Fe-rich biomass derived char for microwave-assisted methane reforming with carbon dioxide

Microwave-assisted methane reforming with carbon dioxide was dealt with in this work, using a Fe-rich biomass-derived char by one-step preparation. The main factors on the reforming reaction and stability of this catalyst were evaluated, together with a series of characterization on the produced gas and the used char. The char obtained from biomass pyrolysis with Fe2O3 addition of 10% exhibited the best performance on dry reforming reaction. A target CH4 conversion of 95% over this char was realized at 800 degrees C. Moreover, H-2/CO ratio achieved with this char was prone to approach the stoichiometric value. Compared to CO2 conversion, CH4 conversion was more promoted with the increase of CO2/CH4 ratio. The variation of CO2/CH4 ratio also leaded to a noticeable changes on H-2. ratio. More importantly, the selected char presented a satisfied stability, evidenced by the total decrease of 4.8% for CH4 conversion and 3.1% for CO2 conversion in the test of 160 min. This was contributed to a depressed in-situ carbon consumption and a moderate deterioration of porous structure. Gaseous products obtained with the appropriate char in a long run had a syngas content of 88.79% and H-2/CO ratio of 0.92 on average. (C) 2018 Elsevier B.V. All rights reserved.