Related references
Note: Only part of the references are listed.Poly (lactic acid) blends: Processing, properties and applications
Mohammadreza Nofar et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
A new finding for carbon nanotubes in polymer blends: Reduction of nanotube breakage during melt mixing
Jiaxi Guo et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)
Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio-polyamide11 blends
Vahid Heshmati et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2018)
Kinetic Control of Graphene Localization in Co-continuous Polymer Blends via Melt Compounding
Lian Bai et al.
LANGMUIR (2018)
Effect of Graphene Oxide on Structure and Properties of Impact-Modified Polyamide 6
Ivan Kelnar et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)
Morphology, rheology property, and crystallization behavior of PLLA/OMMT nanocomposites prepared by an innovative eccentric rotor extruder
Ting Wu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2018)
Enhanced Interfacial Adhesion by Reactive Carbon Nanotubes: New Route to High-Performance Immiscible Polymer Blend Nanocomposites with Simultaneously Enhanced Toughness, Tensile Strength, and Electrical Conductivity
Xuewen Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Manipulating the Filler Network Structure and Properties of Polylactide/Carbon Black Nanocomposites with the Aid of Stereocomplex Crystallites
Huili Liu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Influence of Nanoclay Localization on Structure-Property Relationships of Polylactide-Based Biodegradable Blend Nanocomposites
Reza Salehiyan et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
PLA-PBAT-PLA tri-block copolymers: Effective compatibilizers for promotion of the mechanical and rheological properties of PLA/PBAT blends
Yue Ding et al.
POLYMER DEGRADATION AND STABILITY (2018)
Control of hydrolytic degradation of Poly(lactic acid) by incorporation of chain extender: From bulk to surface erosion
Fabiola Iniguez-Franco et al.
POLYMER TESTING (2018)
Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates
Chamaiporn Yamoum et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies
M. Nofar et al.
EUROPEAN POLYMER JOURNAL (2017)
Recycling of poly (lactic acid)/silk based bionanocomposites films and its influence on thermal stability, crystallization kinetics, solution and melt rheology
Melakuu Tesfaye et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)
Interplay between structure and property of graphene nanoplatelet networks formed by an electric field in a poly(lactic acid) matrix
Oh Min Kwon et al.
JOURNAL OF RHEOLOGY (2017)
Localizing graphene at the interface of cocontinuous polymer blends: Morphology, rheology, and conductivity of cocontinuous conductive polymer composites
Lian Bai et al.
JOURNAL OF RHEOLOGY (2017)
Star vs long chain branching of poly(lactic acid) with multifunctional aziridine
Liangliang Gu et al.
JOURNAL OF RHEOLOGY (2017)
Graphite nanoplatelets-modified PLA/PCL: Effect of blend ratio and nanofiller localization on structure and properties
Ivan Kelnar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Rheology of Nanosilica-Compatibilized Immiscible Polymer Blends: Formation of a Heterogeneous Network Facilitated by Interfacially Anchored Hybrid Nanosilica
Hengti Wang et al.
MACROMOLECULES (2017)
Chemical modification of poly(lactic acid) and its use as matrix in poly(lactic acid) poly(butylene adipate-co-terephthalate) blends
Talita Rocha Rigolin et al.
POLYMER TESTING (2017)
The Distribution of Nanoclay Particles at the Interface and Their Influence on the Microstructure Development and Rheological Properties of Reactively Processed Biodegradable Polylactide/Poly(butylene succinate) Blend Nanocomposites
Reza Salehiyan et al.
POLYMERS (2017)
Promoting compatibilization effect of graphene oxide on immiscible PS/PVDF blend via water-assisted mixing extrusion
Jun Tong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers
Fatemeh Safdari et al.
CELLULOSE (2017)
Remarkably Enhanced Impact Toughness and Heat Resistance of poly(L-Lactide)/Thermoplastic Polyurethane Blends by Constructing Stereocomplex Crystallites in the Matrix
Zhenwei Liu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Poly(lactic acid) blends in biomedical applications
P. Saini et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Shear rheology of polylactide (PLA)-cellulose nanocrystal (CNC) nanocomposites
Davood Bagheriasl et al.
CELLULOSE (2016)
Application of linear rheology in determination of nanoclay localization in PLA/EVA/Clay nanocomposites: Correlation with microstructure and thermal properties
Masoud Razavi Aghjeh et al.
COMPOSITES PART B-ENGINEERING (2016)
The effect of the interfacial assembly of nano-silica in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends on morphology, rheology and mechanical properties
Ebrahim Jalali Dil et al.
EUROPEAN POLYMER JOURNAL (2016)
Photochemical reactivity of PLA at the vicinity of glass transition temperature. The photo-rheology method
Adam A. Marek et al.
EUROPEAN POLYMER JOURNAL (2016)
Preparation and Properties of Polylactic Acid (PLA)/Silica Nanocomposites
Sun-Mou Lai et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2016)
Poly[(butylene succinate)-co-(butylene adipate)]-Montmorillonite Nanocomposites Prepared by Water-Assisted Extrusion: Role of the Dispersion Level and of the Structure-Microstructure on the Enhanced Barrier Properties
Sebastien Charlon et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2016)
Coalescence in PLA-PBAT blends under shear flow: Effects of blend preparation and PLA molecular weight
M. Nofar et al.
JOURNAL OF RHEOLOGY (2016)
Synthesis and Rheology of Branched Multiblock Polymers Based on Polylactide
Alexander M. Mannion et al.
MACROMOLECULES (2016)
Characterization of Compatibilizing Effect of Organoclay in Poly(lactic acid) and Natural Rubber Blends by FT-Rheology
Hyun Geun Ock et al.
MACROMOLECULES (2016)
Effects of nanoclay and its localization on the morphology stabilization of PLA/PBAT blends under shear flow
M. Nofar et al.
POLYMER (2016)
Shear-induced nonisothermal crystallization of two grades of PLA
Joanna Bojda et al.
POLYMER TESTING (2016)
Rheology and crystallization behavior of asymmetric PLLA/PDLA blends based on linear PLLA and PDLA with different structures
Zhanxin Jing et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2016)
Dynamics of partially miscible polylactide-poly(ε-caprolactone) blends in the presence of cold crystallization
Maziar Derakhshandeh et al.
RHEOLOGICA ACTA (2016)
Dramatic Improvement in Toughness of PLLA/PVDF Blends: the Effect of Compatibilizer Architectures
Wenyong Dong et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Effects of nano-/micro-sized additives and the corresponding induced crystallinity on the extrusion foaming behavior of PLA using supercritical CO2
Mohammadreza Nofar
MATERIALS & DESIGN (2016)
Effect of cellulose nanocrystals (CNC) on rheological and mechanical properties and crystallization behavior of PLA/CNC nanocomposites
Musa R. Kamal et al.
CARBOHYDRATE POLYMERS (2015)
Graphene Nanoplatelets as Rheology Modifiers for Polylactic Acid: Graphene Aspect-Ratio-Dependent Nonlinear Rheological Behavior
Mohammad Sabzi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Improvement of barrier properties of bio-based polyester nanocomposite membranes by water-assisted extrusion
Sebastien Charlon et al.
JOURNAL OF MEMBRANE SCIENCE (2015)
Effect of extensional viscosity on cocontinuity of immiscible polymer blends
Aaron T. Hedegaard et al.
JOURNAL OF RHEOLOGY (2015)
Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow
M. Nofar et al.
JOURNAL OF RHEOLOGY (2015)
Using viscoelastic properties to quantitatively estimate the amount of modified poly(lactic acid) chains through reactive extrusion
Jonathan Cailloux et al.
JOURNAL OF RHEOLOGY (2015)
Effect of chemical and physical branching on rheological behavior of polylactide
Sahar Nouri et al.
JOURNAL OF RHEOLOGY (2015)
Localization of micro- and nano-silica particles in heterophase poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends
Ebrahim Jalali Dil et al.
POLYMER (2015)
Percolation networks and transient rheology of polylactide composites containing graphite nanosheets with various thicknesses
Yi Wang et al.
POLYMER (2015)
Entanglement network formed in miscible PLA/PMMA blends and its role in rheological and thermo-mechanical properties of the blends
Xiaoqiong Hao et al.
POLYMER (2015)
Morphology, miscibility and continuity development in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends
Ebrahim Jalali Dil et al.
POLYMER (2015)
Development of polylactide bead foams with double crystal melting peaks
Mohammadreza Nofar et al.
POLYMER (2015)
Quiescent and shear-induced crystallization of linear and branched polylactides
Naqi Najafi et al.
RHEOLOGICA ACTA (2015)
Rheology, thermal properties, and foaming behavior of high D-content polylactic acid/cellulose nanofiber composites
WeiDan Ding et al.
RSC Advances (2015)
Biopolymer Blends Based on Poly (lactic acid): Shear and Elongation Rheology/Structure/Blowing Process Relationships
Racha Al-Itry et al.
POLYMERS (2015)
Superior Performance of Fully Biobased Poly(lactide) via Stereocomplexation-Induced Phase Separation: Structure versus Property
Piming Ma et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
A novel technology to manufacture biodegradable polylactide bead foam products
Mohammadreza Nofar et al.
MATERIALS & DESIGN (2015)
Reactive extrusion of PLA, PBAT with a multi-functional epoxide: Physico-chemical and rheological properties
Racha Al-Itry et al.
EUROPEAN POLYMER JOURNAL (2014)
Modelling of PLA melt rheology and batch mixing energy balance
Pierre Erwan Le Marec et al.
EUROPEAN POLYMER JOURNAL (2014)
Rheology of compatibilized immiscible blends with droplet-matrix and cocontinuous morphologies during coarsening
Carlos R. Lopez-Barron et al.
JOURNAL OF RHEOLOGY (2014)
Rheological and thermal properties of stereocomplexed polylactide films
Jasim Ahmed et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)
Stereocomplex Formation in Enantiomeric Polylactides by Melting Recrystallization of Homocrystals: Crystallization Kinetics and Crystal Morphology
Bing Na et al.
MACROMOLECULES (2014)
Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites
Xin-Feng Wei et al.
MACROMOLECULES (2014)
Rheology and crystallisation of PLA containing PLA-grafted nanosilica
Y. Zhang et al.
PLASTICS RUBBER AND COMPOSITES (2014)
Extruded PLA/clay nanocomposite foams blown with supercritical CO2
M. Keshtkar et al.
POLYMER (2014)
Nanoparticle-induced co-continuity in immiscible polymer blends - A comparative study on bio-based PLA-PA11 blends filled with organoclay, sepiolite, and carbon nanotubes
A. Nuzzo et al.
POLYMER (2014)
Thermal and hydrolytic degradation kinetics of PLA in the molten state
V. Speranza et al.
POLYMER DEGRADATION AND STABILITY (2014)
Improvement of Blown Film Extrusion of Poly(Lactic Acid): Structure-Processing-Properties Relationships
Benoit Mallet et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Poly (lactic acid) foaming
Mohammadreza Nofar et al.
PROGRESS IN POLYMER SCIENCE (2014)
Rheological and foaming behavior of linear and branched polylactides
Naqi Najafi et al.
RHEOLOGICA ACTA (2014)
Thermal, Rheological and Morphological Properties of Poly (Lactic Acid) (PLA) and Talc Composites
Talita Ferreira Cipriano et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2014)
Assessing the mechanical, phase inversion, and rheological properties of poly-[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] (PHBV) blended with poly-(L-lactic acid) (PLA)
Sunny Modi et al.
EUROPEAN POLYMER JOURNAL (2013)
Sheets of branched poly(lactic acid) obtained by one step reactive extrusion calendering process: Melt rheology analysis
J. Cailloux et al.
EXPRESS POLYMER LETTERS (2013)
Elongational rheology of biodegradable poly(lactic acid)/poly[(butylene succinate)-co-adipate] binary blends and poly(lactic acid)/poly[(butylene succinate)-co-adipate]/clay ternary nanocomposites
Hassan Eslami et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Synthesis and characterization of PLA nanocomposites containing nanosilica modified with different organosilanes II: Effect of the organosilanes on the properties of nanocomposites: Thermal characterization
Luca Basilissi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effect of a chain extender on the rheological and mechanical properties of biodegradable poly(lactic acid)/poly[(butylene succinate)-co-adipate] blends
Hassan Eslami et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Grafting polymerization of polylactic acid on the surface of nano-SiO2 and properties of PLA/PLA-grafted-SiO2 nanocomposites
Feng Wu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Processing and characterization of solid and foamed injection-molded polylactide with talc
Aboutaleb Ameli et al.
JOURNAL OF CELLULAR PLASTICS (2013)
Effect of organoclay on non-linear rheological properties of poly(lactic acid)/poly(caprolactone) blends
Reza Salehiyan et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2013)
A morphological study on the dispersion and selective localization behavior of graphene nanoplatelets in immiscible polymer blends of PC and SAN
Marco Liebscher et al.
POLYMER (2013)
Effects of nano-/micro-sized additives on the crystallization behaviors of PLA and PLA/CO2 mixtures
Mohammadreza Nofar et al.
POLYMER (2013)
Insight into industrial PLA aging process by complementary use of rheology, HPLC, and MALDI
Sonia Dopico-Garcia et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2013)
Graphene nanoplatelets as poly(lactic acid) modifier: linear rheological behavior and electrical conductivity
Mohammad Sabzi et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Trapping carbon nanotubes at the interface of a polymer blend through adding graphene oxide: a facile strategy to reduce electrical resistivity
Jie Chen et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Continuous processing of low-density, microcellular poly(lactic acid) foams with controlled cell morphology and crystallinity
Jing Wang et al.
CHEMICAL ENGINEERING SCIENCE (2012)
Morphology and molten-state rheology of polylactide and polyhydroxyalkanoate blends
Thibaut Gerard et al.
EUROPEAN POLYMER JOURNAL (2012)
Rheology and Crystallization of Long-Chain Branched Poly(L-lactide)s with Controlled Branch Length
Liangyan Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Morphology and melt rheology of biodegradable poly(lactic acid)/poly(butylene succinate adipate) blends: effect of blend compositions
Zong-yan Gui et al.
IRANIAN POLYMER JOURNAL (2012)
Rheological and thermal properties of polylactide/organic montmorillonite nanocomposites
Biao Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Rheological and morphological properties of reactively compatibilized thermoplastic olefin (TPO) blends
Amirhossein Maani et al.
JOURNAL OF RHEOLOGY (2012)
Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes
Sajjad Saeidlou et al.
POLYMER (2012)
Effect of dissolved CO2 on the crystallization behavior of linear and branched PLA
M. Nofar et al.
POLYMER (2012)
Rheology and biodegradation of polylactide/silica nanocomposites
Yi Li et al.
POLYMER COMPOSITES (2012)
Control of thermal degradation of polylactide (PLA)-clay nanocomposites using chain extenders
N. Najafi et al.
POLYMER DEGRADATION AND STABILITY (2012)
Control of thermal degradation of polylactide/clay nanocomposites during melt processing by chain extension reaction
Qingkai Meng et al.
POLYMER DEGRADATION AND STABILITY (2012)
Morphology and rheological behavior of polylactic acid/clay nanocomposites
Satpal Singh et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Properties of linear poly(lactic acid)/polyethylene glycol blends
K. Sungsanit et al.
POLYMER ENGINEERING AND SCIENCE (2012)
Poly(lactic acid) crystallization
Sajjad Saeidlou et al.
PROGRESS IN POLYMER SCIENCE (2012)
Wall slip and melt fracture of poly(lactides)
Norhayani Othman et al.
RHEOLOGICA ACTA (2012)
Dynamic Rheological Behavior and Morphology of Polylactide/Poly(butylenes adipate-co-terephthalate) Blends with Various Composition Ratios
Ke Li et al.
ADVANCES IN POLYMER TECHNOLOGY (2011)
Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide
Mohammadreza Nofar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Rheological and Topological Characterizations of Electron Beam Irradiation Prepared Long-Chain Branched Polylactic Acid
Yongbin Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Dynamic Rheology and Morphology of Polylactide/Organic Montmorillonite Nanocomposites
Biao Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Solution and melt viscoelastic properties of controlled microstructure poly(lactide)
Norhayani Othman et al.
JOURNAL OF RHEOLOGY (2011)
Rheological properties of polymer composites with flexible fine fibers
Tadashi Yokohara et al.
JOURNAL OF RHEOLOGY (2011)
Shape-Dependent Localization of Carbon Nanotubes and Carbon Black in an Immiscible Polymer Blend during Melt Mixing
Andreas Goeldel et al.
MACROMOLECULES (2011)
Rheological Responses and Morphology of Polylactide/Linear Low Density Polyethylene Blends Produced by Different Mixing Type
Guo Jiang et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2011)
Relations Between the Aspect Ratio of Carbon Nanotubes and the Formation of Percolation Networks in Biodegradable Polylactide/Carbon Nanotube Composites
Defeng Wu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)
Viscoelastic Interfacial Properties of Compatibilized Poly(epsilon-caprolactone)/Polylactide Blend
Defeng Wu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)
Morphology, rheology and crystallization behavior of polylactide composites prepared through addition of five-armed star polylactide grafted multiwalled carbon nanotubes
Zhaohua Xu et al.
POLYMER (2010)
Studies on the interactions of CO2 with biodegradable poly(DL-lactic acid) and poly(lactic acid-co-glycolic acid) copolymers using high pressure ATR-IR and high pressure rheology
Hongyun Tai et al.
POLYMER (2010)
Localization of carbon nanotubes at the interface in blends of polyamide and ethylene-acrylate copolymer
Anne-Christine Baudouin et al.
POLYMER (2010)
Interface localization of carbon nanotubes in blends of two copolymers
Anne-Christine Baudouin et al.
POLYMER DEGRADATION AND STABILITY (2010)
Rheology and Extrusion Foaming of Chain-Branched Poly(lactic acid)
Mihaela Mihai et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Poly(lactic acid) modifications
Rahul M. Rasal et al.
PROGRESS IN POLYMER SCIENCE (2010)
An Investigation of Melt Rheology and Thermal Stability of Poly(lactic acid)/Poly(butylene succinate) Nanocomposites
Amita Bhatia et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Structure-Rheology Responses of Polylactide/Calcium Carbonate Composites
Shu-Ying Gu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Mechanical and Rheological Properties of Epoxidized Soybean Oil Plasticized Poly(lactic acid)
Yu-Qiong Xu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Uneven distribution of nanoparticles in immiscible fluids: Morphology development in polymer blends
F. Fenouillot et al.
POLYMER (2009)
Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends
Shu-Ying Gu et al.
CARBOHYDRATE POLYMERS (2008)
Phase behavior and its viscoelastic response of polylactide/poly(ε-caprolactone) blend
Defeng Wu et al.
EUROPEAN POLYMER JOURNAL (2008)
Viscoelasticity and thermal stability of polylactide composites with various functionalized carbon nanotubes
Defeng Wu et al.
POLYMER DEGRADATION AND STABILITY (2008)
Processing technologies for poly(lactic acid)
L-T Lim et al.
PROGRESS IN POLYMER SCIENCE (2008)
Processing and characterization of biodegradable polymer nanocomposites: detection of dispersion state
Natalia V. Pogodina et al.
RHEOLOGICA ACTA (2008)
Cutting effect of organoclay platelets in compatibilizing immiscible polypropylene/polystyrene blends
Yan Zhu et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2008)
Melt rheology of polylactide/montmorillonite nanocomposites
Shili-Ying Gu et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2007)
Effect of nucleation and plasticization on the crystallization of poly(lactic acid)
Hongbo Li et al.
POLYMER (2007)
Morphology and rheology on the blends of PLA/CMPS
Boo Young Shin et al.
MACROMOLECULAR RESEARCH (2007)
Poly(lactic acid) fiber: An overview
Bhuvanesh Gupta et al.
PROGRESS IN POLYMER SCIENCE (2007)
Rheology and thermal stability of polylactide/clay nanocomposites
Defeng Wu et al.
POLYMER DEGRADATION AND STABILITY (2006)
Morphology and properties of organoclay modified polycarbonate/poly(methyl methacrylate) blend
S. Sinha Ray et al.
POLYMER ENGINEERING AND SCIENCE (2006)
Rheological characterization of droplet-matrix versus co-continuous morphology
Runming Li et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2006)
A poly(lactic acid)/calcium metaphosphate composite for bone tissue engineering
Y Jung et al.
BIOMATERIALS (2005)
Poly(lactide) stereocomplexes: Formation, structure, properties, degradation, and applications
H Tsuji
MACROMOLECULAR BIOSCIENCE (2005)
Melt rheology of variable L-content poly(lactic acid)
JR Dorgan et al.
JOURNAL OF RHEOLOGY (2005)
Infrared spectroscopic study of CH3•••O=C interaction during poly(L-lactide)/poly(D-lactide) stereocomplex formation
JM Zhang et al.
MACROMOLECULES (2005)
An overview of polylactides as packaging materials
R Auras et al.
MACROMOLECULAR BIOSCIENCE (2004)
Poly(D-lactic acid) as a rheological modifier of poly(L-lactic acid): Shear and biaxial extensional flow behavior
H Yamane et al.
JOURNAL OF RHEOLOGY (2004)
New polylactide/layered silicate nanocomposites, 6 - Melt rheology and foam processing
SS Ray et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2003)
Influence of coalescence and interfacial tension on the morphology of PP/HDPE compatibilized blends
AMC Souza et al.
POLYMER (2002)
Melt rheology of poly(lactic acid): Consequences of blending chain architectures
HJ Lehermeier et al.
POLYMER ENGINEERING AND SCIENCE (2001)
Rheology and morphology of compatibilized polymer blends
P Van Puyvelde et al.
CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2001)
A literature review of poly(lactic acid)
D Garlotta
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2001)
Morphologies and interfacial tensions of immiscible polypropylene/polystyrene blends modified with triblock copolymers
PHP Macaúbas et al.
POLYMER (2001)
Melt rheology of high L-content poly(lactic acid)
LI Palade et al.
MACROMOLECULES (2001)
Estimation of flocculation structure in filled polymer composites by dynamic rheological measurements
G Wu et al.
COLLOID AND POLYMER SCIENCE (2000)
Share Paper
