Related references
Note: Only part of the references are listed.RSM based optimization of performance and emission characteristics of DI compression ignition engine fuelled with diesel/aegle marmelos oil/diethyl ether blends at varying compression ratio, injection pressure and injection timing
M. Krishnamoorthi et al.
FUEL (2018)
Tailoring of Functionally Graded Mullite: La2O3 Coatings by Transferred Arc Plasma for Thermal Barrier Coatings
B. Shreeram et al.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2018)
The influence of charge air temperature and exhaust gas recirculation on the availability analysis, performance and emission behavior of diesel - bael oil - diethyl ether blend operated diesel engine
M. Krishnamoorthi et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Assessment on the consequences of injection timing and injection pressure on combustion characteristics of sustainable biodiesel fuelled engine
P. Mohamed Shameer et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Availability analysis, performance, combustion and emission behavior of bael oil - diesel - diethyl ether blends in a variable compression ratio diesel engine
M. Krishnamoorthi et al.
RENEWABLE ENERGY (2018)
Impact of partially stabilised zirconia on a single-cylinder diesel engine's performance, using orange oil methyl ester biodiesel
V Karthickeyan
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2018)
Corrosion, adhesion and erosion study of MZ and ML system using thermal plasma
B. Shreeram et al.
INTERNATIONAL JOURNAL OF HEAVY VEHICLE SYSTEMS (2018)
Thermal analysis of Nano ceramic coated piston used in natural gas engine
Zhimin Yao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
COMPARATIVE ANALYSIS OF STELLITE-6 COATED AND UNCOATED PISTON USING PONGAMIA BIODIESEL
J. Hemanandh et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Experimental investigation on performance, emission behavior and exergy analysis of a variable compression ratio engine fueled with diesel - aegle marmelos oil - diethyl ether blends
M. Krishnamoorthi et al.
ENERGY (2017)
Analysis of Exhaust Gas Recirculation (EGR) effects on exergy terms in an engine operating with diesel oil and hydrogen
Samad Jafarmadar et al.
ENERGY (2017)
Experimental evaluation on performance, combustion behavior and influence of in-cylinder temperature on NOx emission in a D.I diesel engine using thermal imager for various alternate fuel blends
P. Mohamed Shameer et al.
ENERGY (2017)
Combined Effect of Compression Ratio, Injection Pressure, and Injection Timing on Performance and Emission of a DI Compression Ignition Engine Fueled with Diesel-Aegle Marmelos Oil-Diethyl Ether Blends Using Response Surface Methodology
M. Krishnamoorthi et al.
ENERGY & FUELS (2017)
Effects of varying composition of biogas on performance and emission characteristics of compression ignition engine using exergy analysis
Saket Verma et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Influence of diethyl ether (DEE) addition in ethanol-biodiesel-diesel (EBD) and methanol-biodiesel-diesel (MBD) blends in a diesel engine
Harish Venu et al.
FUEL (2017)
Study on clean technology-assisted combustion behavior and NO x emission using thermal imager for alternate fuel blends
P. Mohamed Shameer et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2017)
Green technology and performance consequences of an eco-friendly substance on a 4-stroke diesel engine at standard injection timing and compression ratio
P. Mohamed Shameer et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Optical study on combustion characteristics of hydrotreated vegetable oil and blends under simulated CI engine conditions and various EGR
Vo Tan Chau et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Feasibility of a new non-edible feedstock in diesel engine: Investigation of performance, emission and combustion characteristics
Paramvir Singh et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Influence of antioxidants on fuel stability of Calophyllum inophyllum biodiesel and RSM-based optimization of engine characteristics at varying injection timing and compression ratio
P. Mohamed Shameer et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Optimal exergy-based control of internal combustion engines
M. Razmara et al.
APPLIED ENERGY (2016)
Optimization of diesel-butanol-vegetable oil blend ratios based on engine operating parameters
Alpaslan Atmanli et al.
ENERGY (2016)
Exergy analysis of biodiesel combustion in a direct injection compression ignition (CI) engine using quasi-dimensional multi-zone model
Peyman Nemati et al.
ENERGY (2016)
Butanol or DEE blends with either straight vegetable oil or biodiesel excluding fossil fuel: Comparative effects on diesel engine combustion attributes, cyclic variability and regulated emissions trade-off
Dimitrios C. Rakopoulos et al.
ENERGY (2016)
Straight and waste vegetable oil in engines: Review and experimental measurement of emissions, fuel consumption and injector fouling on a turbocharged commercial engine
Bruno D'Alessandro et al.
FUEL (2016)
Effects of EGR rate and hydrogen/carbon monoxide ratio on combustion and emission characteristics of biogas/diesel dual fuel combustion engine
Xinxing Shan et al.
FUEL (2016)
Experimental verification of optimized NOX reduction strategies in a decrepit Euro-3 diesel engine retrofitted with a cooled EGR system
Hoon Lee et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Improvement of biodiesel methanol blends performance in a variable compression ratio engine using response surface methodology
Y. Datta Bharadwaz et al.
ALEXANDRIA ENGINEERING JOURNAL (2016)
Ignition and combustion behaviour of vegetable oils after injection in a constant volume combustion chamber
Peter Emberger et al.
BIOMASS & BIOENERGY (2015)
Experimental investigation of the effect of compression ratio, injection timing & pressure in a DI (direct injection) diesel engine running on carbon black-water-diesel emulsion
Arun Kumar Wamankar et al.
ENERGY (2015)
Response surface methodology based optimization of diesel-n-butanol -cotton oil ternary blend ratios to improve engine performance and exhaust emission characteristics
Alpaslan Atmanli et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
The influence of straight vegetable oil fatty acid composition on compression ignition combustion and emissions
Paul Hellier et al.
FUEL (2015)
The impact of intake air temperature on performance and exhaust emissions of a diesel methanol dual fuel engine
Wang Pan et al.
FUEL (2015)
Spray characteristics of diesel and derivatives in direct injection diesel engines with varying injection pressures
Raghu Palani et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Experimental investigation of combustion, performance and emission characteristics of a modified piston
Isaac JoshuaRamesh J. Lalvani et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Effects of injection timing on bio-diesel fuelled engine characteristics-An overview
N. Panneerselvam et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Vegetable oils as fuels in Diesel engine. Engine performance and emissions
A. Corsini et al.
69TH CONFERENCE OF THE ITALIAN THERMAL ENGINEERING ASSOCIATION, ATI 2014 (2015)
Impact of nozzle holes configuration on fuel spray, wall impingement and NOx emission of a diesel engine for biodiesel-diesel blend (B20)
Subhash Lahane et al.
APPLIED THERMAL ENGINEERING (2014)
Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl ether
Dimitrios C. Rakopoulos et al.
ENERGY (2014)
Experimental investigation of engine performance and exhaust emissions of a diesel engine fueled with diesel-n-butanol-vegetable oil blends
Alpaslan Atmanli et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Availability analysis of n-heptane/iso-octane blends during low-temperature engine combustion using a single-zone combustion model
Hongqing Feng et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Experimental investigation of the effect of compression ratio on performance and emissions of CI engine operated with waste fried oil methyl ester blend
Jagannath Hirkude et al.
FUEL PROCESSING TECHNOLOGY (2014)
Optimization of operational parameters on performance and emissions of a diesel engine using biodiesel
K. Sivaramakrishnan et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2014)
Preparation and characterisation of three-layered environmental barrier coatings onto silicon carbide substrate
Z. Yan et al.
MATERIALS RESEARCH INNOVATIONS (2014)
Multi-objective optimization of combustion, performance and emission parameters in a jatropha biodiesel engine using non-dominated sorting genetic algorithm-II
Sunil Dhingra et al.
FRONTIERS OF MECHANICAL ENGINEERING (2014)
Investigations on the effect of Waste fried oil methyl ester blends and load on performance and smoke opacity of diesel engine using response surface methodology
Jagannath Hirkude et al.
4 INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY RESEARCH (ICAER 2013) (2014)
State of the art of NOx mitigation technologies and their effect on the performance and emission characteristics of biodiesel-fueled Compression Ignition engines
S. M. Palash et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Study of air inlet preheating and EGR impacts for improving the operation of compression ignition engine running under dual fuel mode
R. G. Papagiannakis
ENERGY CONVERSION AND MANAGEMENT (2013)
Combined effect of injection timing, EGR and injection pressure in NOx control of a stationary diesel engine fuelled with crude rice bran oil methyl ester
S. Saravanan et al.
FUEL (2013)
Studying combustion and cyclic irregularity of diethyl ether as supplement fuel in diesel engine
D. C. Rakopoulos et al.
FUEL (2013)
Optimization and kinetic studies on biodiesel production from underutilized Ceiba Pentandra oil
Pandian Sivakumar et al.
FUEL (2013)
Performance and combustion characteristics of a diesel engine with titanium oxide coated piston using Pongamia methyl ester
M. Prabhahar et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)
Preparation, characterization, engine combustion and emission characteristics of rapeseed oil based hybrid fuels
D. H. Qi et al.
RENEWABLE ENERGY (2013)
Experimental investigation of kapok (Ceiba pentandra) oil biodiesel as an alternate fuel for diesel engine
S. Vedharaj et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
A comparative analysis of different methods to improve the performance of cotton seed oil fuelled diesel engine
M. Leenus Jesu Martin et al.
FUEL (2012)
Thermo-mechanical properties of mullite/zirconia reinforced alumina ceramic composites
M. M. S. Wahsh et al.
MATERIALS & DESIGN (2012)
Impact of alternative fuel properties on fuel spray behavior and atomization
Rajesh Kumar Pandey et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel-diesel blend using response surface methodology
M. Pandian et al.
APPLIED ENERGY (2011)
Performance, emission and combustion characteristics of a variable compression ratio engine using methyl esters of waste cooking oil and diesel blends
K. Muralidharan et al.
APPLIED ENERGY (2011)
Availability analysis of n-heptane and natural gas blends combustion in HCCI engines
A. K. Amjad et al.
ENERGY (2011)
Second law analysis of hydrogen-air combustion in a spark ignition engine
Saleel Ismail et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Thermo mechanical analysis of a partially ceramic coated piston used in an SI engine
Muhammet Cerit
SURFACE & COATINGS TECHNOLOGY (2011)
Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl ester
S. Jindal et al.
APPLIED THERMAL ENGINEERING (2010)
Influence of critical plasma spraying parameter (CPSP) on plasma sprayed Alumina-Titania composite coatings
S. Yugeswaran et al.
CERAMICS INTERNATIONAL (2010)
The influence of the inlet charge temperature on the second law balance under the various operating engine speeds in DI Diesel engine
A. Abassi et al.
FUEL (2010)
Use of crude filtered vegetable oil as a fuel in diesel engines state of the art: Literature review
S. S. Sidibe et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Thermal analysis of functionally graded coating AlSi alloy and steel pistons
Ekrem Buyukkaya
SURFACE & COATINGS TECHNOLOGY (2008)
Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method
Ekrem Buyukkaya et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Thermal analysis of an SI engine piston using different combustion boundary condition treatments
V Esfahanian et al.
APPLIED THERMAL ENGINEERING (2006)
A finite element analysis technique for predicting as-sprayed residual stresses generated by the plasma spray coating process
HW Ng et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2005)
The effect of thermal barrier coatings on diesel engine performance
T Hejwowski et al.
VACUUM (2002)
Materials science - Thermal barrier coatings for gas-turbine engine applications
NP Padture et al.
SCIENCE (2002)
Development of light composite materials with low coefficients of thermal expansion
ME Smagorinski et al.
MATERIALS SCIENCE AND TECHNOLOGY (2000)
Thermomechanical fatigue characterization of zirconia (8%Y2O3-ZrO2) and mullite thermal barrier coatings on diesel engine components: effect of coatings on engine performance
P Ramaswamy et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2000)