Related references
Note: Only part of the references are listed.The Influence of Grain Structure on Intermetallic Compound Layer Growth Rates in Fe-Al Dissimilar Welds
Lei Xu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Indirect approaches for estimating the efficiency of the cold metal transfer welding process
Bachir Mezrag et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2018)
Effect of silicon, manganese and nickel present in iron on the intermetallic growth at iron - aluminum alloy interface
Bhupinder Dangi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Formation Procedure of Reaction Phases in Al Hot Dipping Process of Steel
Dongik Shin et al.
METALS (2018)
Cold metal transfer (CMT) technology - An overview
S. Selvi et al.
DEFENCE TECHNOLOGY (2018)
Microstructure and mechanical properties of aluminium/steel dissimilar weldments: effect of heat input
S. Madhavan et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Properties and optimization of dissimilar aluminum steel CMT welds
Erdem Unel et al.
WELDING IN THE WORLD (2017)
Growth kinetics and thickness prediction of interfacial intermetallic compounds between solid steel and molten aluminum based on thermophysical simulation in a few seconds
Jiping Rong et al.
MATERIALS CHARACTERIZATION (2017)
Influence of Filler Alloy Composition and Process Parameters on the Intermetallic Layer Thickness in Single-Sided Cold Metal Transfer Welding of Aluminum-Steel Blanks
Zahra Silvayeh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Effect of silicon on the microstructure and growth kinetics of intermetallic phases formed during hot-dip aluminizing of ferritic steel
B. Lemmens et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Multi-method identification and characterization of the intermetallic surface layers of hot-dip Al-coated steel: FeAl3 or Fe4Al13 and Fe2Al5 or Fe2Al5+x
Antoine Van Alboom et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Analysis and modeling of the growth of intermetallic compounds in aluminum-steel joints
Gang Zhang et al.
RSC ADVANCES (2017)
Atom probe tomography of intermetallic phases and interfaces formed in dissimilar joining between Al alloys and steel
B. Lemmens et al.
MATERIALS CHARACTERIZATION (2016)
Microstructure and mechanical properties of cold metal transfer welded aluminium/dual phase steel
S. Madhavan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2016)
Numerical modelling of gas metal arc joining of aluminium alloy and galvanised steels in lap joint configuration
A. Das et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2016)
On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys
H. Springer et al.
ACTA MATERIALIA (2015)
Crystallography of Fe2Al5 phase at the interface between solid Fe and liquid Al
Naoki Takata et al.
INTERMETALLICS (2015)
Growth of Fe2Al5 Phase on Pure Iron Hot-Dipped in Al-Mg-Si Alloy Melt with Fe in Solution
Naoki Takata et al.
ISIJ INTERNATIONAL (2015)
Morphology and formation of Fe-Al intermetallic layers on iron hot-dipped in Al-Mg-Si alloy melt
Naoki Takata et al.
INTERMETALLICS (2014)
Welding of Aluminum Alloys to Steels: An Overview
M. Mazar Atabaki et al.
JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION (2014)
Cold metal transfer joining aluminum alloys-to-galvanized mild steel
R. Cao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Time-Resolved X-Ray Microtomography Observation of Intermetallic Formation Between Solid Fe and Liquid Al
Guillaume Pasche et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Effect of Si on growth kinetics of intermetallic compounds during reaction between solid iron and molten aluminum
Fu-cheng Yin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
NEW FINDINGS ON THE EFFICIENCY OF GAS SHIELDED ARC WELDING
A. Haelsig et al.
WELDING IN THE WORLD (2012)
On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys
H. Springer et al.
ACTA MATERIALIA (2011)
Study of microstructure and phase evolution of hot-dipped aluminide mild steel during high-temperature diffusion using electron backscatter diffraction
Wei-Jen Cheng et al.
APPLIED SURFACE SCIENCE (2011)
Chemical Changes at the Interface Between Low Carbon Steel and an Al-Si Alloy During Solution Heat Treatment
M. Zhe et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2011)
Measuring the process efficiency of controlled gas metal arc welding processes
N. Pepe et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Kinetics of isothermal reactive diffusion between solid Fe and liquid Al
Y. Tanaka et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Influence of Filler Composition on the Microstructure and Mechanical Properties of Steel-Aluminum Joints Produced by Metal Arc Joining
Leonardo Agudo Jacome et al.
ADVANCED ENGINEERING MATERIALS (2009)
Morphology of Compounds Formed by Isothermal Reactive Diffusion between Solid Fe and Liquid Al
Yasuhiko Tanaka et al.
MATERIALS TRANSACTIONS (2009)
Growth of intermetallic layer in the aluminide mild steel during hot-dipping
Wei-Jen Cheng et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium
H. T. Zhang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2008)
Investigation of microstructure and mechanical properties of steel-aluminium joints produced by Metal arc joining
L. Agudo et al.
STEEL RESEARCH INTERNATIONAL (2008)
Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy
Rattana Borrisutthekul et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process
H. T. Zhang et al.
MATERIALS CHARACTERIZATION (2007)
Growth behavior of Fe2Al5 during reactive diffusion between Fe and Al at solid-state temperatures
D. Naoi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Intermetallic FexAly-phases in a steel/Al-alloy fusion weld
Leonardo Agudo et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Quantitative evaluation of interdiffusion in Fe2Al5 during reactive diffusion in the binary Fe-Al system
Masanori Kajihara
MATERIALS TRANSACTIONS (2006)
Reactive diffusion in the roll bonded iron-aluminum system
V Jindal et al.
MATERIALS LETTERS (2006)
Effects of carbon content of carbon steel on its dissolution into a molten aluminum alloy
SH Hwang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Effects of carbon contents in steels on alloy layer growth during hot-dip aluminum coating
T Sasaki et al.
ISIJ INTERNATIONAL (2005)
Kinetic interactions between solid iron and molten aluminium
A Bouayad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment
S Kobayashi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Microstructural analysis of interfacial reaction between molten aluminium and solid iron
HR Shahverdi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Share Paper
