Related references
Note: Only part of the references are listed.Rapid evaluation of notch stress intensity factors using the peak stress method: Comparison of commercial finite element codes for a range of mesh patterns
G. Meneghetti et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens
S. M. J. Razavi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement
Ahmad Mansourian et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials
M. M. Mirsayar et al.
ENGINEERING FRACTURE MECHANICS (2018)
Fracture analysis of dissimilar Al-Al friction stir welded joints under tensile/shear loading
A. R. Torabi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
The role of first non-singular stress terms in mixed mode brittle fracture of V-notched components: an experimental study
M. Dehghany et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents
M. R. M. Aliha et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
The influence of natural and synthetic fibers on low temperature mixed mode I plus II fracture behavior of warm mix asphalt (WMA) materials
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2017)
On the low temperature mixed mode fracture analysis of asphalt binder - Theories and experiments
M. M. Mirsayar
ENGINEERING FRACTURE MECHANICS (2017)
State of the art of corner point singularities under in-plane and out-of-plane loading
Les P. Pook et al.
ENGINEERING FRACTURE MECHANICS (2017)
Mixed Mode I/II Fracture Investigation of Perspex Based on the Averaged Strain Energy Density Criterion
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2017)
Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation
A. Bahmani et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
On the applicability of ASED criterion for predicting mixed mode I plus II fracture toughness results of a rock material
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
Mixed Mode I/II Fracture Investigation of Perspex Based on the Averaged Strain Energy Density Criterion
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2017)
Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The Influence of Specimen Type on Tensile Fracture Toughness of Rock Materials
Mohammad Reza Mohammad Aliha et al.
PURE AND APPLIED GEOPHYSICS (2017)
Strain-based criteria for mixed-mode fracture of polycrystalline graphite
M. M. Mirsayar et al.
ENGINEERING FRACTURE MECHANICS (2016)
Mixed mode fracture toughness testing of PMMA with different three-point bend type specimens
M. R. M. Aliha et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes
M. Ameri et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Rapid finite element evaluation of the averaged strain energy density of mixed-mode (I plus II) crack tip fields including the T-stress contribution
A. Campagnolo et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Coupled fracture modes of discs and plates under anti-plane loading and a disc under in-plane shear loading
L. P. Pook et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
A novel test specimen for investigating the mixed mode I plus III fracture toughness of hot mix asphalt composites - Experimental and theoretical study
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Elastic-Plastic Fracture Analysis of Notched Al 7075-T6 Plates by Means of the Local Energy Combined with the Equivalent Material Concept
A. R. Torabi et al.
PHYSICAL MESOMECHANICS (2016)
Fracture Assessment of Polymethyl Methacrylate Using Sharp Notched Disc Bend Specimens under Mixed Mode I plus III Loading
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2016)
Mixed mode I/II crack initiation from U-notches in Al 7075-T6 thin plates by large-scale yielding regime
A. R. Torabi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Cyclic plasticity in three-dimensional notched components under in-phase multiaxial loading at R =-1
A. Campagnolo et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Elastic-Plastic Fracture Analysis of Notched Al 7075-T6 Plates by Means of the Local Energy Combined with the Equivalent Material Concept
A. R. Torabi et al.
PHYSICAL MESOMECHANICS (2016)
Fracture Assessment of Polymethyl Methacrylate Using Sharp Notched Disc Bend Specimens under Mixed Mode I plus III Loading
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2016)
Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Numerical analysis of a new mixed mode I/III fracture test specimen
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2015)
Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading
A. R. Torabi et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2015)
Determination of mode III fracture toughness for different materials using a new designed test configuration
M. R. M. Aliha et al.
MATERIALS & DESIGN (2015)
Fracture toughness evaluation of bituminous binders at low temperatures
M. Bueno et al.
MATERIALS AND STRUCTURES (2015)
Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Numerical Analyses of a Cracked Straight-Through Flattened Brazilian Disk Specimen under Mixed-Mode Loading
M. R. M. Aliha et al.
JOURNAL OF ENGINEERING MECHANICS (2014)
Fracture failure of asphalt binder in mixed mode (Modes I and II) by using phase-field model
Yue Hou et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2014)
The effects of thickness and Poisson's ratio on 3D mixed-mode fracture
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2013)
Using notched semi circular bending fatigue test to characterize fracture resistance of asphalt mixtures
Baoshan Huang et al.
ENGINEERING FRACTURE MECHANICS (2013)
Two-parameter fracture analysis of SCB rock specimen under mixed mode loading
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2013)
Experimental and numerical investigation of fracture mechanics of bitumen beams
O. Portillo et al.
ENGINEERING FRACTURE MECHANICS (2013)
Three-dimensional stress states at crack tip induced by shear and anti-plane loading
A. Kotousov et al.
ENGINEERING FRACTURE MECHANICS (2013)
Multiparametric full-field representations of the in-plane stress fields ahead of cracked components under mixed mode loading
F. Berto et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
An effective means for evaluating mixed-mode I/III stress intensity factors using single-edge notch beam specimen
Babak Ahmadi-Moghadam et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2013)
Mixed mode fracture resistance of asphalt concrete mixtures
M. Ameni et al.
ENGINEERING FRACTURE MECHANICS (2012)
Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading
F. Berto et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
An improved semi-circular bend specimen for investigating mixed mode brittle fracture
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2011)
On the use of an anti-symmetric four-point bend specimen for mode II fracture experiments
M. R. Ayatollahi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)
An over-deterministic method for calculation of coefficients of crack tip asymptotic field from finite element analysis
M. R. Ayatollahi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2011)
Fracture Analysis of Some Ceramics Under Mixed Mode Loading
Majid Reza Ayatollahi et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)
Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2010)
Using Semi Circular Bending Test to Evaluate Low Temperature Fracture Resistance for Asphalt Concrete
X-J Li et al.
EXPERIMENTAL MECHANICS (2010)
Geometry effects on fracture behaviour of polymethyl methacrylate
M. R. M. Aliha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Analysis of a new specimen for mixed mode fracture tests on brittle materials
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2009)
Fracture of V-notched specimens under mixed mode (I plus II) loading in brittle materials
F. J. Gomez et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
Mixed mode fracture in soda lime glass analyzed by using the generalized MTS criterion
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
Micromechanical fracture modeling of asphalt concrete using a single-edge notched beam test
H. Kim et al.
MATERIALS AND STRUCTURES (2009)
On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2008)
The theory of critical distances to predict static strength of notched brittle components subjected to mixed-mode loading
L. Susmel et al.
ENGINEERING FRACTURE MECHANICS (2008)
On mixed-mode I/II crack growth in dental resin materials
M. R. M. Aliha et al.
SCRIPTA MATERIALIA (2008)
A comparison between beam and semi-circular bending fracture tests for asphalt
Ignacio Artamendi et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2006)
The cohesive zone model: advantages, limitations and challenges
M Elices et al.
ENGINEERING FRACTURE MECHANICS (2002)
Indirect estimation of critical frontal process-zone size using a single-edge V-notched-beam technique
H Awaji et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2001)
The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading
DJ Smith et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)