Related references
Note: Only part of the references are listed.Auxetic Cardiac Patches with Tunable Mechanical and Conductive Properties toward Treating Myocardial Infarction
Michaella Kapnisi et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect
Fei Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting
Amir K. Miri et al.
ADVANCED MATERIALS (2018)
Rapid continuous 3D printing of customizable peripheral nerve guidance conduits
Wei Zhu et al.
MATERIALS TODAY (2018)
3D printing for soft robotics - a review
Jahan Zeb Gul et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)
Continuous Optical 3D Printing of Green Aliphatic Polyurethanes
Sang-Hyun Pyo et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Rapid Continuous Multimaterial Extrusion Bioprinting
Wanjun Liu et al.
ADVANCED MATERIALS (2017)
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Johan U. Lind et al.
NATURE MATERIALS (2017)
Magnetically Bioprinted Human Myometrial 3D Cell Rings as A Model for Uterine Contractility
Glauco R. Souza et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Engineering muscle cell alignment through 3D bioprinting
Pamela Mozetic et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
3D-printed biomaterials with regional auxetic properties
John J. Warner et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
A bioprosthetic ovary created using 3D printed microporous scaffolds restores ovarian function in sterilized mice
Monica M. Laronda et al.
NATURE COMMUNICATIONS (2017)
3D Printed Vascularized Device for Subcutaneous Transplantation of Human Islets
Marco Farina et al.
BIOTECHNOLOGY JOURNAL (2017)
3D-printed vascular networks direct therapeutic angiogenesis in ischaemia
T. Mirabella et al.
NATURE BIOMEDICAL ENGINEERING (2017)
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Duong Nguyen et al.
SCIENTIFIC REPORTS (2017)
Multi-tissue interactions in an integrated three-tissue organ-on-a-chip platform
Aleksander Skardal et al.
SCIENTIFIC REPORTS (2017)
Recent advances in strategies for peripheral nerve tissue engineering
Sahba Mobini et al.
CURRENT OPINION IN BIOMEDICAL ENGINEERING (2017)
Design of a 3D printer head for additive manufacturing of sugar glass for tissue engineering applications
Andre Begin-Drolet et al.
ADDITIVE MANUFACTURING (2017)
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Wei Zhu et al.
BIOMATERIALS (2017)
Development of Liver Decellularized Extracellular Matrix Bioink for Three-Dimensional Cell Printing-Based Liver Tissue Engineering
Hyungseok Lee et al.
BIOMACROMOLECULES (2017)
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Kai Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair
Jinah Jang et al.
BIOMATERIALS (2017)
Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
Cristina Colosi et al.
ADVANCED MATERIALS (2016)
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Tomasz Jungst et al.
CHEMICAL REVIEWS (2016)
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
Andreas Blaeser et al.
ADVANCED HEALTHCARE MATERIALS (2016)
A comprehensive review on droplet-based bioprinting: Past, present and future
Hemanth Gudapati et al.
BIOMATERIALS (2016)
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Yu Shrike Zhang et al.
BIOMATERIALS (2016)
Hardwiring Stem Cell Communication through Tissue Structure
Tianchi Xin et al.
CELL (2016)
Material Cues as Potent Regulators of Epigenetics and Stem Cell Function
Spencer W. Crowder et al.
CELL STEM CELL (2016)
Application areas of 3D bioprinting
Ibrahim T. Ozbolat et al.
DRUG DISCOVERY TODAY (2016)
3D printed microfluidic devices: enablers and barriers
Sidra Waheed et al.
LAB ON A CHIP (2016)
A Tubular Biomaterial Construct Exhibiting a Negative Poisson's Ratio
Jin Woo Lee et al.
PLOS ONE (2016)
Optogenetic skeletal muscle-powered adaptive biological machines
Ritu Raman et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
Xuanyi Ma et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Three-dimensional bioprinting of thick vascularized tissues
David B. Kolesky et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Phototactic guidance of a tissue-engineered soft-robotic ray
Sung-Jin Park et al.
SCIENCE (2016)
Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review
Jia Min Lee et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Development of 3D Microvascular Networks Within Gelatin Hydrogels Using Thermoresponsive Sacrificial Microfibers
Jung Bok Lee et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Development of a 3D Printed, Bioengineered Placenta Model to Evaluate the Role of Trophoblast Migration in Preeclampsia
Che-Ying Kuo et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Development of a 3D Printed, Bioengineered Placenta Model to Evaluate the Role of Trophoblast Migration in Preeclampsia
Che-Ying Kuo et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Designing Biomaterials for 3D Printing
Murat Guvendiren et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Zhengjie Wu et al.
SCIENTIFIC REPORTS (2016)
A high-throughput in vitro ring assay for vasoactivity using magnetic 3D bioprinting
Hubert Tseng et al.
SCIENTIFIC REPORTS (2016)
Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips
Kimberly A. Homan et al.
SCIENTIFIC REPORTS (2016)
Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint
Jin-Hyung Shim et al.
BIOFABRICATION (2016)
Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering
Jin Woo Lee et al.
BIOFABRICATION (2016)
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
Adam E. Jakus et al.
ACS NANO (2015)
Biomechanical properties and microstructure of human ventricular myocardium
Gerhard Sommer et al.
ACTA BIOMATERIALIA (2015)
3D-Printed Artificial Microfish
Wei Zhu et al.
ADVANCED MATERIALS (2015)
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
James O. Hardin et al.
ADVANCED MATERIALS (2015)
Dynamic Reciprocity Between Cells and Their Microenvironment in Reproduction
Jeffrey T. Thorne et al.
BIOLOGY OF REPRODUCTION (2015)
Biomimetic 3D tissue printing for soft tissue regeneration
Falguni Pati et al.
BIOMATERIALS (2015)
Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction
Roberto Gaetani et al.
BIOMATERIALS (2015)
Freeform Inkjet Printing of Cellular Structures with Bifurcations
Kyle Christensen et al.
BIOTECHNOLOGY AND BIOENGINEERING (2015)
Three-Dimensional Cell Culture: A Breakthrough in Vivo
Delphine Antoni et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2015)
Nonlinear 3D projection printing of concave hydrogel microstructures for long-term multicellular spheroid and embryoid body culture
K. C. Hribar et al.
LAB ON A CHIP (2015)
Active mixing of complex fluids at the microscale
Thomas J. Ober et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
3D Cardiac Microtissues Encapsulated with the Co-Culture of Cardiomyocytes and Cardiac Fibroblasts
Harpinder Saini et al.
ADVANCED HEALTHCARE MATERIALS (2015)
Nanoparticle-Hydrogel Composites: Concept, Design, and Applications of These Promising, Multi-Functional Materials
Praveen Thoniyot et al.
ADVANCED SCIENCE (2015)
A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks
Zongjie Wang et al.
BIOFABRICATION (2015)
Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D
Alan Faulkner-Jones et al.
BIOFABRICATION (2015)
A novel 3D printing method for cell alignment and differentiation
Ramya Bhuthalingam et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2015)
The need for complex 3D culture models to unravel novel pathways and identify accurate biomarkers in breast cancer
Britta Weigelt et al.
ADVANCED DRUG DELIVERY REVIEWS (2014)
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth et al.
ADVANCED MATERIALS (2014)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
Three-Dimensional Cell Culture Systems and Their Applications in Drug Discovery and Cell-Based Biosensors
Rasheena Edmondson et al.
ASSAY AND DRUG DEVELOPMENT TECHNOLOGIES (2014)
Three-dimensional filamentous human diseased cardiac tissue model
Zhen Ma et al.
BIOMATERIALS (2014)
3D printing of biomimetic microstructures for cancer cell migration
Tina Qing Huang et al.
BIOMEDICAL MICRODEVICES (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Harnessing nanotopography and integrin-matrix interactions to influence stem cell fate
Matthew J. Dalby et al.
NATURE MATERIALS (2014)
Three-dimensionally printed biological machines powered by skeletal muscle
Caroline Cvetkovic et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2014)
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Maling Gou et al.
NATURE COMMUNICATIONS (2014)
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Falguni Pati et al.
NATURE COMMUNICATIONS (2014)
Tuning the Poisson's Ratio of Biomaterials for Investigating Cellular Response
Wande Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Biochemical and Physical Signal Gradients in Hydrogels to Control Stem Cell Behavior
Oju Jeon et al.
ADVANCED MATERIALS (2013)
Relative impact of uniaxial alignment vs. form-induced stress on differentiation of human adipose derived stem cells
Xin Qu et al.
BIOMATERIALS (2013)
Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology
Tao Xu et al.
BIOMATERIALS (2013)
Digital Microfabrication of User-Defined 3D Microstructures in Cell-Laden Hydrogels
Pranav Soman et al.
BIOTECHNOLOGY AND BIOENGINEERING (2013)
Techniques for fabrication and construction of three-dimensional scaffolds for tissue engineering
Tingli Lu et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2013)
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Bin Duan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Photodegradation of pharmaceuticals in the aquatic environment by sunlight and UV-A, -B and -C irradiation
Kohei Kawabata et al.
JOURNAL OF TOXICOLOGICAL SCIENCES (2013)
Spatial tuning of negative and positive Poisson's ratio in a multi-layer scaffold
Pranav Soman et al.
ACTA BIOMATERIALIA (2012)
Photopolymerization of cell-encapsulating hydrogels: Crosslinking efficiency versus cytotoxicity
Iris Mironi-Harpaz et al.
ACTA BIOMATERIALIA (2012)
Microdrop Printing of Hydrogel Bioinks into 3D Tissue-Like Geometries
Kris Pataky et al.
ADVANCED MATERIALS (2012)
Rapid Fabrication of Complex 3D Extracellular Microenvironments by Dynamic Optical Projection Stereolithography
A. Ping Zhang et al.
ADVANCED MATERIALS (2012)
Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography
Tiemo Bueckmann et al.
ADVANCED MATERIALS (2012)
Cancer cell migration within 3D layer-by-layer microfabricated photocrosslinked PEG scaffolds with tunable stiffness
Pranav Soman et al.
BIOMATERIALS (2012)
The alignment and fusion assembly of adipose-derived stem cells on mechanically patterned matrices
Yu Suk Choi et al.
BIOMATERIALS (2012)
Three-dimensional scaffolding to investigate neuronal derivatives of human embryonic stem cells
Pranav Soman et al.
BIOMEDICAL MICRODEVICES (2012)
Deconstructing the third dimension - how 3D culture microenvironments alter cellular cues
Brendon M. Baker et al.
JOURNAL OF CELL SCIENCE (2012)
Development of functional sub-100 nm structures with 3D two-photon polymerization technique and optical methods for characterization
V. Ferreras Paz et al.
JOURNAL OF LASER APPLICATIONS (2012)
The advantages of co-culture over mono cell culture in simulating in vivo environment
Yasuhiro Miki et al.
JOURNAL OF STEROID BIOCHEMISTRY AND MOLECULAR BIOLOGY (2012)
A tissue-engineered jellyfish with biomimetic propulsion
Janna C. Nawroth et al.
NATURE BIOTECHNOLOGY (2012)
Independent regulation of tumor cell migration by matrix stiffness and confinement
Amit Pathak et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
A three-dimensional polymer scaffolding material exhibiting a zero Poisson's ratio
Pranav Soman et al.
SOFT MATTER (2012)
Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds
L. A. Hockaday et al.
BIOFABRICATION (2012)
Development of Miniaturized Walking Biological Machines
Vincent Chan et al.
SCIENTIFIC REPORTS (2012)
Three-Dimensional Polymer Constructs Exhibiting a Tunable Negative Poisson's Ratio
David Y. Fozdar et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
A Hitchhiker's Guide to Mechanobiology
Jeroen Eyckmans et al.
DEVELOPMENTAL CELL (2011)
Selective axonal growth of embryonic hippocampal neurons according to topographic features of various sizes and shapes
David Y. Fozdar et al.
INTERNATIONAL JOURNAL OF NANOMEDICINE (2011)
Role of materials surface topography on mammalian cell response
K. Anselme et al.
INTERNATIONAL MATERIALS REVIEWS (2011)
Biomaterials & scaffolds for tissue engineering
Fergal J. O'Brien
MATERIALS TODAY (2011)
Micro-/Nano-engineered Cellular Responses for Soft Tissue Engineering and Biomedical Applications
Chor Yong Tay et al.
SMALL (2011)
Topography, Cell Response, and Nerve Regeneration
Diane Hoffman-Kim et al.
ANNUAL REVIEW OF BIOMEDICAL ENGINEERING, VOL 12 (2010)
Biohybrid thin films for measuring contractility in engineered cardiovascular muscle
Patrick W. Alford et al.
BIOMATERIALS (2010)
Directed 3D cell alignment and elongation in microengineered hydrogels
Hug Aubin et al.
BIOMATERIALS (2010)
Integrated Two-Photon Polymerization With Nanoimprinting for Direct Digital Nanomanufacturing
Wande Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Nanoscale cues regulate the structure and function of macroscopic cardiac tissue constructs
Deok-Ho Kim et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2010)
Hippocampal neurons respond uniquely to topographies of various sizes and shapes
David Y. Fozdar et al.
BIOFABRICATION (2010)
Hydrogels as Extracellular Matrix Mimics for 3D Cell Culture
Mark W. Tibbitt et al.
BIOTECHNOLOGY AND BIOENGINEERING (2009)
Tissue architecture and function: dynamic reciprocity via extra- and intra-cellular matrices
Ren Xu et al.
CANCER AND METASTASIS REVIEWS (2009)
Mechanotransduction in development: a growing role for contractility
Michele A. Wozniak et al.
NATURE REVIEWS MOLECULAR CELL BIOLOGY (2009)
Scaffolding in tissue engineering: general approaches and tissue-specific considerations
B. P. Chan et al.
EUROPEAN SPINE JOURNAL (2008)
The role of matrix stiffness in regulating cell behavior
Rebecca G. Wells
HEPATOLOGY (2008)
Strategies and Applications for Incorporating Physical and Chemical Signal Gradients in Tissue Engineering
Milind Singh et al.
TISSUE ENGINEERING PART B-REVIEWS (2008)
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Shirin Ilkhanizadeh et al.
BIOMATERIALS (2007)
Microfluidic patterning for fabrication of contractile cardiac organoids
Ali Khademhosseini et al.
BIOMEDICAL MICRODEVICES (2007)
Matrix elasticity directs stem cell lineage specification
Adam J. Engler et al.
CELL (2006)
Electrospun fine-textured scaffolds for heart tissue constructs
XH Zong et al.
BIOMATERIALS (2005)
Cell and organ printing 1: Protein and cell printers
WC Wilson et al.
ANATOMICAL RECORD PART A-DISCOVERIES IN MOLECULAR CELLULAR AND EVOLUTIONARY BIOLOGY (2003)
Cardiac fibroblasts and the mechano-electric feedback mechanism in healthy and diseased hearts
A Kamkin et al.
PROGRESS IN BIOPHYSICS & MOLECULAR BIOLOGY (2003)
Anisotropic stretch-induced hypertrophy in neonatal ventricular myocytes micropatterned on deformable elastomers
SM Gopalan et al.
BIOTECHNOLOGY AND BIOENGINEERING (2003)
Cardiomyocyte cultures with controlled macroscopic anisotropy - A model for functional electrophysiological studies of cardiac muscle
N Bursac et al.
CIRCULATION RESEARCH (2002)
In vitro generation of differentiated cardiac myofibers on micropatterned laminin surfaces
TC McDevitt et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Share Paper
