Related references
Note: Only part of the references are listed.Patient-Specific Total Knees Demonstrate a Higher Manipulation Rate Compared to Off-the-Shelf Implants
Peter B. White et al.
JOURNAL OF ARTHROPLASTY (2016)
Customizable engineered blood vessels using 3D printed inserts
Cameron B. Pinnock et al.
METHODS (2016)
Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering
Jin Woo Lee et al.
BIOFABRICATION (2016)
From bench to FDA to bedside: US regulatory trends for new stem cell therapies
Paul S. Knoepfler
ADVANCED DRUG DELIVERY REVIEWS (2015)
3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications
Kajsa Markstedt et al.
BIOMACROMOLECULES (2015)
Application of 3D printed customized external fixator in fracture reduction
Feng Qiao et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2015)
Systematic Review of Patient-specific Instrumentation in Total Knee Arthroplasty: New but Not Improved
Adam Sassoon et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2015)
Three-dimensional printed calcaneal prosthesis following total calcanectomy
Jungo Imanishi et al.
INTERNATIONAL JOURNAL OF SURGERY CASE REPORTS (2015)
Cell and protein compatible 3D bioprinting of mechanically strong constructs for bone repair
M. J. Sawkins et al.
BIOFABRICATION (2015)
3D bioprinting of cartilage for orthopedic surgeons: reading between the lines
Claudia Di Bella et al.
FRONTIERS IN SURGERY (2015)
Minimally invasive plate osteosynthesis using 3D Printing for shaft fractures of clavicles: technical note
Ho-Seung Jeong et al.
ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY (2014)
Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells
Guifang Gao et al.
BIOTECHNOLOGY JOURNAL (2014)
Mesenchymal Stem Cells in Regenerative Medicine for Musculoskeletal Diseases: Bench, Bedside, and Industry
Chih-Chang Wei et al.
CELL TRANSPLANTATION (2014)
Patient-specific Guides Do Not Improve Accuracy in Total Knee Arthroplasty: A Prospective Randomized Controlled Trial
Jan Victor et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2014)
Preshaping Plates for Minimally Invasive Fixation of Calcaneal Fractures Using a Real-Size 3D-Printed Model as a Preoperative and Intraoperative Tool
Kook Jin Chung et al.
FOOT & ANKLE INTERNATIONAL (2014)
Three-dimensional corrective osteotomy using a patient-specific osteotomy guide and bone plate based on a computer simulation system: accuracy analysis in a cadaver study
Shinsuke Omori et al.
INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2014)
The Shape of Things to Come 3D Printing in Medicine
Mark H. Michalski et al.
JAMA-JOURNAL OF THE AMERICAN MEDICAL ASSOCIATION (2014)
Application of 3-Dimensional Printing in Hand Surgery for Production of a Novel Bone Reduction Clamp
Sam M. Fuller et al.
JOURNAL OF HAND SURGERY-AMERICAN VOLUME (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Tactile Surgical Navigation System for Complex Acetabular Fracture Surgery
Takahiro Niikura et al.
ORTHOPEDICS (2014)
Application of 3-D printing (rapid prototyping) for creating physical models of pediatric orthopedic disorders
Zbigniew A. Starosolski et al.
PEDIATRIC RADIOLOGY (2014)
Hope versus hype: what can additive manufacturing realistically offer trauma and orthopedic surgery?
David M. R. Gibbs et al.
REGENERATIVE MEDICINE (2014)
Protein-releasing polymeric scaffolds induce fibrochondrocytic differentiation of endogenous cells for knee meniscus regeneration in sheep
Chang H. Lee et al.
SCIENCE TRANSLATIONAL MEDICINE (2014)
How might 3D printing affect clinical practice?
Mahiben Maruthappu et al.
BMJ-BRITISH MEDICAL JOURNAL (2014)
Cartilage Repair and Subchondral Bone Migration Using 3D Printing Osteochondral Composites: A One-Year-Period Study in Rabbit Trochlea
Weijie Zhang et al.
BIOMED RESEARCH INTERNATIONAL (2014)
Diagnostic Accuracy of Two-Dimensional and Three-Dimensional Imaging and Modeling of Radial Head Fractures
Thierry G. Guitton et al.
JOURNAL OF HAND AND MICROSURGERY (2014)
Surgical Technique: Computer-generated Custom Jigs Improve Accuracy of Wide Resection of Bone Tumors
Fazel A. Khan et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2013)
Preoperative, Computer Simulation-Based, Three-Dimensional Corrective Osteotomy for Cubitus Varus Deformity with Use of a Custom-Designed Surgical Device
Yukari Takeyasu et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2013)
Accuracy of medical models made by additive manufacturing (rapid manufacturing)
Mika Salmi et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2013)
Bioprinting for stem cell research
Savas Tasoglu et al.
TRENDS IN BIOTECHNOLOGY (2013)
Virtual 3D planning and patient specific surgical guides for osteotomies around the knee A FEASIBILITY AND PROOF-OF-CONCEPT STUDY
J. Victor et al.
BONE & JOINT JOURNAL (2013)
Accuracy of 3D Virtual Planning of Corrective Osteotomies of the Distal Radius
Filip Stockmans et al.
JOURNAL OF WRIST SURGERY (2013)
Precise Control of Osteogenesis for Craniofacial Defect Repair The Role of Direct Osteoprogenitor Contact in BMP-2-Based Bioprinting
Darren M. Smith et al.
ANNALS OF PLASTIC SURGERY (2012)
Computer-Assisted Corrective Osteotomy for Malunited Diaphyseal Forearm Fractures
Junichi Miyake et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
Additive manufacturing for microvascular reconstruction of the mandible in 20 patients
Bernd Lethaus et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2012)
Three-Dimensional Printing of Bone Repair and Replacement Materials: Impact on Craniofacial Surgery
John L. Ricci et al.
JOURNAL OF CRANIOFACIAL SURGERY (2012)
Corrective osteotomy for malunited both bones fractures of the forearm with radial head dislocations using a custom-made surgical guide: two case reports
Kunihiro Oka et al.
JOURNAL OF SHOULDER AND ELBOW SURGERY (2012)
Computer-assisted mosaic arthroplasty using patient-specific instrument guides
Manuela Kunz et al.
KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY (2012)
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Jordan S. Miller et al.
NATURE MATERIALS (2012)
Printing and Prototyping of Tissues and Scaffolds
Brian Derby
SCIENCE (2012)
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Xiaofeng Cui et al.
TISSUE ENGINEERING PART A (2012)
Biofabrication of Osteochondral Tissue Equivalents by Printing Topologically Defined, Cell-Laden Hydrogel Scaffolds
Natalja E. Fedorovich et al.
TISSUE ENGINEERING PART C-METHODS (2012)
Patient-Specific Instrumentation in Total Knee Arthroplasty: A Review
Denis Nam et al.
JOURNAL OF KNEE SURGERY (2012)
Application of computer-aided design osteotomy template for treatment of cubitus varus deformity in teenagers: A pilot study
Yuan Z. Zhang et al.
JOURNAL OF SHOULDER AND ELBOW SURGERY (2011)
Computer-assisted and patient-specific 3-D planning and evaluation of a single-cut rotational osteotomy for complex long-bone deformities
J. G. G. Dobbe et al.
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2011)
Organ printing: the future of bone regeneration?
Natalja E. Fedorovich et al.
TRENDS IN BIOTECHNOLOGY (2011)
Computer-assisted versus non-computer-assisted preoperative planning of corrective osteotomy for extra-articular distal radius malunions: a randomized controlled trial
Natalie L. Leong et al.
BMC MUSCULOSKELETAL DISORDERS (2010)
A custom-made guide-wire positioning device for Hip Surface Replacement Arthroplasty: description and first results
Martijn Raaijmaakers et al.
BMC MUSCULOSKELETAL DISORDERS (2010)
3D printing based on imaging data: review of medical applications
F. Rengier et al.
INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2010)
Three-Dimensional Corrective Osteotomy of Malunited Fractures of the Upper Extremity with Use of a Computer Simulation System
Tsuyoshi Murase et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2008)
Rapid Prototyping Technology for Surgeries of the Pediatric Spine and Pelvis Benefits Analysis
Joe Guarino et al.
JOURNAL OF PEDIATRIC ORTHOPAEDICS (2007)
Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures
C. Hurson et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2007)
Custom-designed orthopedic implants evaluated using finite element analysis of patient-specific computed tomography data: femoral-component case study
Ola La Harrysson et al.
BMC MUSCULOSKELETAL DISORDERS (2007)
Rapid prototyping: The future of trauma surgery?
GA Brown et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2003)
Computer assisted screw insertion into real 3D rapid prototyping pelvis models
P Peters et al.
CLINICAL BIOMECHANICS (2002)
Three-dimensional computed tomography-based, personalized drill guide for posterior cervical stabilization at C1-C2
J Goffin et al.
SPINE (2001)
Share Paper
