Related references
Note: Only part of the references are listed.A novel synthesis approach to partially fluorinated sulfonimide based poly (arylene ether sulfone) s for proton exchange membrane
Sabuj Chandra Sutradhar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Proton-conducting phosphotungstic acid/sulfonated fluorinated block copolymer composite membrane for polymer electrolyte fuel cells with reduced hydrogen permeability
Ae Rhan Kim et al.
POLYMER BULLETIN (2018)
Highly sulfonated poly(ether ether ketone) grafted on graphene oxide as nanohybrid proton exchange membrane applied in fuel cells
Shuitao Gao et al.
ELECTROCHIMICA ACTA (2018)
Facile preparation of blend proton exchange membranes with highly sulfonated poly(arylene ether) and poly(arylene ether sulfone) bearing dense triazoles
Min-Kyoon Ahn et al.
JOURNAL OF MEMBRANE SCIENCE (2018)
High durability sulfonated poly (ether ether ketone)-ceria nanocomposite membranes for proton exchange membrane fuel cell applications
Mohammad Javad Parnian et al.
JOURNAL OF MEMBRANE SCIENCE (2018)
Chemical stability enhancement of Nafion membrane by impregnation of a novel organic •OH radical scavenger, 3,4-dihydroxy-cinnamic acid
Yongman Park et al.
JOURNAL OF MEMBRANE SCIENCE (2018)
Sulfonated fluorinated block copolymer containing naphthalene unit/sulfonated polyvinylidene-co-hexafluoropropylene/functionalized silicon dioxide ternary composite membrane for low-humidity fuel cell applications
Ae Rhan Kim et al.
COLLOID AND POLYMER SCIENCE (2018)
Alleviating the Mechanical and Thermal Degradations of Highly Sulfonated Poly(Ether Ether Ketone) Blocks via Copolymerization with Hydrophobic Unit for Intermediate Humidity Fuel Cells
Ae Rhan Kim et al.
POLYMERS (2018)
Benefits of using carbon nanotubes in fuel cells: a review
Elnaz Akbari et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2017)
Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel cell applications
Mohammad Javad Parnian et al.
ENERGY (2017)
Silica-embedded hydrogel nanofiller for enhancing low humidity proton conduction of a hydrocarbon-based polymer electrolyte membrane
Keun-Hwan Oh et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Novel Proton Conducting Membranes from the Combination of Sulfonated Polymers of Polyetheretherketones and Polyphosphazenes Doped with Sulfonated Single-Walled Carbon Nanotubes
Tianwei Luo et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Sulfonated multi-walled carbon nanotubes for biodiesel production through triglycerides transesterification
Qingqing Guan et al.
RSC ADVANCES (2017)
Toward improved mechanical strength, oxidative stability and proton conductivity of an aligned quadratic hybrid (SPEEK/FPAPB/Fe3O4-FGO) membrane for application in high temperature and low humidity fuel cells
Mohanraj Vinothkannan et al.
RSC ADVANCES (2017)
Zr-doped ceria additives for enhanced PEM fuel cell durability and radical scavenger stability
Andrew M. Baker et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
A novel porous sulfonated poly(ether ether ketone)-based multi-layer composite membrane for proton exchange membrane fuel cell application
Yongyi Jiang et al.
SUSTAINABLE ENERGY & FUELS (2017)
Artificially designed, low humidifying organic inorganic (SFBC-50/FSiO2) composite membrane for electrolyte applications of fuel cells
Ae Rhan Kim et al.
COMPOSITES PART B-ENGINEERING (2017)
Fast mass and charge transport through electrically aligned CNT/polymer nanocomposite membranes
Anshu Sharma et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2016)
Gradiently crosslinked polymer electrolyte membranes in fuel cells
De An et al.
JOURNAL OF POWER SOURCES (2016)
Achieving Continuous Anion Transport Domains Using Block Copolymers Containing Phosphonium Cations
Wenxu Zhang et al.
MACROMOLECULES (2016)
Dynamic water sorption for the study of amorphous content of vacuum-dried honey powder
Bambang Nurhadi et al.
POWDER TECHNOLOGY (2016)
Ternary hybrid (SPEEK/SPVdF-HFP/GO) based membrane electrolyte for the applications of fuel cells: profile of improved mechanical strength, thermal stability and proton conductivity
Mohanraj Vinothkannan et al.
RSC ADVANCES (2016)
Effect of sulfonated graphene oxide on the performance enhancement of acid-base composite membranes for direct methanol fuel cells
S. Neelakandan et al.
RSC ADVANCES (2016)
The effect of sulfonated poly (ether ether ketone) as the electrode ionomer for self-humidifying nanocomposite proton exchange membrane fuel cells
Aylin Rahnavard et al.
ENERGY (2015)
Power and energy management of grid/PEMFC/battery/supercapacitor hybrid power sources for UPS applications
Yuedong Zhan et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2015)
Water sorption and expansion of an ionomer membrane constrained by fuel cell electrodes
Marc-Antoni Goulet et al.
JOURNAL OF POWER SOURCES (2015)
Novel sulfonated poly (ether ether ketone)/silica coated carbon nanotubes high-performance composite membranes for direct methanol fuel cell
Li Cui et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2015)
Development of non-covalent ternary polymer-CNT composites as a novel supporting material for electrooxidation of glycerol
Dakshinamoorthy Prasanna et al.
RSC ADVANCES (2015)
Sulfonated poly(arylene ether sulfone) composite membranes having poly(2,5-benzimidazole)-grafted graphene oxide for fuel cell applications
Taeyun Ko et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Thermodynamic study on dynamic water and organic vapor sorption on amorphous valnemulin hydrochloride
Jinbo Ouyang et al.
FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2015)
Dramatic Improvement in Water Retention and Proton Conductivity in Electrically Aligned Functionalized CNT/SPEEK Nanohybrid PEM
Swati Gahlot et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Proton conductivity of perfluorosulfonate ionomers at high temperature and high relative humidity
Bruno R. Matos et al.
APPLIED PHYSICS LETTERS (2014)
Review of Advanced Materials for Proton Exchange Membrane Fuel Cells
Alexander Kraytsberg et al.
ENERGY & FUELS (2014)
Nafion Membranes Reinforced with Ceria-Coated Multiwall Carbon Nanotubes for Improved Mechanical and Chemical Durability in Polymer Electrolyte Membrane Fuel Cells
Andrew M. Baker et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Polymer electrolyte fuel cell performance of poly(arylene ether ketone)-graft-crosslinked-poly(sulfonated arylene ether sulfone)
Ryousuke Hara et al.
JOURNAL OF POWER SOURCES (2014)
Enhancement of proton conductivity of chitosan membrane enabled by sulfonated graphene oxide under both hydrated and anhydrous conditions
Yahua Liu et al.
JOURNAL OF POWER SOURCES (2014)
Studies on the thermal decomposition of multiwall carbon nanotubes under different atmospheres
Amit Mahajan et al.
MATERIALS LETTERS (2013)
The role of internal pressure for the hydration and transport properties of ionomers and polyelectrolytes
Klaus-Dieter Kreuer
SOLID STATE IONICS (2013)
Nafion/benzotriazole functionalized montmorillonite nanocomposites: novel high-performance proton exchange membranes
Mohammad Mahdi Hasani-Sadrabadi et al.
RSC ADVANCES (2013)
Sulfonated Polybenzophenone/Poly(arylene ether) Block Copolymer Membranes for Fuel Cell Applications
Takahiro Miyahara et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Sulfonated carbon nanotubes/sulfonated poly(ether sulfone ether ketone ketone) composites for polymer electrolyte membranes
Weihua Zhou et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2011)
Investigation of durability issues of selected nonfluorinated proton exchange membranes for fuel cell application
L Zhang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Effect of molecular weight on brittle-to-ductile transition temperature of polyetherimide
MA Sanner et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Share Paper
