Related references
Note: Only part of the references are listed.Characterization of hard-segment crystalline phase of thermoplastic polyurethane in the presence of butane and glycerol monosterate and its impact on mechanical property and microcellular morphology
N. Hossieny et al.
POLYMER (2017)
Biocompatible, degradable thermoplastic polyurethane based on polycaprolactone-block-polytetrahydrofuran-block-polycaprolactone copolymers for soft tissue engineering
Hao-Yang Mi et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing
Hu Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Effect of Pattern Shape on the Initial Deposition of Particles in the Aqueous Phase on Patterned Membranes during Crossflow Filtration
Dong-Chan Choi et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS (2017)
Steam-chest molding of expanded thermoplastic polyurethane bead foams and their mechanical properties
Chengbiao Ge et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Ultra-tough and super thermal-insulation nanocellular PMMA/TPU
Guilong Wang et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Anti-deformed Polyacrylonitrile/Polysulfone Composite Membrane with Binary Structures for Effective Air Filtration
Shichao Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Development of PLA/cellulosic fiber composite foams using injection molding: Crystallization and foaming behaviors
WeiDan Ding et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
CO2-blown microcellular non-isocyanate polyurethane (NIPU) foams: from bio- and CO2-sourced monomers to potentially thermal insulating materials
B. Grignard et al.
GREEN CHEMISTRY (2016)
Poly(lactic acid)-Based in Situ Microfibrillar Composites with Enhanced Crystallization Kinetics, Mechanical Properties, Rheological Behavior, and Foaming Ability
Adel Ramezani Kakroodi et al.
BIOMACROMOLECULES (2015)
Heat transfer in microcellular polystyrene/multi-walled carbon nanotube nanocomposite foams
Pengjian Gong et al.
CARBON (2015)
Breath Figure: A Nature-Inspired Preparation Method for Ordered Porous Films
Aijuan Zhang et al.
CHEMICAL REVIEWS (2015)
Microcellular to nanocellular polymer foams: Progress (2004-2015) and future directions - A review
Chimezie Okolieocha et al.
EUROPEAN POLYMER JOURNAL (2015)
Cellular structure and mechanical properties of starch-based foamed blocks reinforced with natural fibers and produced by microwave heating
A. Lopez-Gil et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
Three-dimensional hydraulic modeling of particle deposition on the patterned isopore membrane in crossflow microfiltration
Dong-Chan Choi et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
Past and present developments in polymer bead foams and bead foaming technology
Daniel Raps et al.
POLYMER (2015)
Polymer nano-foams for insulating applications prepared from CO2 foaming
C. Forest et al.
PROGRESS IN POLYMER SCIENCE (2015)
Fabrication of Transferable Perforated Isoporous Membranes on Versatile Solid Substrates via the Breath Figure Method
Lian-Wei Wu et al.
ADVANCED MATERIALS INTERFACES (2015)
Characterization of the Structure, Acoustic Property, Thermal Conductivity, and Mechanical Property of Highly Expanded Open-Cell Polycarbonate Foams
Davoud Jahani et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Preparation of large micron-sized monodisperse polystyrene/silver core-shell microspheres with compact shell structure and their electrical conductive and catalytic properties
Yougen Hu et al.
RSC ADVANCES (2015)
Superhydrophobic and Oleophilic Open-Cell Foams from Fibrillar Blends of Polypropylene and Polytetrafluoroethylene
Ali Rizvi et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Fabrication of Perforated Isoporous Membranes via a Transfer-Free Strategy: Enabling High-Resolution Separation of Cells
Yang Ou et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Lightweight Polypropylene/Stainless-Steel Fiber Composite Foams with Low Percolation for Efficient Electromagnetic Interference Shielding
Aboutaleb Ameli et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Superamphiphobic nanofibrous membranes for effective filtration of fine particles
Na Wang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)
Design, preparation, and application of ordered porous polymer materials
Qingquan Liu et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Crystallization of hard segment domains with the presence of butane for microcellular thermoplastic polyurethane foams
Nemat J. Hossieny et al.
POLYMER (2014)
Structure-properties relations in flexible polyurethane foams containing a novel bio-based crosslinker
Zhiyuan Lan et al.
POLYMER (2014)
Unique interfacial and confined porous morphology of PLA/PS blends in supercritical carbon dioxide
Xia Liao et al.
RSC ADVANCES (2014)
Electrospun flexible self-standing γ-alumina fibrous membranes and their potential as high-efficiency fine particulate filtration media
Yan Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Critical processing parameters for foamed bead manufacturing in a lab-scale autoclave system
Yanting Guo et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Challenges and advances in the field of self-assembled membranes
Patrick van Rijn et al.
CHEMICAL SOCIETY REVIEWS (2013)
Ultrasonic sealing versus heat conductive sealing of polyethylene/polybutene-1 peel films
Michael Nase et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Bioactive nanomembranes of semiconductor polythiophene and thermoplastic polyurethane: thermal, nanostructural and nanomechanical properties
Maria M. Perez Madrigal et al.
POLYMER CHEMISTRY (2013)
Robust Microsieves with Excellent Solvent Resistance: Cross-Linkage of Perforated Polymer Films with Honeycomb Structure
Can Du et al.
ACS MACRO LETTERS (2013)
The effect of processing variables on morphological and mechanical properties of supercritical CO2 foamed scaffolds for tissue engineering
Lisa J. White et al.
ACTA BIOMATERIALIA (2012)
Studies of 4,4′-diphenylmethane diisocyanate (MDI)/1,4-butanediol (BDO) based TPUs by in situ and moving-window two-dimensional correlation infrared spectroscopy: Understanding of multiple DSC endotherms from intermolecular interactions and motions level
Cong Li et al.
POLYMER (2012)
Melt Blending In situ Enhances the Interaction between Polystyrene and Graphene through π-π Stacking
Bin Shen et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Tough Graphene-Polymer Microcellular Foams for Electromagnetic Interference Shielding
Hao-Bin Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Microcellular and nanocellular solid-state polyetherimide (PEI) foams using sub-critical carbon dioxide II. Tensile and impact properties
Dustin Miller et al.
POLYMER (2011)
Polymeric materials as anion-exchange membranes for alkaline fuel cells
Guillaume Couture et al.
PROGRESS IN POLYMER SCIENCE (2011)
Self-Assembled Block Copolymer Thin Films as Water Filtration Membranes
William A. Phillip et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
Carbonaceous Nanofiber Membranes for Selective Filtration and Separation of Nanoparticles
Hai-Wei Liang et al.
ADVANCED MATERIALS (2010)
Preparation of Microcellular Poly(ethylene-co-octene) Rubber Foam with Supercritical Carbon Dioxide
Wentao Zhai et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Role of Increased Crystallinity in Deformation-Induced Structure of Segmented Thermoplastic Polyurethane Elastomers with PEO and PEO-PPO-PEO Soft Segments and HDI Hard Segments
Ryan S. Waletzko et al.
MACROMOLECULES (2009)
Thermal stability and flame retardancy of polyurethanes
D. K. Chattopadhyay et al.
PROGRESS IN POLYMER SCIENCE (2009)
Foaming behavior of polypropylene/polystyrene blends enhanced by improved interfacial compatibility
Wentao Zhai et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2008)
Thermoplastic poly(ester urethane)s with novel soft segments
Benjamin F. Pierce et al.
MACROMOLECULES (2008)
Use of nitrogen as a blowing agent for the production of fine-celled high-density polyethylene foams
John W. S. Lee et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2006)
Heterogeneous nucleation uniformizing cell size distribution in microcellular nanocomposites foams
Wentao Zhai et al.
POLYMER (2006)
Membrane processes in biotechnology: An overview
Catherine Charcosset
BIOTECHNOLOGY ADVANCES (2006)
Controlled foaming of polymer films through restricted surface diffusion and the addition of nanosilica particles or CO2-philic surfactants
S Siripurapu et al.
MACROMOLECULES (2005)
Silicon nitride nanosieve membrane
HD Tong et al.
NANO LETTERS (2004)
Surface-constrained foaming of polymer thin films with supercritical carbon dioxide
S Siripurapu et al.
MACROMOLECULES (2004)
Low-temperature, surface-mediated foaming of polymer films
S Siripurapu et al.
ADVANCED MATERIALS (2004)
Polymer-clay nanocomposite foams prepared using carbon dioxide
CC Zeng et al.
ADVANCED MATERIALS (2003)
Microcellular foams from polyethersulfone and polyphenylsulfone - Preparation and mechanical properties
HL Sun et al.
EUROPEAN POLYMER JOURNAL (2002)
Filtration of lager beer with microsieves: flux, permeate haze and in-line microscope observations
S Kuiper et al.
JOURNAL OF MEMBRANE SCIENCE (2002)
The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams
AE Markaki et al.
ACTA MATERIALIA (2001)