al.
INTERNATIONAL JOURNAL OF IMPLANT DENTISTRY (2018)
Bruxism and dental implant treatment complications: a retrospective comparative study of 98 bruxer patients and a matched group
Bruno Ramos Chrcanovic et al.
CLINICAL ORAL IMPLANTS RESEARCH (2017)
An In Vitro Evaluation of the Loosening of Different Interchangeable Abutments in Internal-Connection-Type Implants
Ji-Man Park et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2017)
Effect of lubricant on the reliability of dental implant abutment screw joint: An in vitro laboratory and three-dimension finite element analysis
Tingting Wu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Comparison of fit accuracy and torque maintenance of zirconia and titanium abutments for internal tri-channel and external-hex implant connections
Hakimeh Siadat et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2017)
The Effect of Tissue Entrapment on Screw Loosening at the Implant/Abutment Interface of External- and Internal-Connection Implants: An In Vitro Study
Helios A. Zeno et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2016)
Influence of eccentric cyclic loading on implant components: Comparison between external joint system and internal joint system
Kei Sakamoto et al.
DENTAL MATERIALS JOURNAL (2016)
Internal-vs External-Connection Single Implants: A Retrospective Study in an Italian Population Treated by Certified Prosthodontists
Paolo Vigolo et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2016)
A 5-Year Retrospective Assay of Implant Treatments and Complications in Private Practice: The Restorative Complications of Single and Short-Span Implant-Supported Fixed Prostheses
Jason Hsuan-Yu Wang et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2016)
Effect of cantilever length and alloy framework on the stress distribution in peri-implant area of cantilevered implant-supported fixed partial dentures
Valdey Suedam et al.
JOURNAL OF APPLIED ORAL SCIENCE (2016)
Abutment screw loosening of endosseous dental implant body/abutment joint by cyclic torsional loading test at the initial stage
Yasuhiro Katsuta et al.
DENTAL MATERIALS JOURNAL (2015)
Torque Loss of Different Abutment Sizes Before and After Cyclic Loading
Izabela Cristina Mauricio Moris et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2015)
The Effect of Contamination of Implant Screws on Reverse Torque
Hung-Wen Lee et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2015)
Does Abutment Collar Length Affect Abutment Screw Loosening After Cyclic Loading?
Hakimeh Siadat et al.
JOURNAL OF ORAL IMPLANTOLOGY (2015)
Complication incidence of two implant systems up to six years: a comparison between internal and external connection implants
Sung-Wook Chae et al.
JOURNAL OF PERIODONTAL AND IMPLANT SCIENCE (2015)
The Potential Risk of Conical Implant-Abutment Connections: The Antirotational Ability of Cowell Implant System
Kuang-Ta Yao et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2015)
Mechanical Comparison of Experimental Conical-Head Abutment Screws with Conventional Flat-Head Abutment Screws for External-Hex and Internal Tri-Channel Implant Connections: An In Vitro Evaluation of Loosening Torque
Abílio Ricciardi Coppedê et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2014)
Effect of Abutment Screw Surface Treatment on Reliability of Implant-Supported Crowns
Rodolfo Bruniera Anchieta et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2014)
Clinical Performance of Screw-Versus Cement-Retained Fixed Implant-Supported Reconstructions-A Systematic Review
Julia-Gabriela Wittneben et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2014)
Systematic Review of the Survival Rate and Incidence of Biologic, Technical, and Esthetic Complications of Single Implant Abutments Supporting Fixed Prostheses
Anja Zembic et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2014)
The Effect of Different Implant-Abutment Connections on Screw Joint Stability
Konstantinos X. Michalakis et al.
JOURNAL OF ORAL IMPLANTOLOGY (2014)
Influence of the implant-abutment connection design and diameter on the screw joint stability
Hyon-Mo Shin et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2014)
Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems
Jae-Young Jo et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2014)
Correlation between microleakage and screw loosening at implant-abutment connection
Cem Sahin et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2014)
Abutment Rotational Freedom Evaluation of External Hexagon Single-Implant Restorations after Mechanical Cycling
Marcela C. Junqueira et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2013)
Reliability and failure modes of internal conical dental implant connections
Amilcar C. Freitas-Junior et al.
CLINICAL ORAL IMPLANTS RESEARCH (2013)
A Comparison of Precision of Fit, Rotational Freedom, and Torque Loss with Copy-Milled Zirconia and Prefabricated Titanium Abutments
Marzieh Alikhasi et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2013)
Analysis of Dimensional Changes in the Screw and the Surface Topography at the Interface of a Titanium Screw and a Zirconia Abutment Under Cyclic Loading: An In Vitro Study
Ajay Dhingra et al.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS (2013)
Torque removal evaluation of prosthetic screws after tightening and loosening cycles: an in vitro study
Mayra Cardoso et al.
CLINICAL ORAL IMPLANTS RESEARCH (2012)
Internal vs. external connections for abutments/reconstructions: a systematic review
Stefano Gracis et al.
CLINICAL ORAL IMPLANTS RESEARCH (2012)
Cemented and screw-retained implant reconstructions: a systematic review of the survival and complication rates
Irena Sailer et al.
CLINICAL ORAL IMPLANTS RESEARCH (2012)
Systematic review of the survival rate and the incidence of biological, technical, and aesthetic complications of single crowns on implants reported in longitudinal studies with a mean follow-up of 5 years
Ronald E. Jung et al.
CLINICAL ORAL IMPLANTS RESEARCH (2012)
A systematic review of the survival and complication rates of implant-supported fixed dental prostheses (FDPs) after a mean observation period of at least 5 years
Bjarni E. Pjetursson et al.
CLINICAL ORAL IMPLANTS RESEARCH (2012)
Preload Evaluation of Different Screws in External Hexagon Joint
Wirley Goncalves Assuncao et al.
IMPLANT DENTISTRY (2012)
Evaluation of Torque Maintenance of Abutment and Cylinder Screws With Morse Taper Implants
Mayara Barbosa Ferreira et al.
JOURNAL OF CRANIOFACIAL SURGERY (2012)
Effects of Different Abutment Connection Designs on the Stress Distribution Around Five Different Implants: A 3-Dimensional Finite Element Analysis
Ali Balik et al.
JOURNAL OF ORAL IMPLANTOLOGY (2012)
Long-term outcome of dental implants placed in revascularized fibula free flaps used for the reconstruction of maxillo-mandibular defects due to extreme atrophy
Matteo Chiapasco et al.
CLINICAL ORAL IMPLANTS RESEARCH (2011)
Effect of unilateral misfit on preload of retention screws of implant-supported prostheses submitted to mechanical cycling
Wirley Goncalves Assuncao et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2011)
Evaluation of Rotational Freedom of In-Ceram Ceramic Blank Abutments Before and After Infiltration
Philippe Aramouni et al.
IMPLANT DENTISTRY (2010)
Effects of Abutment Screw Coating on Implant Preload
Jae-Kyoung Park et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2010)
The change of rotational freedom following different insertion torques in three implant systems with implant driver
Joo-Hyun Kwon et al.
Journal of Advanced Prosthodontics (2010)
Influence of lateral-oblique cyclic loading on abutment screw loosening of internal and external hexagon implants
Takuma Tsuge et al.
DENTAL MATERIALS JOURNAL (2009)
Effect of Misfit on Preload Maintenance of Retention Screws of Implant-Supported Prostheses
Wirley Goncalves Assuncao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2009)
THE DYNAMIC NATURES OF IMPLANT LOADING
Rui-Feng Wang et al.
JOURNAL OF PROSTHETIC DENTISTRY (2009)
A systematic review of the 5-year survival and complication rates of implant-supported single crowns
Ronald E. Jung et al.
CLINICAL ORAL IMPLANTS RESEARCH (2008)
Preload and torque removal evaluation of three different abutment screws for single standing implant restorations
Rafael Augusto Stuker et al.
JOURNAL OF APPLIED ORAL SCIENCE (2008)
Fatigue characteristics of five types of implant-abutment joint designs
Il Song Park et al.
METALS AND MATERIALS INTERNATIONAL (2008)
Comparison of survival and complication rates of tooth-supported fixed dental prostheses (FDPs) and implant-supported FDPs and single crowns (SCs)
Bjarni E. Pjetursson et al.
CLINICAL ORAL IMPLANTS RESEARCH (2007)
Long-term results of jaw reconstruction with microsurgical fibula grafts and dental implants
Ali Gbara et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2007)
Influence of the coating material on the loosing of dental implant abutment screw joints
C. N. Elias et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
An atomistic approach to the initiation mechanism of galling
L. Vitos et al.
COMPUTATIONAL MATERIALS SCIENCE (2006)
Influence of implant/abutment joint designs on abutment screw loosening in a dental implant system
T Kitagawa et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2005)
Clinical complications with implants and implant prostheses
CJ Goodacre et al.
JOURNAL OF PROSTHETIC DENTISTRY (2003)
Persistent acute inflammation at the implant-abutment interface
N Broggini et al.
JOURNAL OF DENTAL RESEARCH (2003)
Finite element analysis to determine implant preload
LA Lang et al.
JOURNAL OF PROSTHETIC DENTISTRY (2003)
The effect of repeated torque and salivary contamination on the preload of slotted gold implant prosthetic screws
GK Tzenakis et al.
JOURNAL OF PROSTHETIC DENTISTRY (2002)
Stress levels for well-fitting implant superstructures as a function of tightening force levels, tightening sequence, and different operators
J Nissan et al.
JOURNAL OF PROSTHETIC DENTISTRY (2001)
Implant abutment screw rotations and preloads for four different screw materials and surfaces
WC Martin et al.
JOURNAL OF PROSTHETIC DENTISTRY (2001)
Examination of the implant-abutment interface after fatigue testing
RM Cibirka et al.
JOURNAL OF PROSTHETIC DENTISTRY (2001)
Effect of an antirotation resistance form on screw loosening for single implant-supported crowns
H Aboyoussef et al.
JOURNAL OF PROSTHETIC DENTISTRY (2000)