Related references
Note: Only part of the references are listed.Review of progresses on clinical applications of ion selective electrodes for electrolytic ion tests: from conventional ISEs to graphene-based ISEs
Rongguo Yan et al.
CHEMICAL SPECIATION AND BIOAVAILABILITY (2016)
All-Solid-State Reference Electrodes Based on Colloid-Imprinted Mesoporous Carbon and Their Application in Disposable Paper-based Potentiometric Sensing Devices
Jinbo Hu et al.
ANALYTICAL CHEMISTRY (2015)
All-Solid-State Potentiometric Sensors with a Multiwalled Carbon Nanotube Inner Transducing Layer for Anion Detection in Environmental Samples
Dajing Yuan et al.
ANALYTICAL CHEMISTRY (2015)
Novel Ion-to-Electron Transduction Principle for Solid-Contact ISEs
Elisa Hupa et al.
ELECTROANALYSIS (2015)
Improvement of the upper limit of the ISE Nernstian response by tuned galvanostatic polarization
Maria A. Peshkova et al.
ELECTROCHIMICA ACTA (2015)
Materials for the ionophore-based membranes for ion-selective electrodes: Problems and achievements (review paper)
I. A. Pechenkina et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2015)
Ionic Liquid Reference Electrodes With a Well-Controlled Co(II)/Co(III) Redox Buffer as Solid Contact
Xu U. Zou et al.
ELECTROANALYSIS (2015)
Polymeric plasticizer extends the lifetime of PVC-membrane ion-selective electrodes
Elsayed M. Zahran et al.
ANALYST (2014)
Instrument-Free Control of the Standard Potential of Potentiometric Solid-Contact Ion-Selective Electrodes by Short-Circuiting with a Conventional Reference Electrode
Ulriika Vanamo et al.
ANALYTICAL CHEMISTRY (2014)
Ion-Selective Electrodes with Colloid-Imprinted Mesoporous Carbon as Solid Contact
Jinbo Hu et al.
ANALYTICAL CHEMISTRY (2014)
Calibration-Free Ionophore-Based Ion-Selective Electrodes With a Co(II)/Co(III) Redox Couple-Based Solid Contact
Xu U. Zou et al.
ANALYTICAL CHEMISTRY (2014)
Routines and Challenges in Clinical Application of Electrochemical Ion-Sensors
Andrzej Lewenstam
ELECTROANALYSIS (2014)
Ionic liquid salt bridge - Current stage and perspectives: A mini review
Takashi Kakiuchi
ELECTROCHEMISTRY COMMUNICATIONS (2014)
Electrochemical control of the standard potential of solid-contact ion-selective electrodes having a conducting polymer as ion-to-electron transducer
Ulriika Vanamo et al.
ELECTROCHIMICA ACTA (2014)
Potentiometric Response from Ion-Selective Nanospheres with Voltage-Sensitive Dyes
Xiaojiang Xie et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Enhancing ion-selective polymeric membrane electrodes by instrumental control
Eric Bakker
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2014)
An analytical quality solid-state composite reference electrode
Zekra Mousavi et al.
ANALYST (2013)
Solid Contact Ion-Selective Electrodes with a Well-Controlled Co(II)/Co(III) Redox Buffer Layer
Xu U. Zou et al.
ANALYTICAL CHEMISTRY (2013)
Nernst-Planck-Poisson Model for the Description of Behaviour of Solid-Contact Ion-Selective Electrodes at Low Analyte Concentration
Jerzy J. Jasielec et al.
ELECTROANALYSIS (2013)
Solvent polymeric membrane ion-selective electrodes under galvanostatic control: Powerful tool for analysis of extremely diluted samples
Maria A. Peshkova et al.
ELECTROCHIMICA ACTA (2013)
All-solid-state potassium-selective electrode using graphene as the solid contact
Fenghua Li et al.
ANALYST (2012)
Electrochemical Sensors and Biosensors
Danielle W. Kimmel et al.
ANALYTICAL CHEMISTRY (2012)
Direct Ion Speciation Analysis with Ion-Selective Membranes Operated in a Sequential Potentiometric/Time Resolved Chronopotentiometric Sensing Mode
Majid Ghahraman Afshar et al.
ANALYTICAL CHEMISTRY (2012)
Ionic Liquid Salt Bridge with Low Solubility of Water and Stable Liquid Junction Potential Based on a Mixture of a Potential-Determining Salt and a Highly Hydrophobic Ionic Liquid
Limin Zhang et al.
ANALYTICAL CHEMISTRY (2012)
Advantages and Limitations of Reference Electrodes with an Ionic Liquid Junction and Three-Dimensionally Ordered Macroporous Carbon as Solid Contact
Tiantian Zhang et al.
ANALYTICAL CHEMISTRY (2012)
All-Solid-State Ion Selective and All-Solid-State Reference Electrodes
Agata Michalska
ELECTROANALYSIS (2012)
Opportunities and challenges of using ion-selective electrodes in environmental monitoring and wearable sensors
Claudio Zuliani et al.
ELECTROCHIMICA ACTA (2012)
Critical assessment of graphene as ion-to-electron transducer for all-solid-state potentiometric sensors
Ewa Jaworska et al.
TALANTA (2012)
Tuned galvanostatic polarization of solid-state lead-selective electrodes for lowering of the detection limit
Grzegorz Lisak et al.
ANALYTICA CHIMICA ACTA (2011)
Solid-state reference electrodes based on carbon nanotubes and polyacrylate membranes
F. Xavier Rius-Ruiz et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2011)
Potentiometric Strip Cell Based on Carbon Nanotubes as Transducer Layer: Toward Low-Cost Decentralized Measurements
F. Xavier Rius-Ruiz et al.
ANALYTICAL CHEMISTRY (2011)
Development of an all-solid-state potassium ion-selective electrode using graphene as the solid-contact transducer
Jianfeng Ping et al.
ELECTROCHEMISTRY COMMUNICATIONS (2011)
Nikolsky's ion exchange theory versus Baucke's dissociation mechanism of the glass electrode
Fritz Scholz
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2011)
Potentiometric Sensors Based on Fluorous Membranes Doped with Highly Selective Ionophores for Carbonate
Li D. Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Polyacrylate microspheres composite for all-solid-state reference electrodes
Anna Kisiel et al.
ANALYST (2010)
Highly Selective Detection of Silver in the Low ppt Range with Ion-Selective Electrodes Based on Ionophore-Doped Fluorous Membranes
Chun-Ze Lai et al.
ANALYTICAL CHEMISTRY (2010)
Effects of Architecture and Surface Chemistry of Three-Dimensionally Ordered Macroporous Carbon Solid Contacts on Performance of Ion-Selective Electrodes
Melissa A. Fierke et al.
ANALYTICAL CHEMISTRY (2010)
Microfabricated Reference Electrodes and their Biosensing Applications
M. Waleed Shinwari et al.
SENSORS (2010)
An all-solid-state reference electrode
W. Vonau et al.
SENSORS AND ACTUATORS B-CHEMICAL (2010)
Development of miniature all-solid-state potentiometric sensing system
Salzitsa Anastasova-Ivanova et al.
SENSORS AND ACTUATORS B-CHEMICAL (2010)
Ion-selective electrodes using multi-walled carbon nanotubes as ion-to-electron transducers for the detection of perchlorate
Enrique J. Parra et al.
ANALYST (2009)
Limitations of Current Polarization for Lowering the Detection Limit of Potentiometric Polymeric Membrane Sensors
Lajos Hoefler et al.
ANALYTICAL CHEMISTRY (2009)
Solid-Contact Reference Electrodes Based on Lipophilic Salts
Ulriika Mattinen et al.
ELECTROANALYSIS (2009)
Solid-state reference electrodes for potentiometric sensors
U. Guth et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2009)
Quality control criteria for solid-contact, solvent polymeric membrane ion-selective electrodes
Ernoe Lindner et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2009)
Light sensitivity and potential stability of electrically conducting polymers commonly used in solid contact ion-selective electrodes
Tom Lindfors
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2009)
Influence of inner transducer properties on EMF response and stability of solid-contact anion-selective membrane electrodes based on metalloporphyrin ionophores
Lukasz Gorski et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2009)
Fluorous Polymeric Membranes for Ionophore-Based Ion-Selective Potentiometry: How Inert Is Teflon AF?
Chun-Ze Lai et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Fluorophilic ionophores for potentiometric pH determinations with fluorous membranes of exceptional selectivity
Paul G. Boswell et al.
ANALYTICAL CHEMISTRY (2008)
Obtaining Nernstian Response of a Ca2+-Selective Electrode in a Broad Concentration Range by Tuned Galvanostatic Polarization
Maria A. Peshkova et al.
ANALYTICAL CHEMISTRY (2008)
Elimination of undesirable water layers in solid-contact polymeric ion-selective electrodes
Jean-Pierre Veder et al.
ANALYTICAL CHEMISTRY (2008)
Ion-selective electrodes using carbon nanotubes as ion-to-electron transducers
Gaston A. Crespo et al.
ANALYTICAL CHEMISTRY (2008)
Potentiometric ion sensors
Johan Bobacka et al.
CHEMICAL REVIEWS (2008)
All-solid-state reference electrodes with poly(n-butyl acrylate) based membranes
Anna Kisiel et al.
ELECTROANALYSIS (2008)
Preparation of a highly fluorophilic phosphonium salt and its use in a fluorous anion-exchanger membrane with high selectivity for perfluorinated acids
Paul G. Boswell et al.
JOURNAL OF FLUORINE CHEMISTRY (2008)
Plasticization of amorphous perfluoropolymers
Elizabeth C. Lugert et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2008)
Performance evaluation criteria for preparation and measurement of macro- and microfabricated ion-selective electrodes (IUPAC technical report)
Erno Lindner et al.
PURE AND APPLIED CHEMISTRY (2008)
Ion-selective electrode potentiometry in environmental analysis
Roland De Marco et al.
ELECTROANALYSIS (2007)
Ion-selective electrodes with three-dimensionally ordered macroporous carbon as the solid contact
Chun-Ze Lai et al.
ANALYTICAL CHEMISTRY (2007)
Time-dependent phenomena in the potential response of ion-selective electrodes treated by the Nernst-Planck-Poisson model. 1. Intramembrane processes and selectivity
Peter Lingenfelter et al.
ANALYTICAL CHEMISTRY (2006)
A new salt bridge based on the hydrophobic room-temperature molten salt
Takashi Kakiuchi et al.
BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2006)
Approaches to improving the lower detection limit of polymeric membrane ion-selective electrodes
Zsofia Szigeti et al.
ELECTROANALYSIS (2006)
Nitrate-selective solid contact electrodes with poly(3-octylthiophene) and poly(aniline) as ion-to-electron transducers buffered with electron-ion-exchanging resin
Galina A. Khripoun et al.
ELECTROANALYSIS (2006)
All-solid-state miniaturised planar reference electrodes based on ionic liquids
R Maminska et al.
SENSORS AND ACTUATORS B-CHEMICAL (2006)
Miniaturized, planar ion-selective electrodes fabricated by means of thick-film technology
Lukasz Tymecki et al.
SENSORS (2006)
Solid contact potentiometric sensors for trace level measurements
KY Chumbimuni-Torres et al.
ANALYTICAL CHEMISTRY (2006)
Optimizing the analytical performance and construction of ion-selective electrodes with conducting polymer-based ion-to-electron transducers
A Michalska
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2006)
Conducting polymer-based solid-state ion-selective electrodes
J Bobacka
ELECTROANALYSIS (2006)
A polymeric junction membrane for solid-state reference electrodes
J Ha et al.
ANALYTICA CHIMICA ACTA (2005)
Potentiometric Ag+ sensors based on conducting polymers:: A comparison between poly(3,4-ethylenedioxythiophene) and polypyrrole doped with sulfonated calixarenes
Z Mousavi et al.
ELECTROANALYSIS (2005)
The influence of spontaneous charging/discharging of conducting polymer ion-to-electron transducer on potentiometric responses of all-solid-state calcium-selective electrodes
A Michalska et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2005)
All-solid-state reference electrodes based on conducting polymers
A Kisiel et al.
ANALYST (2005)
An experimental study of membrane materials and inner contacting layers for ion-selective K+ electrodes with a stable response and good dynamic range
AJ Michalska et al.
ANALYTICAL CHEMISTRY (2004)
Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range
J Sutter et al.
ANALYTICA CHIMICA ACTA (2004)
Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese
P Upreti et al.
TALANTA (2004)
Pulsed galvanostatic control of ionophore-based polymeric ion sensors
A Shvarev et al.
ANALYTICAL CHEMISTRY (2003)
Towards reversibility of ion transfer across the interface between valinomycin membranes and aqueous electrolyte solutions
KN Mikhelson et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2003)
Behavior of a polypyrrole solid contact pH-selective electrode based on tertiary amine ionophores containing different alkyl chain lengths between nitrogen and a phenyl group
WS Han et al.
ANALYTICAL SCIENCES (2003)
All-solid-state calcium solvent polymeric membrane electrode for low-level concentration measurements
A Michalska et al.
ANALYTICAL CHEMISTRY (2003)
Conducting polymers as electrode materials in supercapacitors
M Mastragostino et al.
SOLID STATE IONICS (2002)
Influence of oxygen and carbon dioxide on the electrochemical stability of poly(3,4-ethylenedioxythiophene) used as ion-to-electron transducer in all-solid-state ion-selective electrodes
M Vázquez et al.
SENSORS AND ACTUATORS B-CHEMICAL (2002)
Selectivity of lithium electrodes: Correlation with ion-ionophore complex stability constants and with interfacial exchange current densities
KN Mikhelson et al.
ANALYTICAL CHEMISTRY (2002)
Assessing a photocured self-plasticised acrylic membrane recipe for Na+ and K+ ion selective electrodes
LY Heng et al.
ANALYTICA CHIMICA ACTA (2001)
Polymer-based supercapacitors
M Mastragostino et al.
JOURNAL OF POWER SOURCES (2001)
All-solid-state potentiometric sensors sensitive to nonionic surfactants based on ionophores containing ethoxylate units
S Martínez-Barrachina et al.
TALANTA (2001)
Potentiometric selectivity coefficients of ion-selective electrodes Part I.: Inorganic cations -: (Technical report)
Y Umezawa et al.
PURE AND APPLIED CHEMISTRY (2000)
n- and p-doped poly(3,4-ethylenedioxythiophene): Two electronically conducting states of the polymer
HJ Ahonen et al.
MACROMOLECULES (2000)
Solid-state ion sensors with a liquid junction-free polymer membrane-based reference electrode for blood analysis
HJ Yoon et al.
SENSORS AND ACTUATORS B-CHEMICAL (2000)
Selectivity of potentiometric ion sensors
E Bakker et al.
ANALYTICAL CHEMISTRY (2000)
Methacrylic-acrylic polymers in ion-selective membranes: achieving the right polymer recipe
LY Heng et al.
ANALYTICA CHIMICA ACTA (2000)
Producing self-plasticizing ion-selective membranes
LY Heng et al.
ANALYTICAL CHEMISTRY (2000)
Share Paper
