Related references
Note: Only part of the references are listed.Mechanical performance of epoxy coated AR-glass fabric Textile Reinforced Mortar: Influence of coating thickness and formulation
Massimo Messori et al.
COMPOSITES PART B-ENGINEERING (2018)
Silica coating for interphase bond enhancement of carbon and AR-glass Textile Reinforced Mortar (TRM)
C. Signorini et al.
COMPOSITES PART B-ENGINEERING (2018)
Thermomechanical behaviour and residual properties of textile reinforced concrete (TRC) subjected to elevated and high temperature loading: Experimental and comparative study
Tala Tlaiji et al.
COMPOSITES PART B-ENGINEERING (2018)
Comparison between different tensile test set-ups for the mechanical characterization of inorganic-matrix composites
T. D'Antino et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Experimental and analytical study of the thermo-mechanical behaviour of textile-reinforced concrete (TRC) at elevated temperatures: Role of discontinuous short glass fibres
Omayma Homoro et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Tensile Properties of Carbon Fiber-Textile Reinforced Mortar (TRM) Characterized by Different Anchorage Methods
Hee-Seung Kim et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)
Seismic performance of reinforced concrete columns retrofitted by various methods
Gia Toai Truong et al.
ENGINEERING STRUCTURES (2017)
Tensile behaviour of a basalt TRM strengthening system: Influence of mortar and reinforcing textile ratios
Carmelo Caggegi et al.
COMPOSITES PART B-ENGINEERING (2017)
TRM versus FRP in flexural strengthening of RC beams: Behaviour at high temperatures
Saad M. Raoof et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements
Francesca Giulia Carozzi et al.
COMPOSITES PART B-ENGINEERING (2017)
Bond between TRM versus FRP composites and concrete at high temperatures
Saad M. Raoof et al.
COMPOSITES PART B-ENGINEERING (2017)
Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate
Marianovella Leone et al.
COMPOSITES PART B-ENGINEERING (2017)
Comparative characterization of the durability behaviour of textile-reinforced concrete (TRC) under tension and bending
Kanhchana Kong et al.
COMPOSITE STRUCTURES (2017)
Test methods for Textile Reinforced Mortar systems
Stefano De Santis et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental study on basalt textile reinforced concrete under uniaxial tensile loading
Yunxing Du et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental investigation of tensile fatigue behaviour of Textile-Reinforced Concrete (TRC): Effect of fatigue load and strain rate
Z. Mesticou et al.
COMPOSITE STRUCTURES (2017)
Loading rate effect on the debonding phenomenon in fiber reinforced cementitious matrix-concrete joints
Christian Carloni et al.
COMPOSITES PART B-ENGINEERING (2017)
Fabric-reinforced cementitious matrix behavior at high-temperature: Experimental and numerical results
Jacopo Donnini et al.
COMPOSITES PART B-ENGINEERING (2017)
Mechanical properties of FRCM using carbon fabrics with different coating treatments
Jacopo Donnini et al.
COMPOSITES PART B-ENGINEERING (2016)
Bond between textile-reinforced mortar (TRM) and concrete substrates: Experimental investigation
Saad M. Raoof et al.
COMPOSITES PART B-ENGINEERING (2016)
TRM vs FRP jacketing in shear strengthening of concrete members subjected to high temperatures
Zoi C. Tetta et al.
COMPOSITES PART B-ENGINEERING (2016)
Experimental study of the effect of simultaneous mechanical and high-temperature loadings on the behaviour of textile-reinforced concrete (TRC)
Thanh Hai Nguyen et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of surface treatment on mechanical properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites
N. Karunagaran et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Analysis of the bond between Fabric Reinforced Cementitious Mortar (FRCM) strengthening systems and concrete
Luciano Ombres
COMPOSITES PART B-ENGINEERING (2015)
Tensile behaviour of mortar-based composites for externally bonded reinforcement systems
Stefano De Santis et al.
COMPOSITES PART B-ENGINEERING (2015)
Bond characteristics of carbon fabric-reinforced cementitious matrix in double shear tests
Oluwafunmilayo Awani et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints
Tommaso D'Antino et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Experimental and analytical study of reinforced concrete beams shear strengthened with different types of textile-reinforced mortar
Christian Escrig et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tension
Pello Larrinaga et al.
COMPOSITES PART B-ENGINEERING (2013)
Cyclic responses of reinforced concrete composite columns strengthened in the plastic hinge region by HPFRC mortar
Chang-Geun Cho et al.
COMPOSITE STRUCTURES (2012)
Effects of Temperature on Tensile Strength of Carbon fiber and Carbon/Epoxy Composite Sheets
Shenghu Cao et al.
NEW MATERIALS AND PROCESSES, PTS 1-3 (2012)
Retrofitting of reinforced concrete beams using composite laminates
Yasmeen Taleb Obaidat et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Durability of textile reinforced concrete made with AR glass fibre: effect of the matrix composition
Marko Butler et al.
MATERIALS AND STRUCTURES (2010)
Review of fire structural modelling of polymer composites
A. P. Mouritz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
The effect of high temperature on compressive strength and splitting tensile strength of structural lightweight concrete containing fly ash
Harun Tanyildizi et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Laminate theory analysis of composites under load in fire
AG Gibson et al.
JOURNAL OF COMPOSITE MATERIALS (2006)