Related references
Note: Only part of the references are listed.Influence of polyurethane dispersion as surface treatment on mechanical, thermal and dynamic mechanical properties of laminated woven carbon-fiber-reinforced polyamide 6 composites
Defang Zhao et al.
COMPOSITES PART B-ENGINEERING (2019)
Relation between Tensile Strength and Modulus of Rupture for GFRP Reinforcing Bars
Paulina Arczewska et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
Size Effects of High Strength Steel Wires
Kanji Ono
METALS (2019)
Sample Sizes Based on Weibull Distribution and Normal Distribution for FRP Tensile Coupon Test
Yongxin Yang et al.
MATERIALS (2019)
Failure Prediction of CFRP Composites Using Weibull Analysis
A. Vishnu Vardhan et al.
ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS (2019)
Stress analysis and fracture toughness of notched polyacrylonitrile (PAN)-based and pitch-based single carbon fibers
Kimiyoshi Naito
CARBON (2018)
Reliability analysis of tensile strengths using Weibull distribution in glass/epoxy and carbon/epoxy composites
K. Naresh et al.
COMPOSITES PART B-ENGINEERING (2018)
Effect of titania content and biomimetic coating on the mechanical properties of the Y-TZP/TiO2 composite
Ranulfo Benedito de Paula Miranda et al.
DENTAL MATERIALS (2018)
Effects of Electrode Composition and Thickness on the Mechanical Performance of a Solid Oxide Fuel Cell
Xiurong Fang et al.
ENERGIES (2018)
Statistical Analysis of Stress Signals from Bridge Monitoring by FBG System
Xiao-Wei Ye et al.
SENSORS (2018)
Weibull analysis of effect of T6 heat treatment on fracture strength of AM60B magnesium alloy
A. H. Shevidi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Review on Structural Health Evaluation with Acoustic Emission
Kanji Ono
APPLIED SCIENCES-BASEL (2018)
About Fluence and Process Parameters on Maraging Steel Processed by Selective Laser Melting: Do They Convey the Same Information?
Stefania Cacace et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)
Dynamic Brazilian Test for Mechanical Characterization of Ceramic Ballistic Protection
Martina Scapin et al.
SHOCK AND VIBRATION (2017)
A Software Reliability Model with a Weibull Fault Detection Rate Function Subject to Operating Environments
Kwang Yoon Song et al.
APPLIED SCIENCES-BASEL (2017)
Determination of the Weibull parameters from the mean value and the coefficient of variation of the measured strength for brittle ceramics
Bin Deng et al.
JOURNAL OF ADVANCED CERAMICS (2017)
Variability of Mechanical Properties and Weight for Reinforcing Bar Produced in Saudi Arabia
F. Djavanroodi et al.
INTERNATIONAL CONFERENCE ON MATERIALS SCIENCES AND NANOMATERIALS (2017)
Statistical Analysis on the Mechanical Properties of Magnesium Alloys
Shengfeng Guo et al.
MATERIALS (2017)
What does NDE need to achieve for cast iron pipe networks?
Alexander Rainer et al.
INFRASTRUCTURE ASSET MANAGEMENT (2017)
Transverse compressive properties of polyacrylonitrile (PAN)-based and pitch-based single carbon fibers
Kimiyoshi Naito et al.
CARBON (2017)
Tensile properties of novel carbon/glass hybrid thermoplastic composite rods
Kimiyoshi Naito et al.
COMPOSITE STRUCTURES (2017)
A study on the failure behavior and mechanical properties of unidirectional fiber reinforced thermosetting and thermoplastic composites
Yan Ma et al.
COMPOSITES PART B-ENGINEERING (2016)
Reliability Analysis and Overload Capability Assessment of Oil-Immersed Power Transformers
Chen Wang et al.
ENERGIES (2016)
Analysis of Factors Influencing Measurement Accuracy of Al Alloy Tensile Test Results
Bojan Podgornik et al.
MEASUREMENT SCIENCE REVIEW (2016)
Two Independent Prospectively Planned Blinded Weibull Statistical Analyses of Flexural Strength Data of Zirconia Materials
Malgorzata Roos et al.
MATERIALS (2016)
Mechanical Characterization of the Tensile Properties of Glass Fiber and Its Reinforced Polymer (GFRP) Composite under Varying Strain Rates and Temperatures
Yunfu Ou et al.
POLYMERS (2016)
Weibull Analysis of H-451 Nuclear-Grade Graphite
Saumya Shah et al.
INTERNATIONAL CONFERENCE ON VIBRATION PROBLEMS 2015 (2016)
FRACTURE STATISTICS USING THREE-PARAMETER AND TWO-PARAMETER WEIBULL DISTRIBUTIONS FOR Fe-0.4C-1.5Cr-1.5Ni-0.8Mn-0.2Mo STRUCTURAL SINTERED STEEL
Ch. Fial et al.
ARCHIVES OF METALLURGY AND MATERIALS (2016)
Reliability Analysis of Fatigue Failure of Cast Components for Wind Turbines
Hesam Mirzaei Rafsanjani et al.
ENERGIES (2015)
Microstructure-Tensile Properties Correlation for the Ti-6Al-4V Titanium Alloy
Xiaohui Shi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Statistical analysis of the material properties of selected structural carbon steels
Adam J. Sadowski et al.
STRUCTURAL SAFETY (2015)
Processing and characterization of large diameter ceramic SiCN monofilaments from commercial oligosilazanes
O. Flores et al.
RSC ADVANCES (2015)
Coating of carbon nanotube fibers: variation of tensile properties, failure behavior, and adhesion strength
Edith Maeder et al.
FRONTIERS IN MATERIALS (2015)
Modified Weibull Distribution for Analyzing the Tensile Strength of Bamboo Fibers
Fang Wang et al.
POLYMERS (2014)
Evaluation of tensile strength and surface topography of orthodontic wires after infection control procedures: An in vitro study
M. Brindha et al.
JOURNAL OF PHARMACY AND BIOALLIED SCIENCES (2014)
Intergranular corrosion resistance of nanostructured austenitic stainless steel
A. T. Krawczynska et al.
JOURNAL OF MATERIALS SCIENCE (2013)
The effect of melt quality and filtering on the Weibull distributions of tensile properties in Al-7%Si-Mg alloy castings
G. B. Eisaabadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Mechanical behaviour of dual-phase high-strength steel under high strain rate tensile loading
Jingui Qin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
A modified Weibull model for tensile strength distribution of carbon nanotube fibers with strain rate and size effects
Gengzhi Sun et al.
APPLIED PHYSICS LETTERS (2012)
Tensile properties of high strength polyacrylonitrile (PAN)-based and high modulus pitch-based hybrid carbon fibers-reinforced epoxy matrix composite
Kimiyoshi Naito et al.
JOURNAL OF MATERIALS SCIENCE (2012)
The effect of surface modification with carbon nanotubes upon the tensile strength and Weibull modulus of carbon fibers
Kimiyoshi Naito et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Part I: Porosity dependence of the Weibull modulus for hydroxyapatite and other brittle materials
X. Fan et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
A practical and systematic review of Weibull statistics for reporting strengths of dental materials
Janet B. Quinn et al.
DENTAL MATERIALS (2010)
The effect of surface roughness on the Weibull distribution of porcelain strength
Yoshiharu Nakamura et al.
DENTAL MATERIALS JOURNAL (2010)
Is Weibull distribution the most appropriate statistical strength distribution for brittle materials?
Bikramjit Basu et al.
CERAMICS INTERNATIONAL (2009)
A Comprehensive Model for Determining Tensile Strengths of Various Unidirectional Composites
Jun Koyanagi et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Statistical evaluation of the lateral-torsional buckling resistance of steel I-beams, Part 2: Variability of steel properties
L. Simoes da Silva et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2009)
The influence of micropore size on the mechanical properties of bulk hydroxyapatite and hydroxyapatite scaffolds
Jacqueline M. Cordell et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2009)
Characteristic strength, Weibull modulus, and failure probability of fused silica glass
Claude A. Klein
OPTICAL ENGINEERING (2009)
Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers
Kimiyoshi Naito et al.
CARBON (2008)
Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3-and 4-point bending tests
Sinval A. Rodrigues et al.
DENTAL MATERIALS (2008)
Weibull-based methodology for condition assessment of cast iron water mains and its application
H. M. S. Belmonte et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2008)
Tensile strengths and Young's modulus of thin copper and copper-nickel (CuNi44) substrates
Oliver Staller et al.
CENTRAL EUROPEAN JOURNAL OF CHEMISTRY (2008)
Fractography and tensile strength of glass wool fibres
Majbritt D. Lund et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2008)
Quantitative fractographic analysis of variability in the tensile ductility of high-pressure die-cast AE44 Mg-alloy
S. G. Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Nanoscale Weibull statistics
NM Pugno et al.
JOURNAL OF APPLIED PHYSICS (2006)
On the tensile strength distribution of multiwalled carbon nanotubes
AH Barber et al.
APPLIED PHYSICS LETTERS (2005)
Evaluation of wrought iron for continued service in historic bridges
R Gordon et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2005)
Flexural strength of sapphire: Weibull statistical analysis of stressed area, surface coating, and polishing procedure effects
CA Klein
JOURNAL OF APPLIED PHYSICS (2004)
Weibull analysis and flexural strength of hot-pressed core veneered ceramic structures
A Della Bona et al.
DENTAL MATERIALS (2003)
Flexural strength of a plain-woven Tyranno-SA fiber-reinforced SiC matrix composite
W Yang et al.
MATERIALS TRANSACTIONS (2003)
Review of resistance factor for steel: data collection
BJ Schmidt et al.
CANADIAN JOURNAL OF CIVIL ENGINEERING (2002)
Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics
J Tinschert et al.
JOURNAL OF DENTISTRY (2000)
Share Paper
