Related references
Note: Only part of the references are listed.Improved fracture toughness of epoxy resin reinforced with polyamide 6/graphene oxide nanocomposites prepared via in situ polymerization
Xiaoran Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Development and application of novel technique for characterising the cure shrinkage of epoxy resins
Ross F. Minty et al.
POLYMER TESTING (2019)
A technical review on epoxy-clay nanocomposites: Structure, properties, and their applications in fiber reinforced composites
Omid Zabihi et al.
COMPOSITES PART B-ENGINEERING (2018)
Development of anti-corrosive paint with improved toughness using carboxyl terminated modified epoxy resin
Rashmi David et al.
PROGRESS IN ORGANIC COATINGS (2018)
Silica Nanofibrous Membranes for the Separation of Heterogeneous Azeotropes
Eva Loccufier et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Curing kinetics and mechanical properties of epoxy based coatings: The influence of added solvent
Cai Yi et al.
PROGRESS IN ORGANIC COATINGS (2018)
Curing rate effects on the toughness of epoxy polymers
D. Incerti et al.
POLYMER (2018)
Design and synthesis of biobased epoxy thermosets from biorenewable resources
Camille Francois et al.
COMPTES RENDUS CHIMIE (2017)
Influence of temperature on the curing of an epoxy adhesive and its influence on bond behaviour of NSM-CFRP systems
Andrea Benedetti et al.
COMPOSITES PART B-ENGINEERING (2016)
Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide
B. Ramezanzadeh et al.
CORROSION SCIENCE (2016)
Biodegradable bioepoxy resins based on epoxidized natural oil (cottonseed & algae) cured with citric and tartaric acids through solution polymerization: A renewable approach
Manisha Pawar et al.
INDUSTRIAL CROPS AND PRODUCTS (2016)
A new biobased plasticizer for poly(vinyl chloride) based on epoxidized cottonseed oil
Alfredo Carbonell-Verdu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Plasticizing effect of biobased epoxidized fatty acid esters on mechanical and thermal properties of poly(lactic acid)
J. M. Ferri et al.
JOURNAL OF MATERIALS SCIENCE (2016)
The strength of multi-scale modeling to unveil the complexity of radical polymerization
Dagmar R. D'hooge et al.
PROGRESS IN POLYMER SCIENCE (2016)
An iterative approach for isothermal curing kinetics modelling of an epoxy resin system
Mehdi Javdanitehran et al.
THERMOCHIMICA ACTA (2016)
New environmentally friendly composite laminates with epoxidized linseed oil (ELO) and slate fiber fabrics
M. D. Samper et al.
COMPOSITES PART B-ENGINEERING (2015)
Development of environmentally friendly composite matrices from epoxidized cottonseed oil
A. Carbonell-Verdu et al.
EUROPEAN POLYMER JOURNAL (2015)
Synthesis and application of epoxy resins: A review
Fan-Long Jin et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)
Properties of composite laminates based on basalt fibers with epoxidized vegetable oils
M. D. Samper et al.
MATERIALS & DESIGN (2015)
Effect of silane coupling agents on basalt fiber-epoxidized vegetable oil matrix composite materials analyzed by the single fiber fragmentation technique
M. D. Samper et al.
POLYMER COMPOSITES (2015)
Bisphenol A - Sources, toxicity and biotransformation
Jaromir Michalowicz
ENVIRONMENTAL TOXICOLOGY AND PHARMACOLOGY (2014)
ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations
Sergey Vyazovkin et al.
THERMOCHIMICA ACTA (2014)
Fracture behavior of a self-healing, toughened epoxy adhesive
Henghua Jin et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Characterization of the curing process of vinyl plastisols with epoxidized linseed oil as a natural-based plasticizer
O. Fenollar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Thermal and Mechanical Characterization of Epoxy Resins (ELO and ESO) Cured with Anhydrides
M. D. Samper et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2012)
Properties of Biobased Epoxy Resins from Epoxidized Soybean Oil (ESBO) Cured with Maleic Anhydride (MA)
J. M. Espana et al.
JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY (2012)
Use of eco-friendly epoxy resins from renewable resources as potential substitutes of petrochemical epoxy resins for ambient cured composites with flax reinforcements
D. Bertomeu et al.
POLYMER COMPOSITES (2012)
A Fully Biobased Epoxy Resin from Vegetable Oils: From the Synthesis of the Precursors by Thiol-ene Reaction to the Study of the Final Material
M. Stemmelen et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2011)
Fracture and fatigue response of a self-healing epoxy adhesive
Henghua Jin et al.
POLYMER (2011)
ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data
Sergey Vyazovkin et al.
THERMOCHIMICA ACTA (2011)
Effect of the epoxidized linseed oil concentration as natural plasticizer in vinyl plastisols
O. Fenollar et al.
JOURNAL OF MATERIALS SCIENCE (2010)
A simple kinetic method for the determination of the reaction model from non-isothermal experiments
Jordi Farjas et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2010)
Thermosetting (bio)materials derived from renewable resources: A critical review
J. -M. Raquez et al.
PROGRESS IN POLYMER SCIENCE (2010)
Effect of chemical structure on the water sorption of amine-cured epoxy resins
Liang Li et al.
CORROSION SCIENCE (2009)
Plant oil renewable resources as green alternatives in polymer science
Michael A. R. Meier et al.
CHEMICAL SOCIETY REVIEWS (2007)
Isoconversional kinetic analysis of thermally stimulated processes in polymers
Sergey Vyazovkin et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2006)
Poly(ether ether ketone) with pendent methyl groups as a toughening agent for amine cured DGEBA epoxy resin
Bejoy Francis et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Homopolymerization of epoxy monomers initiated by 4-(dimethylamino)pyridine
IE Dell'Erba et al.
POLYMER ENGINEERING AND SCIENCE (2006)
A kinetic study of the acceleration effect of substituted benzyl alcohols on the cationic photopolymerization rate of epoxidized natural oils
RA Ortiz et al.
POLYMER (2005)
Effect of biodegradable epoxidized castor oil on physicochemical and mechanical properties of epoxy resins
SJ Park et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2004)
The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods
MJ Starink
THERMOCHIMICA ACTA (2003)
Effect of polymeric structure on the corrosion protection of epoxy coatings
SY Zhang et al.
CORROSION SCIENCE (2002)
Development and application of triglyceride-based polymers and composites
SN Khot et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2001)
The accuracy of Senum and Yang's approximations to the Arrhenius integral
LA Perez-Maqueda et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2000)