Related references
Note: Only part of the references are listed.Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
Martin Spoerk et al.
POLYMER COMPOSITES (2019)
Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
Neiko P. Levenhagen et al.
POLYMER (2018)
Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)
Claire Benwood et al.
ACS OMEGA (2018)
Effect of nucleating agents on crystallinity and properties of poly (lactic acid) (PTA)
Laura Aliotta et al.
EUROPEAN POLYMER JOURNAL (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
Neiko P. Levenhagen et al.
POLYMER (2017)
Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
Lu Wang et al.
POLYMER (2017)
Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing
C. McIlroy et al.
POLYMER (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling
Hao Li et al.
RAPID PROTOTYPING JOURNAL (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers
Rafael Thiago Luiz Ferreira et al.
COMPOSITES PART B-ENGINEERING (2017)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
An improved fused deposition modeling process for forming large-size thin-walled parts
Du Jun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
Jianlei Wang et al.
MATERIALS & DESIGN (2016)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing
Angel R. Torrado et al.
ADDITIVE MANUFACTURING (2015)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Additive Manufacturing: Making Imagination the Major Limitation
Yuwei Zhai et al.
JOM (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Mechanical properties of commercial rapid prototyping materials
Jaroslaw Kotlinski
RAPID PROTOTYPING JOURNAL (2014)
Additive manufacturing (AM) and nanotechnology: promises and challenges
Olga Ivanova et al.
RAPID PROTOTYPING JOURNAL (2013)
Effects of talc on the mechanical and thermal properties of polylactide
Fengmei Yu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
M. Nikzad et al.
MATERIALS & DESIGN (2011)
Studies on the Morphology and Properties of PMMA-Organoclay Nanocomposites with Reference to the Manufacturing Techniques
Dibyendu Debnath et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2010)
The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites
Lisman Suryanegara et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Crystallization, Mechanical, and Rheological Behavior of Polyvinylidene Fluoride/Carbon Nanofiber Composites
Shailesh Vidhate et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites
Shao-Yun Fu et al.
COMPOSITES PART B-ENGINEERING (2008)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Effect of nucleation and plasticization on the crystallization of poly(lactic acid)
Hongbo Li et al.
POLYMER (2007)
Measurement of anisotropic compressive strength of rapid prototyping parts
C. S. Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Experimental trends in polymer nanocomposites - a review
J Jordan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Carbon fibers for composites
S Chand
JOURNAL OF MATERIALS SCIENCE (2000)
Share Paper
