Related references
Note: Only part of the references are listed.CO2-equivalent emissions from European passenger vehicles in the years 1995-2015 based on real-world use: Assessing the climate benefit of the European diesel boom
Eckard Helmers et al.
ATMOSPHERIC ENVIRONMENT (2019)
Effect of NiO nanoparticles on performance and emission characteristics at various injection timings using biodiesel-diesel blends
C. Srinidhi et al.
FUEL (2019)
Study on isobutanol and Calophyllum inophyllum biodiesel as a partial replacement in CI engine applications
B. Ashok et al.
FUEL (2019)
Improvement of engine performance and emissions by biomass oil filter in diesel engine
Xiaohui Chen et al.
FUEL (2019)
Emission and injection characteristics of corn biodiesel blends in diesel engine
S. Manigandan et al.
FUEL (2019)
An overview on the light alcohol fuels in diesel engines
Yahya Celebi et al.
FUEL (2019)
An overview of MULTIMOORA for multi-criteria decision-making: Theory, developments, applications, and challenges
Arian Hafezalkotob et al.
INFORMATION FUSION (2019)
Emission and engine performance analysis of a diesel engine using hydrogen enriched pomegranate seed oil biodiesel
Gokhan Tuccar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Intake air strategy for low HC and CO emissions in dual-fuel (CNG-diesel) premixed charge compression ignition engine
Euijoon Shim et al.
APPLIED ENERGY (2018)
Sustainable third-party reverse logistics provider evaluation and selection using fuzzy SWARA and developed fuzzy COPRAS in the presence of risk criteria
Navid Zarbakhshnia et al.
APPLIED SOFT COMPUTING (2018)
Pharmacological therapy selection of type 2 diabetes based on the SWARA and modified MULTIMOORA methods under a fuzzy environment
M. Eghbali-Zarch et al.
ARTIFICIAL INTELLIGENCE IN MEDICINE (2018)
A novel integrated decision-making approach for the evaluation and selection of renewable energy technologies
Morteza Yazdani et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2018)
Performance, combustion and emission characteristics of diesel engine fuelled with papaya and watermelon seed oil bio-diesel/diesel blends
M. A. Asokan et al.
ENERGY (2018)
Exergoeconomic analysis of a DI diesel engine fueled with diesel/biodiesel (B5) emulsions containing aqueous nano cerium oxide
Mortaza Aghbashlo et al.
ENERGY (2018)
An investigation of the efficiency of using O2 and H2 (hydrooxile gas-HHO) gas additives in a ci engine operating on diesel fuel and biodiesel
Alfredas Rimkus et al.
ENERGY (2018)
Evaluation of renewable power sources using a fuzzy MCDM based on cumulative prospect theory: A case in China
Yunna Wu et al.
ENERGY (2018)
Biodiesel production from castor oil in Egypt: Process optimisation, kinetic study, diesel engine performance and exhaust emissions analysis
Omar Aboelazayem et al.
ENERGY (2018)
Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends
Jiaqiang E et al.
ENERGY (2018)
Experimental investigation of unmodified diesel engine performance, combustion and emission with multipurpose additive along with water-in-diesel emulsion fuel
R. Vigneswaran et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Droplet combustion studies of nitromethane and its blends
Anirudha Ambekar et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)
Performance and combustion characteristics of a compression ignition engine running on diesel-biodiesel-ethanol (DBE) blends - Part 2: Optimization of injection timing
Andrew David Mendes Guedes et al.
FUEL (2018)
Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels
H. G. How et al.
FUEL (2018)
Study on co-combustion of diesel fuel with oxygenated alcohols in a compression ignition dual-fuel engine
Arkadiusz Jamrozik et al.
FUEL (2018)
Role of global fuel-air equivalence ratio and preheating on the behaviour of a biogas driven dual fuel diesel engine
Achinta Sarkar et al.
FUEL (2018)
Computational optimization of the combustion system of a heavy duty direct injection diesel engine operating with dimethyl-ether
Jesus Benajes et al.
FUEL (2018)
Parametric study and optimization of the main engine calibration parameters and compression ratio of a methane-diesel dual fuel engine
Giacomo Belgiorno et al.
FUEL (2018)
High efficiency ethanol-diesel dual-fuel combustion: A comparison against conventional diesel combustion from low to full engine load
Vinicius B. Pedrozo et al.
FUEL (2018)
A comparative analysis of n-butanol/diesel and 1-pentanol/diesel blends in a compression ignition engine
Alpaslan Atmanli et al.
FUEL (2018)
The influence of motivations and barriers in the benefits. An empirical study of EMAS certified business in Spain
Jose Alvarez-Garcia et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Experimental investigation of physicochemical properties of diesel, biodiesel and TBK-biodiesel fuels and combustion and emission analysis in CI internal combustion engine
Gyorgy Szabados et al.
RENEWABLE ENERGY (2018)
Risk evaluation using a novel hybrid method based on FMEA, extended MULTIMOORA, and AHP methods under fuzzy environment
Reza Fattahi et al.
SAFETY SCIENCE (2018)
A Novel Multicriteria Approach - Rough Step-Wise Weight Assessment Ratio Analysis Method (R-SWARA) and Its Application in Logistics
Edmundas Kazimieras Zavadskas et al.
STUDIES IN INFORMATICS AND CONTROL (2018)
Effect of the engine calibration parameters on gasoline partially premixed combustion performance and emissions compared to conventional diesel combustion in a light-duty Euro 6 engine
Giacomo Belgiorno et al.
APPLIED ENERGY (2018)
Intensification of the combustion process in a gasoline engine by adding a hydrogen-containing gas
Yuriy Gutarevych et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Exergy Analysis of Different Blends of Hydrogen and Octane for Combustion Conditions of Internal Combustion Engine
Tansel Koyun
JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS (2018)
Internal combustion engine exhaust gas analysis
Nick Collings et al.
INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2017)
Performance, combustion and emission characteristics of diesel engine fuelled with waste cooking oil bio-diesel/diesel blends with additives
S. Senthur Prabu et al.
ENERGY (2017)
Combustion, performance and emissions of a diesel power generator fueled with biodiesel-kerosene and biodiesel-kerosene-diesel blends
Hasan Bayindir et al.
ENERGY (2017)
Combustion performance and pollutant emissions analysis using diesel/gasoline/iso-butanol blends in a diesel engine
Mingrui Wei et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Model for residential house element and material selection by neutrosophic MULTIMOORA method
Edmundas Kazimieras Zavadskas et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2017)
Effects of injection timing on combustion and emissions in a diesel engine fueled with 2,5-dimethylfuran-diesel blends
Mingrui Wei et al.
FUEL (2017)
Sustainable third-party reverse logistic provider selection with fuzzy SWARA and fuzzy MOORA in plastic industry
Reza Kiani Mavi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Selection of biomass thermochemical conversion technology in the Netherlands: A best worst method approach
Geerten van de Kaa et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Potential and challenges for large-scale application of biodiesel in automotive sector
Avinash Kumar Agarwal et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)
Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) in the environment - A review
Benjamin A. Musa Bandowe et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2017)
Semi-physical models to assess the influence of CI engine calibration parameters on NOx and soot emissions
Xavier Tauzia et al.
APPLIED ENERGY (2017)
Effects on performances, emissions and particle size distributions of a dual fuel (methane-diesel) light-duty engine varying the compression ratio
G. Di Blasio et al.
APPLIED ENERGY (2017)
Using fuzzy multiple criteria decision making approaches for evaluating energy saving technologies and solutions in five star hotels: A new hierarchical framework
Abbas Mardani et al.
ENERGY (2016)
An assessment of the dual-mode reactivity controlled compression ignition/conventional diesel combustion capabilities in a EURO VI medium-duty diesel engine fueled with an intermediate ethanol-gasoline blend and biodiesel
Jesus Benajes et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
MODEL FOR RAPID ASSESSMENT OF VULNERABILITY OF OFFICE BUILDINGS TO BLAST USING SWARA AND SMART METHODS (A CASE STUDY OF SWISS RE TOWER)
Jalal Nakhaei et al.
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2016)
AN INTEGRATED FUZZY ANP-QFD APPROACH FOR GREEN BUILDING ASSESSMENT
Joshua Ignatius et al.
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2016)
Sustainable Assessment of Aerosol Pollution Decrease Applying Multiple Attribute Decision-Making Methods
Audrius Cereska et al.
SUSTAINABILITY (2016)
The Framework for the Selection of Personnel Based on the SWARA and ARAS Methods Under Uncertainties
Darjan Karabasevic et al.
INFORMATICA (2016)
RANKING OF COMPANIES ACCORDING TO THE INDICATORS OF CORPORATE SOCIAL RESPONSIBILITY BASED ON SWARA AND ARAS METHODS
Darjan Karabasevic et al.
SERBIAN JOURNAL OF MANAGEMENT (2016)
Experimental analysis of the influence of urea injection upon NOx emissions in internal combustion engines fueled with biodiesels
Kazem Bashirnezhad et al.
JOURNAL OF THE ENERGY INSTITUTE (2016)
Glow-plug-assisted combustion of nitromethane sprays in a constant volume chamber
Anirudha Ambekar et al.
APPLIED THERMAL ENGINEERING (2015)
Improving exergetic and sustainability parameters of a DI diesel engine using polymer waste dissolved in biodiesel as a novel diesel additive
Mortaza Aghbashlo et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Comprehensive MULTIMOORA method with target-based attributes and integrated significant coefficients for materials selection in biomedical applications
Arian Hafezalkotob et al.
MATERIALS & DESIGN (2015)
Investment prioritizing in high tech industries based on SWARA-COPRAS approach
Sarfaraz Hashemkhani Zolfani et al.
TECHNOLOGICAL AND ECONOMIC DEVELOPMENT OF ECONOMY (2014)
A Survey on Development and Applications of the Multi-criteria Decision Making Method MULTIMOORA
Tomas Balezentis et al.
JOURNAL OF MULTI-CRITERIA DECISION ANALYSIS (2014)
Characterization of nitromethane emission from automotive exhaust
Kanako Sekimoto et al.
ATMOSPHERIC ENVIRONMENT (2013)
SELECTING THE OPTIMAL RENEWABLE ENERGY USING MULTI CRITERIA DECISION MAKING
Abdolreza Yazdani-Chamzini et al.
JOURNAL OF BUSINESS ECONOMICS AND MANAGEMENT (2013)
COMPARATIVE INVESTIGATIONS INTO ENERGETIC AND ECOLOGICAL PARAMETERS OF CAMELINA-BASED BIOFUEL USED IN THE 1Z DIESEL ENGINE
Sergejus Lebedevas et al.
TRANSPORT (2012)
Detailed analysis of diesel vehicle exhaust emissions: Nitrogen oxides, hydrocarbons and particulate size distributions
Hiroyuki Yamada et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Particulate emissions from biodiesel vs diesel fuelled compression ignition engine
Avinash Kumar Agarwal et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Multimoora Optimization Used to Decide on a Bank Loan to Buy Property
Willem Karel M. Brauers et al.
TECHNOLOGICAL AND ECONOMIC DEVELOPMENT OF ECONOMY (2011)
SELECTION OF RATIONAL DISPUTE RESOLUTION METHOD BY APPLYING NEW STEP-WISE WEIGHT ASSESSMENT RATIO ANALYSIS (SWARA)
Violeta Kersuliene et al.
JOURNAL OF BUSINESS ECONOMICS AND MANAGEMENT (2010)
PROJECT MANAGEMENT BY MULTIMOORA AS AN INSTRUMENT FOR TRANSITION ECONOMIES
Willem Karel M. Brauers et al.
TECHNOLOGICAL AND ECONOMIC DEVELOPMENT OF ECONOMY (2010)