Related references
Note: Only part of the references are listed.Microstructure and porosity evolution during sintering of Ni-Mn-Ga wires printed from inks containing elemental powders
Shannon L. Taylor et al.
INTERMETALLICS (2019)
Effect of carbon addition on the microstructure and mechanical properties of CoCrFeNi high entropy alloy
Huang TianDang et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)
NiTi-Nb micro-trusses fabricated via extrusion-based 3D-printing of powders and transient-liquid-phase sintering
Shannon L. Taylor et al.
ACTA BIOMATERIALIA (2018)
Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders
Shannon L. Taylor et al.
ACTA MATERIALIA (2018)
Hydrogen embrittlement of the equi-molar FeNiCoCr alloy
Kelly E. Nygren et al.
ACTA MATERIALIA (2018)
Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W-Cu Composites
Micha Calvo et al.
ADVANCED ENGINEERING MATERIALS (2018)
Elastic moduli and thermal expansion coefficients of medium-entropy subsystems of the CrMnFeCoNi high-entropy alloy
G. Laplanche et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Printability and microstructure of the CoCrFeMnNi high-entropy alloy fabricated by laser powder bed fusion
A. Piglione et al.
MATERIALS LETTERS (2018)
Three-Dimensional High-Entropy Alloy-Polymer Composite Nanolattices That Overcome the Strength-Recoverability Trade-off
Xuan Zhang et al.
NANO LETTERS (2018)
Additive Manufacturing of Advanced Multi-Component Alloys: Bulk Metallic Glasses and High Entropy Alloys
Xiaopeng Li
ADVANCED ENGINEERING MATERIALS (2018)
Iron and Nickel Cellular Structures by Sintering of 3D-Printed Oxide or Metallic Particle Inks
Shannon L. Taylor et al.
ADVANCED ENGINEERING MATERIALS (2017)
A facile method for producing porous parts with complex geometries from ferromagnetic Ni-Mn-Ga shape memory alloys
M. P. Caputo et al.
MATERIALS LETTERS (2017)
Strain-rate effect upon the tensile behavior of CoCrFeNi high-entropy alloys
Wenyi Huo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - Towards rapid alloy screening and design
Christian Haase et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High-entropy alloy CoCrFeMnNi produced by powder metallurgy
Nadine Eissmann et al.
POWDER METALLURGY (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Remarkable strength of CoCrFeNi high-entropy alloy wires at cryogenic and elevated temperatures
Wenyi Huo et al.
SCRIPTA MATERIALIA (2017)
Tension/compression asymmetry in additive manufactured face centered cubic high entropy alloy
Jithin Joseph et al.
SCRIPTA MATERIALIA (2017)
Deformation Behavior of Al0.25CoCrFeNi High-Entropy Alloy after Recrystallization
Jinxiong Hou et al.
METALS (2017)
Characterization of 100Cr6 lattice structures produced by robocasting
M. Yetna N'Jock et al.
MATERIALS & DESIGN (2017)
Hydrogen enhances strength and ductility of an equiatomic high-entropy alloy
Hong Luo et al.
SCIENTIFIC REPORTS (2017)
A critical review of high entropy alloys and related concepts
D. B. Miracle et al.
ACTA MATERIALIA (2017)
A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing
J. J. S. Dilip et al.
DEFENCE TECHNOLOGY (2017)
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Daeho Hong et al.
ACTA BIOMATERIALIA (2016)
Additive Manufacturing of High-Entropy Alloys by Laser Processing
V. Ocelik et al.
JOM (2016)
Structure of some CoCrFeNi and CoCrFeNiPd multicomponent HEA alloys by diffraction techniques
U. Dahlborg et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting
Hiroshi Shiratori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process
Y. Tang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
True Colors of Oceanography Guidelines for Effective and Accurate Colormap Selection
Kristen M. Thyng et al.
OCEANOGRAPHY (2016)
Laser-assisted direct ink writing of planar and 3D metal architectures
Mark A. Skylar-Scott et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Metallic Architectures from 3D-Printed Powder-Based Liquid Inks
Adam E. Jakus et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping
I. Kunce et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials
Tadashi Fujieda et al.
MATERIALS LETTERS (2015)
An exploration of binder jetting of copper
Yun Bai et al.
RAPID PROTOTYPING JOURNAL (2015)
The use of high-entropy alloys in additive manufacturing
Yevgeni Brif et al.
SCRIPTA MATERIALIA (2015)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
Products of carbothermic reduction of Fe-Cr-O and Fe-Cr-Ni-O systems
Yan-ling Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Structure and hydrogen storage properties of a high entropy ZrTiVCrFeNi alloy synthesized using Laser Engineered Net Shaping (LENS)
I. Kunce et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)
REDUCTION OF Fe AND Ni IN Fe-Ni-O SYSTEMS
Y. Zhang et al.
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY (2013)
The Materials Science beamline upgrade at the Swiss Light Source
P. R. Willmott et al.
JOURNAL OF SYNCHROTRON RADIATION (2013)
Printed Origami Structures
Bok Yeop Ahn et al.
ADVANCED MATERIALS (2010)
Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤2) high-entropy alloys
Hsuan-Ping Chou et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)
Synthesis and characterisation of nanostructured Ni-Co alloy Part 3: NiO and Co3O4 coformed reduction kinetics
E. A. Brocchi et al.
TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2009)
Chromites reduction reaction mechanisms in carbon-chromites composite agglomerates at 1773 K
Cyro Takano et al.
ISIJ INTERNATIONAL (2007)
Direct ink writing of 3D functional materials
Jennifer A. Lewis
ADVANCED FUNCTIONAL MATERIALS (2006)
Interconnect thermal expansion matching to solid oxide fuel cells
BC Church et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Oxide reduction and sintering of Fe-Cr alloy honeycombs
JH Nadler et al.
JOURNAL OF MATERIALS RESEARCH (2003)
Share Paper
