Related references
Note: Only part of the references are listed.The Critical Impact of Material and Process Compatibility on the Active Layer Morphology and Performance of Organic Ternary Solar Cells
Joo-Hyun Kim et al.
ADVANCED ENERGY MATERIALS (2019)
High-Performance and Uniform 1 cm(2) Polymer Solar Cells with D-1-A-D-2-A-Type Random Terpolymers
Injeong Shin et al.
ADVANCED ENERGY MATERIALS (2018)
A Facile Method to Fine-Tune Polymer Aggregation Properties and Blend Morphology of Polymer Solar Cells Using Donor Polymers with Randomly Distributed Alkyl Chains
Huatong Yao et al.
ADVANCED ENERGY MATERIALS (2018)
Feasible D1-A-D2-A Random Copolymers for Simultaneous High-Performance Fullerene and Nonfullerene Solar Cells
Mingyu Jeong et al.
ADVANCED ENERGY MATERIALS (2018)
P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods
S. Strohm et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Efficient Non-Fullerene Organic Photovoltaic Modules Incorporating As-Cast and Thickness-Insensitive Photoactive Layers
Tong Zhang et al.
ADVANCED ENERGY MATERIALS (2018)
Overcoming the Thermal Instability of Efficient Polymer Solar Cells by Employing Novel Fullerene-Based Acceptors
Chaohong Zhang et al.
ADVANCED ENERGY MATERIALS (2017)
In-line, roll-to-roll morphology analysis of organic solar cell active layers
Lea Hildebrandt Rossander et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Thienothiophene-based copolymers for high-performance solar cells, employing different orientations of the thiazole group as a π bridge
Dangqiang Zhu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
High-efficiency photovoltaic cells with wide optical band gap polymers based on fluorinated phenylene-alkoxybenzothiadiazole
Seo-Jin Ko et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering
Jiahui Wan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Highly crystalline low-bandgap polymer nanowires towards high-performance thick-film organic solar cells exceeding 10% power conversion efficiency
Jaewon Lee et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Thiophene-benzothiadiazole based D-A1-D-A2 type alternating copolymers for polymer solar cells
Gururaj P. Kini et al.
POLYMER CHEMISTRY (2017)
Enhancing Performance of Large-Area Organic Solar Cells with Thick Film via Ternary Strategy
Jianqi Zhang et al.
SMALL (2017)
Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing
Ning Li et al.
NATURE COMMUNICATIONS (2017)
Densely Packed Random Quarterpolymers Containing Two Donor and Two Acceptor Units: Controlling Absorption Ability and Molecular Interaction to Enable Enhanced Polymer Photovoltaic Devices
So-Huei Kang et al.
ADVANCED ENERGY MATERIALS (2017)
Eco-Friendly Solvent-Processed Fullerene-Free Polymer Solar Cells with over 9.7% Efficiency and Long-Term Performance Stability
Gi Eun Park et al.
Advanced Energy Materials (2017)
Thick Film Polymer Solar Cells Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%
Yaocheng Jin et al.
ADVANCED ENERGY MATERIALS (2017)
Conjugated Polymers Based on Difluorobenzoxadiazole toward Practical Application of Polymer Solar Cells
Junyi Wang et al.
ADVANCED ENERGY MATERIALS (2017)
Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend
Xiaodan Gu et al.
ADVANCED ENERGY MATERIALS (2017)
Effects of morphology evolution on solution-processed small molecule photovoltaics via a solvent additive
Quoc Viet Hoang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Non-halogenated solvent-processed single-junction polymer solar cells with 9.91% efficiency and improved photostability
Xunfan Liao et al.
NANO ENERGY (2017)
Room temperature processed polymers for high-efficient polymer solar cells with power conversion efficiency over 9%
Xunfan Liao et al.
NANO ENERGY (2017)
Regulating Molecular Aggregations of Polymers via Ternary Copolymerization Strategy for Efficient Solar Cells
Qian Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
A Difluorobenzoxadiazole Building Block for Efficient Polymer Solar Cells
Jingbo Zhao et al.
ADVANCED MATERIALS (2016)
High-Performance Photovoltaic Polymers Employing Symmetry-Breaking Building Blocks
Deyu Liu et al.
ADVANCED MATERIALS (2016)
Molecular Lock: A Versatile Key to Enhance Efficiency and Stability of Organic Solar Cells
Pei Cheng et al.
ADVANCED MATERIALS (2016)
A Novel Naphtho[1,2-c:5,6-c′]Bis([1,2,5] Thiadiazole)-Based Narrow-Bandgap π-Conjugated Polymer with Power Conversion Efficiency Over 10%
Yaocheng Jin et al.
ADVANCED MATERIALS (2016)
Head-to-Head Linkage Containing Bithiophene-Based Polymeric Semiconductors for Highly Efficient Polymer Solar Cells
Shengbin Shi et al.
ADVANCED MATERIALS (2016)
Morphology changes upon scaling a high-efficiency, solution-processed solar cell
Hyun Wook Ro et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Toward Practical Useful Polymers for Highly Efficient Solar Cells via a Random Copolymer Approach
Chunhui Duan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Implication of Fluorine Atom on Electronic Properties, Ordering Structures, and Photovoltaic Performance in NaphthobisthiadiazoleBased Semiconducting Polymers
Kazuaki Kawashima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing
Zhaojun Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
A series connection architecture for large-area organic photovoltaic modules with a 7.5% module efficiency
Soonil Hong et al.
NATURE COMMUNICATIONS (2016)
High-Performance Small Molecule via Tailoring Intermolecular Interactions and its Application in Large-Area Organic Photovoltaic Modules
Sachin Badgujar et al.
ADVANCED ENERGY MATERIALS (2016)
Achieving a solar power conversion efficiency exceeding 9% by modifying the structure of a simple, inexpensive and highly scalable polymer
Gururaj P. Kini et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Critical factors governing vertical phase separation in polymer-PCBM blend films for organic solar cells
Min Kim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Efficient organic solar cells processed from hydrocarbon solvents
Jingbo Zhao et al.
NATURE ENERGY (2016)
Asymmetric Electron-Donating 4-Alkyl-8-alkoxybenzo[1,2-b:4,5-b′]dithiophene Unit for Use in High-Efficiency Bulk Heterojunction Polymer Solar Cells
Quoc Viet Hoang et al.
MACROMOLECULES (2015)
Efficient inverted polymer solar cells employing favourable molecular orientation
Varun Vohra et al.
NATURE PHOTONICS (2015)
Band gap tunable benzodithiophene-based donor-rich semi-random D-A copolymers with active layer thickness tolerance for organic solar cells
Thi Thu Trang Bui et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Efficient Low-Bandgap Polymer Solar Cells with High Open-Circuit Voltage and Good Stability
Tingxuan Ma et al.
ADVANCED ENERGY MATERIALS (2015)
Influence of Processing Parameters and Molecular Weight on the Morphology and Properties of High-Performance PffBT4T-2OD:PC71BM Organic Solar Cells
Wei Ma et al.
ADVANCED ENERGY MATERIALS (2015)
Highly Efficient and Stable Solar Cells Based on Thiazolothiazole and Naphthobisthiadiazole Copolymers
Masahiko Saito et al.
SCIENTIFIC REPORTS (2015)
Competitive Absorption and Inefficient Exciton Harvesting: Lessons Learned from Bulk Heterojunction Organic Photovoltaics Utilizing the Polymer Acceptor P(NDI2OD-T2)
Zhi Li et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Thermal Stabilisation of Polymer-Fullerene Bulk Heterojunction Morphology for Effi cient Photovoltaic Solar Cells
Lionel Derue et al.
ADVANCED MATERIALS (2014)
High-Efficiency All-Polymer Solar Cells Based on a Pair of Crystalline Low-Bandgap Polymers
Cheng Mu et al.
ADVANCED MATERIALS (2014)
Bulk Heterojunction Solar Cells: Morphology and Performance Relationships
Ye Huang et al.
CHEMICAL REVIEWS (2014)
Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device
T. L. Nguyen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Yuhang Liu et al.
NATURE COMMUNICATIONS (2014)
Film Morphology of High Efficiency Solution-Processed Small-Molecule Solar Cells
John A. Love et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Roll-to-Roll fabrication of large area functional organic materials
Roar R. Sondergaard et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)
Naphthodithiophene-Naphthobisthiadiazole Copolymers for Solar Cells: Alkylation Drives the Polymer Backbone Flat and Promotes Efficiency
Itaru Osaka et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Morphological Stabilization by In Situ Polymerization of Fullerene Derivatives Leading to Efficient, Thermally Stable Organic Photovoltaics
Yen-Ju Cheng et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Molecular Design and Ordering Effects in π-Functional Materials for Transistor and Solar Cell Applications
Pierre M. Beaujuge et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Donor Acceptor Conjugated Polymer Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for High-Performance Polymer Solar Cells
Ming Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Consensus stability testing protocols for organic photovoltaic materials and devices
Matthew O. Reese et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Gold nanoparticle-templated assembly of oligothiophenes: preparation and film properties
Ken-ichi Saitou et al.
TETRAHEDRON (2011)
Conjugated polymer-based organic solar cells
Serap Guenes et al.
CHEMICAL REVIEWS (2007)
Polythiophene containing thermally removable solubilizing groups enhances the interface and the performance of polymer-titania hybrid solar cells
JS Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)