Miniaturized 3-D Cross-Type Receiver for Wirelessly Powered Capsule Endoscopy

This paper presents the modeling, implementation, and testing of a cross-type receiver (RX) used for wireless power transfer (WPT) into an endoscopic capsule. A 3-D configuration for the receiver is proposed to increase the wireless link power transfer efficiency (WL-PTE) and enhance its robustness to angular variations of the capsule. The diameter and thickness of the flexible transmitter coils are 200 mm and 185 mu m, respectively. The diameter of the miniaturized RX is 8 mm, which is appropriate for integration within current commercially available capsules. Experimental results demonstrate a WL-PTE of 1.3% and complete system efficiency of 0.9% inside a suitable tissue phantom of the relative permittivity of 300 at 5 MHz. A maximum variation of only 8.4% of the WL-PTE across 90 degrees orientation of the RX was also measured. The minimum WL-PTE of 1% is the recorder for 7-cm translational displacement inside the phantom. A simulated specific absorption rate of 0.86 W/Kg was calculated, which is well below the limit allowed for medical applications. A maximum temperature variation of 2.2 degrees C was also measured for an operating duration of 10 h, which is typical of a capsule journey inside the gastrointestinal tract. The proposed system represents a viable proposition for WPT in capsule endoscopy.