Related references
Note: Only part of the references are listed.p-Type CuI Islands on TiO2 Electron Transport Layer for a Highly Efficient Planar-Perovskite Solar Cell with Negligible Hysteresis
Mahdi Malekshahi Byranvand et al.
ADVANCED ENERGY MATERIALS (2018)
Improving the efficiency and environmental stability of inverted planar perovskite solar cells via silver-doped nickel oxide hole-transporting layer
Ying Wei et al.
APPLIED SURFACE SCIENCE (2018)
Electrical characterization and comparison of CIGS solar cells made with different structures and fabrication techniques
Rebekah L. Garris et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Solution-Processed Cu(In, Ga)(S, Se)2 Nanocrystal as Inorganic Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells
Lu Xu et al.
NANOSCALE RESEARCH LETTERS (2017)
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Hairen Tan et al.
SCIENCE (2017)
Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%
Neha Arora et al.
SCIENCE (2017)
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Wei Chen et al.
ADVANCED ENERGY MATERIALS (2017)
Improving the stability of the perovskite solar cells by V2O5 modified transport layer film
Zhiyong Liu et al.
RSC ADVANCES (2017)
Solution processed double-decked V2Ox/PEDOT: PSS film serves as the hole transport layer of an inverted planar perovskite solar cell with high performance
Zhiyong Liu et al.
RSC ADVANCES (2017)
Solution-processed SnO2 thin film for a hysteresis-free planar perovskite solar cell with a power conversion efficiency of 19.2%
Kwang-Ho Jung et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Enhanced physical properties of pulsed laser deposited NiO films via annealing and lithium doping for improving perovskite solar cell efficiency
Zhiwen Qiu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Solution-Processed Cu(In, Ga)(S, Se)2 Nanocrystal as Inorganic Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells
Lu Xu et al.
NANOSCALE RESEARCH LETTERS (2017)
Room-Temperature and Solution-Processable Cu-Doped Nickel Oxide Nanoparticles for Efficient Hole-Transport Layers of Flexible Large-Area Perovskite Solar Cells
Qiqi He et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Copper(I) Thiocyanate (CuSCN) Hole-Transport Layers Processed from Aqueous Precursor Solutions and Their Application in Thin-Film Transistors and Highly Efficient Organic and Organometal Halide Perovskite Solar Cells
Nilushi Wijeyasinghe et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Metal Acetylacetonate Series in Interface Engineering for Full Low-Temperature-Processed, High-Performance, and Stable Planar Perovskite Solar Cells with Conversion Efficiency over 16% on 1 cm2 Scale
Wei Chen et al.
ADVANCED MATERIALS (2017)
Effect of Energy Alignment, Electron Mobility, and Film Morphology of Perylene Diimide Based Polymers as Electron Transport Layer on the Performance of Perovskite Solar Cells
Qiang Guo et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Lei Meng et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
Solution-Processed CuS NPs as an Inorganic Hole-Selective Contact Material for Inverted Planar Perovskite Solar Cells
Haixia Rao et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Molecular-ink route to 13.0% efficient low-bandgap CuIn(S, Se)(2) and 14.7% efficient Cu(In, Ga)(S, Se)(2) solar cells
A. R. Uhl et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
High efficiency solution-processed thin-film Cu(In,Ga)(Se, S)2 solar cells
Ting Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
11.3% efficiency Cu(In,Ga)(S,Se)2 thin film solar cells via drop-on-demand inkjet printing
Xianzhong Lin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Hobeom Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Solution processed inorganic V2O x as interfacial function materials for inverted planar-heterojunction perovskite solar cells with enhanced efficiency
Haitao Peng et al.
NANO RESEARCH (2016)
p-i-n/n-i-p type planar hybrid structure of highly efficient perovskite solar cells towards improved air stability: synthetic strategies and the role of p-type hole transport layer (HTL) and n-type electron transport layer (ETL) metal oxides
Sawanta S. Mali et al.
NANOSCALE (2016)
An ultra-thin, un-doped NiO hole transporting layer of highly efficient (16.4%) organic-inorganic hybrid perovskite solar cells
Seongrok Seo et al.
NANOSCALE (2016)
Nano-structured CuO-Cu2O Complex Thin Film for Application in CH3NH3PbI3 Perovskite Solar Cells
Lung-Chieh Chen et al.
NANOSCALE RESEARCH LETTERS (2016)
p-type Li, Cu-codoped NiOx hole-transporting layer for efficient planar perovskite solar cells
Ming-Hua Liu et al.
OPTICS EXPRESS (2016)
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Michael Saliba et al.
SCIENCE (2016)
Efficient inverted-type perovskite solar cells using UV-ozone treated MoOx and WOx as hole transporting layers
Zong-Liang Tseng et al.
SOLAR ENERGY (2016)
Cu2O particles mediated growth of perovskite for high efficient hole-transporting-layer free solar cells in ambient conditions
Lan Liu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Eliminating fine-grained layers in Cu(In,Ga)(S,Se)2 thin films for solution-processed high efficiency solar cells
Dandan Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Nano-structured CuO-Cu2O Complex Thin Film for Application in CH3NH3PbI3 Perovskite Solar Cells
Lung-Chieh Chen et al.
NANOSCALE RESEARCH LETTERS (2016)
Low temperature processed, high-performance and stable NiOx based inverted planar perovskite solar cells via a poly(2-ethyl-2-oxazoline) nanodots cathode electron-extraction layer
Wei Chen et al.
MATERIALS TODAY ENERGY (2016)
Kesterite Cu2ZnSnS4 as a Low-Cost Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells
Qiliang Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Colloidal CuInS2 Quantum Dots as Inorganic Hole-Transporting Material in Perovskite Solar Cells
Mei Lv et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Improving the Extraction of Photogenerated Electrons with SnO2 Nanocolloids for Efficient Planar Perovskite Solar Cells
Hua-Shang Rao et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells
Wei Chen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Senyun Ye et al.
NANO LETTERS (2015)
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Wei Chen et al.
SCIENCE (2015)
Solution-Processed Cu2O and CuO as Hole Transport Materials for Efficient Perovskite Solar Cells
Chuantian Zuo et al.
SMALL (2015)
High-Performance Semitransparent Perovskite Solar Cells with 10% Power Conversion Efficiency and 25% Average Visible Transmittance Based on Transparent CuSCN as the Hole-Transporting Material
Jae Woong Jung et al.
ADVANCED ENERGY MATERIALS (2015)
Solution-deposited pure selenide CIGSe solar cells from elemental Cu, In, Ga, and Se
Dandan Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
High efficiency hysteresis-less inverted planar heterojunction perovskite solar cells with a solution-derived NiOx hole contact layer
Xingtian Yin et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Hole-conductor-free planar perovskite solar cells with 16.0% efficiency
Yunlong Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Solution-processed inorganic copper(I) thiocyanate (CuSCN) hole transporting layers for efficient p-i-n perovskite solar cells
K. Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
An Inorganic Hole Conductor for Organo-Lead Halide Perovskite Solar Cells. Improved Hole Conductivity with Copper Iodide
Jeffrey A. Christians et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Solution processed high band-gap CuInGaS2 thin film for solar cell applications
Se Jin Park et al.
PROGRESS IN PHOTOVOLTAICS (2014)
Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency
Peng Qin et al.
NATURE COMMUNICATIONS (2014)
p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Kuo-Chin Wang et al.
SCIENTIFIC REPORTS (2014)
CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2013)
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
James M. Ball et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Intensity and wavelength dependence of bimolecular recombination in P3HT:PCBM solar cells: A white-light biased external quantum efficiency study
Sarah R. Cowan et al.
JOURNAL OF APPLIED PHYSICS (2013)
Wurtzite CuInS2 and CuInxGa1-xS2 nanoribbons: synthesis, optical and photoelectrical properties
Qiang Li et al.
NANOSCALE (2013)
Efficient planar heterojunction perovskite solar cells by vapour deposition
Mingzhen Liu et al.
NATURE (2013)
Solution-processed Cu(In,Ga)(S,Se)(2) absorber yielding a 15.2% efficient solar cell
Teodor K. Todorov et al.
PROGRESS IN PHOTOVOLTAICS (2013)
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3
Guichuan Xing et al.
SCIENCE (2013)
A Novel and Versatile Strategy to Prepare Metal-Organic Molecular Precursor Solutions and Its Application in Cu(In,Ga)(S,Se)2 Solar Cells
Gang Wang et al.
CHEMISTRY OF MATERIALS (2012)
Mesoscopic CH3NH3PbI3/TiO2 Heterojunction Solar Cells
Lioz Etgar et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Structural analysis of CIGS film prepared by chemical spray deposition
Dong-Yeup Lee et al.
CURRENT APPLIED PHYSICS (2011)
A High-Efficiency Solution-Deposited Thin-Film Photovoltaic Device
David B. Mitzi et al.
ADVANCED MATERIALS (2008)
Synthesis of CuInS2, CuInSe2, and Cu(InxGa1-x)Se2 (CIGS) Nanocrystal Inks for Printable Photovoltaics
Matthew G. Panthani et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Band-gap grading in Cu(In,Ga)Se2 solar cells
M Gloeckler et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2005)
A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors
T Dullweber et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2001)