Related references
Note: Only part of the references are listed.Research on tunnel ventilation systems: Dust Diffusion and Pollution Behaviour by air curtains based on CFD technology and field measurement
Qiang Liu et al.
BUILDING AND ENVIRONMENT (2019)
Effects of spraying pressure and installation angle of nozzles on atomization characteristics of external spraying system at a fully-mechanized mining face
Shibo Yang et al.
POWDER TECHNOLOGY (2019)
Experimental investigation on occurrence of gassy coal extrusion in coalmine
Jie Liu et al.
SAFETY SCIENCE (2019)
Gas desorption characteristics effected by the pulsating hydraulic fracturing in coal
Ni Guanhua et al.
FUEL (2019)
Effects of air volume ratio parameters on air curtain dust suppression in a rock tunnel's fully-mechanized working face
Hao Wang et al.
ADVANCED POWDER TECHNOLOGY (2018)
An investigation of the nozzle's atomization dust suppression rules in a fully-mechanized excavation face based on the airflow-droplet-dust three-phase coupling model
Haiming Yu et al.
ADVANCED POWDER TECHNOLOGY (2018)
EXPERIMENTAL STUDY OF SPRAY BREAKUP PHENOMENA IN SMALL-SCALE SIMPLEX ATOMIZERS WITH AND WITHOUT AIR SWIRL
Govindaraj Muthuselvan et al.
ATOMIZATION AND SPRAYS (2018)
Preparation and characteristics of a multifunctional dust suppressant with agglomeration and wettability performance used in coal mine
Gang Zhou et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Performance optimization of one-component polyurethane healing agent for self-healing concrete
Zun-Xiang Hu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Diffuse pollution characteristics of respirable dust in fully-mechanized mining face under various velocities based on CFD investigation
Qi Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Development of cement dust suppression technology during shotcrete in mine of China-A review
Lianjun Chen et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2018)
Flow characteristics of fresh air discharged from a ventilation duct for mine ventilation
Jongmyung Park et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
The mechanism and relief method of the coal seam water blocking effect (WBE) based on the surfactants
Guanhua Ni et al.
POWDER TECHNOLOGY (2018)
Improving the permeability of coal seam with pulsating hydraulic fracturing technique: A case study in Changping coal mine, China
Ni Guanhua et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Preparation and characterization of a wetting-agglomeration-based hybrid coal dust suppressant
Tao Fan et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Experimental Study on the Pore Structure Fractals and Seepage Characteristics of a Coal Sample Around a Borehole in Coal Seam Water Infusion
Zhen Liu et al.
TRANSPORT IN POROUS MEDIA (2018)
The effect of high temperature environment on rock properties-an example of electromagnetic radiation characterization
Biao Kong et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)
Effects of turbulent airflow from coal cutting on pollution characteristics of coal dust in fully-mechanized mining face: A case study
Biao Sun et al.
JOURNAL OF CLEANER PRODUCTION (2018)
An experimental study for characterization the process of coal oxidation and spontaneous combustion by electromagnetic radiation technique
Biao Kong et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
The development and characterization of a novel coagulant for dust suppression in open-cast coal mines
Gang Zhou et al.
ADSORPTION SCIENCE & TECHNOLOGY (2018)
Height of the mining-induced fractured zone above a coal face
Gang Wang et al.
ENGINEERING GEOLOGY (2017)
An intelligent gel designed to control the spontaneous combustion of coal: Fire prevention and extinguishing properties
Weimin Cheng et al.
FUEL (2017)
Preparation and chemical characterization of an environmentally-friendly coal dust cementing agent
Gang Zhou et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2017)
Numerical investigation of dust dispersion in a coal roadway with hybrid ventilation system
Fan Geng et al.
POWDER TECHNOLOGY (2017)
The diffusion behavior law of respirable dust at fully mechanized caving face in coal mine: CFD numerical simulation and engineering application
Gang Zhou et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)
Investigating and optimizing the mix proportion of pumping wet-mix shotcrete with polypropylene fiber
Guoming Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Potential Accuracy of Methods of Laser Doppler Anemometry in the Single-Particle Scattering Mode
V. S. Sobolev et al.
OPTOELECTRONICS INSTRUMENTATION AND DATA PROCESSING (2017)
A novel spraying/negative-pressure secondary dust suppression device used in fully mechanized mining face: A case study
Wen Nie et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2016)
Characterization of Coal Micro-Pore Structure and Simulation on the Seepage Rules of Low-Pressure Water Based on CT Scanning Data
Gang Zhou et al.
MINERALS (2016)
DPM simulation in an underground entry: Comparison between particle and species models
Thiruvengadam Magesh et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2016)
Experimental and numerical study of cavitation inception phenomenon in diesel injector nozzles
Zhixia He et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)
Optimization and implementation of a foam system to suppress dust in coal mine excavation face
Qingguo Wang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2015)
Prevalence Characteristics of Coal Workers' Pneumoconiosis (CWP) in a State-Owned Mine in Eastern China
Lei Han et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2015)
Modeling the influence of forced ventilation on the dispersion of droplets ejected from roadheader-mounted external sprayer
Han Fangwei et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2014)
Dust dispersion and management in underground mining faces
Kurnia Jundika Candra et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2014)
PM10 in the ambient air of Chandrapur coal mine and its comparison with other environments
K. V. George et al.
ENVIRONMENTAL MONITORING AND ASSESSMENT (2013)
Application of the Tomographic Laser Doppler Anemometry (TDLA) to a fuel spray
Christian Pfeifer et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2011)
A Computational Flow Analysis for Choosing the Diameter and Position of an Air Duct in a Working Face
Dong-Kil Lee
JOURNAL OF MINING SCIENCE (2011)
A statistical analysis of coal mine accidents caused by coal dust explosions in China
Yuan-Pan Zheng et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2009)
Imaging and PDA analysis of a GDI spray in the near-nozzle region
G Wigley et al.
EXPERIMENTS IN FLUIDS (2004)
An experimental and numerical study on fuel atomization characteristics of high-pressure diesel injection sprays
CS Lee et al.
FUEL (2002)
Prediction of dust loss from conveyors using computational fluid dynamics modelling
PJ Witt et al.
APPLIED MATHEMATICAL MODELLING (2002)
Modeling atomization of high-pressure diesel sprays
GM Bianchi et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2001)