Related references
Note: Only part of the references are listed.Wear studies on carbon fiber nano SiC composites - a Grey-Taguchi method optimization
A. Arun Premnath
PARTICULATE SCIENCE AND TECHNOLOGY (2020)
Evaluation of drilling performances of nanocomposites reinforced with graphene and graphene oxide
Yahya Hisman Celik et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Processing of polyethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites
Karanbir Singh et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Improving the machining performance characteristics of the mu EDM drilling process by the online cryogenic cooling approach
R. Manivannan et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Experimental thrust forces and delamination analysis of GFRP laminates using candlestick drills
Liping Liu et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs
N. Feito et al.
COMPOSITE STRUCTURES (2018)
Effects of drilling area temperature on drilling of carbon fiber reinforced polymer composites due to temperature-dependent properties
Hongxiao Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Influence of drilling process parameters on hybrid vinyl ester composite
G. Anand et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Investigations on drilling of hemp/glass hybrid composites
Kundan Patel et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
A novel approach to predict the delamination factor for dry and cryogenic drilling of CFRP
Siddharth Joshi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Experimental Investigation on Delamination in Nanocomposite Drilling
N. Zarif Karimi et al.
FME TRANSACTIONS (2018)
Tool materials influence on surface roughness and oversize in machining glass fiber reinforced polypropylene (GFR-PP) composites
M. Mudhukrishnan et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Optimization of delamination factor in drilling GFR-polypropylene composites
T. Srinivasan et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
The effects of cutting parameters and tool geometry on cutting forces and tool wear in milling high-density fiberboard with ceramic cutting tools
Zhaolong Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Drilling analysis of thin woven glass-fiber reinforced epoxy composites
U. A. Khashaba et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Mechanical micro-drilling of nimonic 80A superalloy using uncoated and TiAlN-coated micro-drills
Niharika Swain et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material
T. Xia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Study of the Effect of Matrix, Fibre Treatment and Graphene on Delamination by Drilling Jute/Epoxy Nanohybrid Composite
V. Sridharan et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2016)
Study of the Effect of Tool Wear on Hole Quality in Drilling CFRP to Select a Suitable Drill for Multi-Criteria Hole Quality
D. Samuel Raj et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Delamination and Surface Roughness Analyses in Drilling Hybrid Carbon/Glass Composite
C. L. Tan et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Enhancement of Flexural and Shear Properties of Carbon Fiber/Epoxy Hybrid Nanocomposites by Boron Nitride Nano Particles and Carbon Nano Tube Modification
Hasan Ulus et al.
FIBERS AND POLYMERS (2015)
Drilling delamination and thermal damage of carbon nanotube/carbon fiber reinforced epoxy composites processed by microwave curing
Nanya Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
An approach towards damage free machining of CFRP and GFRP composite material: a review
Dhiraj Kumar et al.
ADVANCED COMPOSITE MATERIALS (2015)
Optimization of process parameters in drilling of epoxy Si3N4 composite material
B. M. Umesh Gowda et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Comparative analysis of PCD drill designs during drilling of CFRP laminates
Y. Karpat et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Boron nitride-MWCNT/epoxy hybrid nanocomposites: Preparation and mechanical properties
Hasan Ulus et al.
APPLIED SURFACE SCIENCE (2014)
A mechanistic approach to investigate drilling of UD-CFRP laminates with PCD drills
Y. Karpat et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
Multiscale fiber-reinforced thermoplastic composites incorporating carbon nanotubes: A review
Ana M. Diez-Pascual et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites
Yosra Turki et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Potential and prospective implementation of carbon nanotubes on next generation aircraft and space vehicles: A review of current and expected applications in aerospace sciences
Omid Gohardani et al.
PROGRESS IN AEROSPACE SCIENCES (2014)
Thermal conductivity of polymer composites with oriented boron nitride
Hong Jun Ahn et al.
THERMOCHIMICA ACTA (2014)
A review of modeling and control during drilling of fiber reinforced plastic composites
Amrinder Pal Singh et al.
COMPOSITES PART B-ENGINEERING (2013)
A study on monitoring the drilling of polymeric nanocomposite laminates using acoustic emission
I. Paul Theophilus Rajakumar et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
Drilling of polymer matrix composites: A review
U. A. Khashaba
JOURNAL OF COMPOSITE MATERIALS (2013)
Machinability Study of Hybrid Nanoclay-Glass Fibre Reinforced Polyester Composites
P. Prabhu et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2013)
Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich
Redouane Zitoune et al.
COMPOSITES PART B-ENGINEERING (2012)
Modeling of machining of composite materials: A review
Chinmaya R. Dandekar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Drilling thick fabric woven CFRP laminates with double point angle drills
Yigit Karpat et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Modelling of the thrust force of the drilling operation on PA6-nanoclay nanocomposites using particle swarm optimization
M. R. Soleymani Yazdi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Modeling and Analysis of Delamination Factor and Surface Roughness in Drilling GFRP Composites
K. Palanikumar
MATERIALS AND MANUFACTURING PROCESSES (2010)
Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates
Ali Faraz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Modified Exit-ply Delamination Model for Drilling FRPs
S. Gururaja et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Synthetic Routes and Formation Mechanisms of Spherical Boron Nitride Nanoparticles
Chengchun Tang et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor
J. Campos Rubio et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Delamination in high speed drilling of carbon fiber reinforced plastic (CFRP)
Juan C. Campos Rubio et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites
V. N. Gaitonde et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite
A. M. Abrao et al.
MATERIALS & DESIGN (2008)
Evaluation of Delamination in Drilling GFRP Composites
K. Palanikumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Thrust force and delamination of core-saw drill during drilling of carbon fiber reinforced plastics (CFRP)
C. C. Tsao
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling
K. Palanikumar
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates
J. Paulo Davim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Drilling of fiber reinforced plastics: A review
A. M. Abrao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Modeling and optimization of process parameters for defect toleranced drilling of GFRP composites
S. Arul et al.
MATERIALS AND MANUFACTURING PROCESSES (2006)
Delamination in drilling GFR-thermoset composites
UA Khashaba
COMPOSITE STRUCTURES (2004)
Taguchi analysis of delamination associated with various drill bits in drilling of composite material
CC Tsao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up:: influence of matrix (Viapal VUP 9731 and ATLAC 382-05)
JP Davim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Comprehensive analysis of delamination in drilling of composite materials with various drill bits
H Hocheng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments
JP Davim et al.
COMPOSITE STRUCTURES (2003)
Share Paper
