Related references
Note: Only part of the references are listed.Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication
Indong Jun et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Solid state characterisation and taste masking efficiency evaluation of polymer based extrudates of isoniazid for paediatric administration
Alison V. Keating et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Biomedical application and controlled drug release of electrospun fibrous materials
Huiling Cheng et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
Electrospun Poly(ε-caprolactone) Nanofibrous Mesh for Imiquimod Delivery in Melanoma Therapy
Wei-Chih Lin et al.
POLYMERS (2018)
Electrospun Zein Fibers Incorporating Poly(glycerol sebacate) for Soft Tissue Engineering
Lena Vogt et al.
NANOMATERIALS (2018)
Sustained-release amorphous solid dispersions
Julien Maincent et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2018)
Solid-State Stability Issues of Drugs in Transdermal Patch Formulations
Purnendu Kumar Sharma et al.
AAPS PHARMSCITECH (2018)
Design of spray dried ternary solid dispersions comprising itraconazole, soluplus and HPMCP: Effect of constituent compositions
Mark T. Davis et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Electrospun nanofibers for wound healing
Minghuan Liu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Microfibrous Solid Dispersions of Poorly Water-Soluble Drugs Produced via Centrifugal Spinning: Unexpected Dissolution Behavior on Recrystallization
Stefania Marano et al.
MOLECULAR PHARMACEUTICS (2017)
Novel PAN/PVP Janus ultrafine fiber membrane and its application for biphasic drug release
Yuting Geng et al.
JOURNAL OF MATERIALS CHEMISTRY B (2017)
Development and Characterization of an Amorphous Solid Dispersion of Furosemide in the Form of a Sublingual Bioadhesive Film to Enhance Bioavailability
Viviana De Caro et al.
PHARMACEUTICS (2017)
Development and tableting of directly compressible powder from electrospun nanofibrous amorphous solid dispersion
B. Demuth et al.
ADVANCED POWDER TECHNOLOGY (2017)
Nanosized sustained-release drug depots fabricated using modified tri-axial electrospinning
Guang-Zhi Yang et al.
ACTA BIOMATERIALIA (2017)
Electrospun Zein/PCL Fibrous Matrices Release Tetracycline in a Controlled Manner, Killing Staphylococcus aureus Both in Biofilms and Ex Vivo on Pig Skin, and are Compatible with Human Skin Cells
Nour Alhusein et al.
PHARMACEUTICAL RESEARCH (2016)
Electrospun pH-sensitive core shell polymer nanocomposites fabricated using a tri-axial process
Chen Yang et al.
ACTA BIOMATERIALIA (2016)
Recent developments in micro-and nanofabrication techniques for the preparation of amorphous pharmaceutical dosage forms
Sheng Qi et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Spray drying formulation of amorphous solid dispersions
Abhishek Singh et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Application of ethyl cellulose, microcrystalline cellulose and octadecanol for wax based floating solid dispersion pellets
Hong-Xiang Yan et al.
CARBOHYDRATE POLYMERS (2016)
Medicated Janus fibers fabricated using a Teflon-coated side-by-side spinneret
Deng-Guang Yu et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2016)
Development of micro-fibrous solid dispersions of poorly water-soluble drugs in sucrose using temperature-controlled centrifugal spinning
Stefania Marano et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
Solid microcrystalline dispersion films as a new strategy to improve the dissolution rate of poorly water soluble drugs: A case study using olanzapine
Laura Modica de Mohac et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Lubricant-Induced Crystallization of Itraconazole From Tablets Made of Electrospun Amorphous Solid Dispersion
Balazs Demuth et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2016)
The multifunctional wound dressing with core-shell structured fibers prepared by coaxial electrospinning
Qilin Wei et al.
FRONTIERS OF MATERIALS SCIENCE (2016)
Stability-enhanced Hot-melt Extruded Amorphous Solid Dispersions via Combinations of Soluplus® and HPMCAS-HF
Saad M. Alshahrani et al.
AAPS PHARMSCITECH (2015)
Classification of solid dispersions: correlation to (i) stability and solubility (ii) preparation and characterization techniques
Fan Meng et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2015)
Improving the API dissolution rate during pharmaceutical hot-melt extrusion I: Effect of the API particle size, and the co-rotating, twin-screw extruder screw configuration on the API dissolution rate
Meng Li et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
High speed electrospinning for scaled-up production of amorphous solid dispersion of itraconazole
Zsombor K. Nagy et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Development and Characterization of Amorphous Nanofiber Drug Dispersions Prepared Using Pressurized Gyration
Bahijja Tolulope Raimi-Abraham et al.
MOLECULAR PHARMACEUTICS (2015)
Overview of milling techniques for improving the solubility of poorly water-soluble drugs
Zhi Hui Loh et al.
ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Enhanced dissolution and bioavailability of grapefruit flavonoid Naringenin by solid dispersion utilizing fourth generation carrier
Abdul Wadood Khan et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2015)
Therapeutic applications of electrospun nanofibers for drug delivery systems
Young Ju Son et al.
ARCHIVES OF PHARMACAL RESEARCH (2014)
Mebeverine-Loaded Electrospun Nanofibers: Physicochemical Characterization and Dissolution Studies
Upulitha Eranka Illangakoon et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
The Influence of Drug Physical State on the Dissolution Enhancement of Solid Dispersions Prepared Via Hot-Melt Extrusion: A Case Study Using Olanzapine
Maria Fatima Pina et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
Interactions between drugs and polymers influencing hot melt extrusion
Yongcheng Li et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2014)
New Electrospinning Nozzle to Reduce Jet Instability and Its Application to Manufacture of Multi-layered Nanofibers
Byoung-Sun Lee et al.
SCIENTIFIC REPORTS (2014)
Fundamental aspects of solid dispersion technology for poorly soluble drugs
Yanbin Huang et al.
ACTA PHARMACEUTICA SINICA B (2014)
Electrospun biphasic drug release polyvinylpyrrolidone/ethyl cellulose core/sheath nanofibers
D. G. Yu et al.
ACTA BIOMATERIALIA (2013)
Solid dispersion of quercetin in cellulose derivative matrices influences both solubility and stability
Bin Li et al.
CARBOHYDRATE POLYMERS (2013)
Fabrication of fenofibrate nanocrystals by probe sonication method for enhancement of dissolution rate and oral bioavailability
Pradum Pundlikrao Ige et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2013)
Increased dissolution and oral absorption of itraconazole/Soluplus extrudate compared with itraconazole nanosuspension
Keru Zhang et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2013)
Current trends and future perspectives of solid dispersions containing poorly water-soluble drugs
Chau Le-Ngoc Vo et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2013)
Stabilisation of amorphous drugs under high humidity using pharmaceutical thin films
Yuen Chuen Ng et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2013)
Manufacturing of solid dispersions of poorly water soluble drugs by spray drying: Formulation and process considerations
Amrit Paudel et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Improved human bioavailability of vemurafenib, a practically insoluble drug, using an amorphous polymer-stabilized solid dispersion prepared by a solvent-controlled coprecipitation process
Navnit Shah et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Unexpected performance of physical mixtures over solid dispersions on the dissolution behavior of benznidazole from tablets
Dario Leonardi et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Prediction of drug-polymer miscibility through the use of solubility parameter based flory-huggins interaction parameter and the experimental validation: PEG as model polymer
Seema Thakral et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2013)
Early Stage Phase Separation in Pharmaceutical Solid Dispersion Thin Films under High Humidity: Improved Spatial Understanding Using Probe-Based Thermal and Spectroscopic Nanocharacterization Methods
Sheng Qi et al.
MOLECULAR PHARMACEUTICS (2013)
Dissolution rate enhancement of loratadine in polyvinylpyrrolidone K-30 solid dispersions by solvent methods
Fernando Frizon et al.
POWDER TECHNOLOGY (2013)
Solupluse®: A novel polymeric solubilizer for optimization of Carvedilol solid dispersions: Formulation design and effect of method of preparation
Rehab N. Shamma et al.
POWDER TECHNOLOGY (2013)
Coaxial electrospun nanostructures and their applications
Honglin Qu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Zein/polycaprolactone electrospun matrices for localised controlled delivery of tetracycline
Nour Alhusein et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2013)
Killing bacteria within biofilms by sustained release of tetracycline from triple-layered electrospun micro/nanofibre matrices of polycaprolactone and poly(ethylene-co-vinyl acetate)
Nour Alhusein et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2013)
Electrospinning versus fibre production methods: from specifics to technological convergence
C. J. Luo et al.
CHEMICAL SOCIETY REVIEWS (2012)
Crystallinity evaluation of tacrolimus solid dispersions by chemometric analysis
Ahmed S. Zidan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
A systematic study of captopril-loaded polyester fiber mats prepared by electrospinning
Hua Zhang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Comparison of electrospun and extruded soluplus®-based solid dosage forms of improved dissolution
Zsombor K. Nagy et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2012)
Electrospun nanofibers in drug delivery: recent developments and perspectives
Gareth R. Williams et al.
THERAPEUTIC DELIVERY (2012)
Preparation of a chemically stable quercetin formulation using nanosuspension technology
Lei Gao et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Dissolution Improvement of Electrospun Nanofiber-Based Solid Dispersions for Acetaminophen
Deng-Guang Yu et al.
AAPS PHARMSCITECH (2010)
In Vivo Study of a Polymeric Glucose-Sensitive Insulin Delivery System Using a Rat Model
M. Joan Taylor et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2010)
Electro spinning: Applications in drug delivery and tissue engineering
Travis J. Sill et al.
BIOMATERIALS (2008)
Particle shape and orientation in laser diffraction and static image analysis size distribution analysis of micrometer sized rectangular particles
A. P. Tinke et al.
POWDER TECHNOLOGY (2008)
Solid dispersions as strategy to improve oral bioavailability of poor water soluble drugs
Teofilo Vasconcelos et al.
DRUG DISCOVERY TODAY (2007)
Formulation of poorly water-soluble drugs for oral administration: Physicochemical and physiological issues and the lipid formulation classification system
Colin W. Pouton
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2006)
Characterization of the mode of incorporation of lipophilic compounds in solid dispersions at the nanoscale using fluorescence resonance energy transfer (FRET)
Dirk Jan van Drooge et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2006)
Nanosuspensions in drug delivery
BE Rabinow
NATURE REVIEWS DRUG DISCOVERY (2004)
Electrospinning of nanofibers: Reinventing the wheel?
D Li et al.
ADVANCED MATERIALS (2004)
Preparation and characterization of nanofibers containing amorphous drug dispersions generated by electrostatic spinning
G Verreck et al.
PHARMACEUTICAL RESEARCH (2003)
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
ZM Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
The mechanisms of drug release from solid dispersions in water-soluble polymers
DQM Craig
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2002)
Improving drug solubility for oral delivery using solid dispersions
C Leuner et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2000)
Share Paper
