Related references
Note: Only part of the references are listed.Quality assurance for a six degrees-of-freedom table using a 3D printed phantom
Kyle Woods et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2018)
Using 3D printing techniques to create an anthropomorphic thorax phantom for medical imaging purposes
Colien Hazelaar et al.
MEDICAL PHYSICS (2018)
Verification of Acuros XB dose algorithm using 3D printed low-density phantoms for clinical photon beams
Rodolfo Zavan et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2018)
3D-Printed masks as a new approach for immobilization in radiotherapy – a study of positioning accuracy
Matthias Felix Haefner et al.
Oncotarget (2018)
Production of patient-specific electron beam aperture cut-outs using a low-cost, multi-purpose 3D printer
Steven Michiels et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2018)
A patient-specific three-dimensional couplant pad for ultrasound image-guided radiation therapy: a feasibility study
Heejung Kim et al.
RADIATION ONCOLOGY (2018)
Patient-specific bolus for range shifter air gap reduction in intensity-modulated proton therapy of head-and-neck cancer studied with Monte Carlo based plan optimization
Steven Michiels et al.
RADIOTHERAPY AND ONCOLOGY (2018)
Preparation and fabrication of a full-scale, sagittal-sliced, 3D-printed, patient-specific radiotherapy phantom
Daniel F. Craft et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2017)
Clinical applications of 3-dimensional printing in radiation therapy
Yizhou Zhao et al.
MEDICAL DOSIMETRY (2017)
Three-dimensional printer-generated patient-specific phantom for artificial in vivo dosimetry in radiotherapy quality assurance
Takeshi Kamomae et al.
PHYSICA MEDICA-EUROPEAN JOURNAL OF MEDICAL PHYSICS (2017)
Total body irradiation with a compensator fabricated using a 3D optical scanner and a 3D printer
So-Yeon Park et al.
PHYSICS IN MEDICINE AND BIOLOGY (2017)
Characterization of 3D printing techniques: Toward patient specific quality assurance spine-shaped phantom for stereotactic body radiation therapy
Min-Joo Kim et al.
PLOS ONE (2017)
Clinical implementation of 3D printing in the construction of patient specific bolus for electron beam radiotherapy for non-melanoma skin cancer
Richard A. Canters et al.
RADIOTHERAPY AND ONCOLOGY (2016)
Individualised 3D printed vaginal template for MRI guided brachytherapy in locally advanced cervical cancer
Jacob Christian Lindegaard et al.
RADIOTHERAPY AND ONCOLOGY (2016)
3D printed facial laser scans for the production of localised radiotherapy treatment masks - A case study
Matthew Briggs et al.
JOURNAL OF VISUAL COMMUNICATION IN MEDICINE (2016)
A feasibility study for using ABS plastic and a low-cost 3D printer for patient-specific brachytherapy mould design
Benjamin D. Harris et al.
AUSTRALASIAN PHYSICAL & ENGINEERING SCIENCES IN MEDICINE (2015)
Potential of 3D printing technologies for fabrication of electron bolus and proton compensators
Wei Zou et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2015)
A Customized Bolus Produced Using a 3-Dimensional Printer for Radiotherapy
Shin-Wook Kim et al.
PLOS ONE (2014)
Share Paper
