Related references
Note: Only part of the references are listed.Inline quantification of extrudability of cementitious materials for digital construction
V. N. Nerella et al.
CEMENT & CONCRETE COMPOSITES (2019)
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
An approach to develop printable strain hardening cementitious composites
Stefan Chaves Figueiredo et al.
MATERIALS & DESIGN (2019)
Chemical deformation of metakaolin based geopolymer
Zhenming Li et al.
CEMENT AND CONCRETE RESEARCH (2019)
Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction
V. N. Nerella et al.
CEMENT AND CONCRETE RESEARCH (2019)
A critical review of preparation design and workability measurement of concrete material for largescale 3D printing
Guowei Ma et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2018)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
Delphine Marchon et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
The role of early age structural build-up in digital fabrication with concrete
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
Towards the formulation of robust and sustainable cementitious binders for 3-D additive construction by extrusion
Dale P. Bentz et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete
R. J. M. Wolfs et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Calcined clay limestone cements (LC3)
Karen Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2018)
Additive manufacturing of geopolymer for sustainable built environment
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Effect of replacement of silica fume with calcined clay on the hydration and microstructural development of eco-UHPFRC
Wei Huang et al.
MATERIALS & DESIGN (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays
Francois Avet et al.
CEMENT AND CONCRETE RESEARCH (2016)
A Review on the Durability of Alkali-Activated Fly Ash/Slag Systems: Advances, Issues, and Perspectives
Kamel Arbi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Substituting local data for overseas life cycle inventories - a case study of concrete products in Hong Kong
Ya Hong Dong et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion
Xiangming Zhou et al.
CEMENT & CONCRETE COMPOSITES (2013)
Cement substitution by a combination of metakaolin and limestone
M. Antoni et al.
CEMENT AND CONCRETE RESEARCH (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate
Arnoud Perrot et al.
RHEOLOGICA ACTA (2012)
Supplementary cementitious materials
Barbara Lothenbach et al.
CEMENT AND CONCRETE RESEARCH (2011)
The greening of the concrete industry
C. Meyer
CEMENT & CONCRETE COMPOSITES (2009)
The role of calcium carbonate in cement hydration
T. Matschei et al.
CEMENT AND CONCRETE RESEARCH (2007)
Green and early age compressive strength of extruded cement mortar monitored with compression tests and ultrasonic techniques
Thomas Voigt et al.
CEMENT AND CONCRETE RESEARCH (2006)