Related references
Note: Only part of the references are listed.Wire and arc additive manufacturing of HSLA steel: Effect of thermal cycles on microstructure and mechanical properties
Tiago A. Rodrigues et al.
ADDITIVE MANUFACTURING (2019)
Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography
A. Kwiatkowski da Silva et al.
ACTA MATERIALIA (2018)
On the improvement of measurement accuracy of retained austenite in steel with X-ray diffraction
M. Witte et al.
MATERIALS CHARACTERIZATION (2018)
The relationships of microstructure-mechanical properties in quenching and partitioning (Q&P) steel accompanied with microalloyed carbide precipitation
Fei Peng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Magnetic measurement of retained austenite in sintered steels - benefits and limitations
Kevin Ouda et al.
POWDER METALLURGY (2018)
Characterization of bainitic/martensitic structures formed in isothermal treatments below the Ms temperature
A. Navarro-Lopez et al.
MATERIALS CHARACTERIZATION (2017)
Effect of small addition of Cr on stability of retained austenite in high carbon steel
Rumana Hossain et al.
MATERIALS CHARACTERIZATION (2017)
Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering
J. Hidalgo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q & P) processes after a full and intercritical austenitization
Shu Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
On the relationship between the multiphase microstructure and the mechanical properties of a 0.2C quenched and partitioned steel
Pierre Huyghe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Study of MA Effect on Yield Strength and Ductility of X80 Linepipe Steels Weld
Nazmul Huda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Austenite reversion kinetics and stability during tempering of a Ti stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry
J. D. Escobar et al.
ACTA MATERIALIA (2017)
Study of retained austenite and nano-scale precipitation and their effects on properties of a low alloyed multi-phase steel by the two-step intercritical treatment
Z. J. Xie et al.
MATERIALS CHARACTERIZATION (2016)
Quantification of retained austenite by X-ray diffraction and saturation magnetization in a supermartensitic stainless steel
Felipe Lucas Sicupira et al.
MATERIALS CHARACTERIZATION (2016)
Structure-property relation in a quenched-partitioned low alloy steel involving bainite transformation
Haoran Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Correlation between mechanical properties and retained austenite characteristics in a low-carbon medium manganese alloyed steel plate
Jun Chen et al.
MATERIALS CHARACTERIZATION (2015)
Enhanced ductility and toughness in an ultrahigh-strength Mn-Si-Cr-C steel: The great potential of ultrafine filmy retained austenite
Guhui Gao et al.
ACTA MATERIALIA (2014)
EBSD and reconstruction of pre-transformation microstructures, examples and complexities in steels
Majid Abbasi et al.
MATERIALS CHARACTERIZATION (2014)
Effect of partitioning procedure on microstructure and mechanical properties of a hot-rolled directly quenched and partitioned steel
Xiaodong Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Austenite stability for quenching and partitioning treated steel revealed by colour tint-etching method
H. S. Zhao et al.
MATERIALS SCIENCE AND TECHNOLOGY (2014)
Retained austenite thermal stability in a nanostructured bainitic steel
Behzad Avishan et al.
MATERIALS CHARACTERIZATION (2013)
The effect of boron on microstructure and mechanical properties of high-strength cast FeCrVC
J. Hufenbach et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel
E. Paravicini Bagliani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Thermal Stability of Austenite and Properties of Quenching & Partitioning (Q&P) Treated AHSS
R. M. Wu et al.
INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS) (2013)
Retained Austenite Decomposition and Carbide Formation During Tempering a Hot-Work Tool Steel X38CrMoV5-1 Studied by Dilatometry and Atom Probe Tomography
Christoph Lerchbacher et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Characterization of transformed and deformed microstructures in transformation induced plasticity steels using electron backscattering diffraction
Eui Pyo Kwon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis
S. Primig et al.
THERMOCHIMICA ACTA (2011)
Microstructure and Mechanical Properties of 50SiMnNiNb Steel by a Novel Quenching-Partitioning-Austempering Heat Treatment
Li Hongyan et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2009)
Magnetic properties and retained austenite quantification in SAE 4340 steel
C. Ajus et al.
MATERIA-RIO DE JANEIRO (2009)
On measurement of retained austenite in multiphase TRIP steels - results of blind round robin test involving six different techniques
P. J. Jacques et al.
MATERIALS SCIENCE AND TECHNOLOGY (2009)
Thermal stability of retained Austenite in TRIP steel after different treatments
Shi Wen et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2008)
Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel
M. J. Santofimia et al.
MATERIALS CHARACTERIZATION (2008)
Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique
Roumen Petrov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Effect of intercritical annealing on retained austenite characterization in textured TRIP-assisted steel sheet
E. Emadoddin et al.
MATERIALS CHARACTERIZATION (2006)
Magnetic nondestructive inspection of retained austenite in cast iron
Y. Gotoh et al.
IEEE TRANSACTIONS ON MAGNETICS (2006)
X-ray diffraction and magnetic characterization of the retained austenite in a chromium alloyed high carbon steel
S. S. M. Tavares et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Dilatometric study of reaustenitisation of high silicon bainitic steels:: Decomposition of retained austenite
FG Caballero et al.
MATERIALS TRANSACTIONS (2005)
Magnetic measurements of the reverse martensite to austenite transformation in a rolled austenitic stainless steel
K Mumtaz et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Development of hard bainite
C Garcia-Mateo et al.
ISIJ INTERNATIONAL (2003)
Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels
L Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Mossbauer study of the retained austenitic phase in multiphase steels
A Mijovilovich et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)