Related references
Note: Only part of the references are listed.Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4V
Mozammel Mia et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)
Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques
GurRaj Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Artificial Intelligence Monitoring of Hardening Methods and Cutting Conditions and Their Effects on Surface Roughness, Performance, and Finish Turning Costs of Solid-State Recycled Aluminum Alloy 6061 Chips
Adel Taha Abbas et al.
METALS (2018)
Performance analysis of new external chip breaker for efficient machining of Inconel 718 and optimization of the cutting parameters
Bahattin Yilmaz et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Performance assessment of MQSL: Minimum quantity solid lubricant during turning of Inconel 718
A. Marques et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Mono-objective and multi-objective optimization of performance parameters in high pressure coolant assisted turning of Ti-6Al-4V
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Analyzing machining parameters for commercially puretitanium (Grade 2), cooled using minimum quantity lubrication assisted by a Ranque-Hilsch vortex tube
GurRaj Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effects of internal cooling by cryogenic on the machinability of hardened steel
A. K. M. Khabirul Islam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Sustainable machining of titanium alloys: A critical review
Kapil Gupta et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Machining comparison of aerospace materials considering minimum quantity cutting fluid: A clean and green approach
Munish Kumar Gupta et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2017)
Sustainable machining of aerospace material - Ti (grade-2) alloy: Modeling and optimization
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Tool wear characterizations in finish turning of AISI 1045 carbon steel for MQCL conditions
Radoslaw W. Maruda et al.
WEAR (2017)
Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach
Munish K. Gupta et al.
FRICTION (2017)
A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL)
Radoslaw W. Maruda et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Investigation of the influences of polycrystalline cubic boron nitride (PCBN) tool on the reduction of cutting fluid consumption and increase of machining parameters range in turning Inconel 783 using spray mode of cutting fluid with compressed air
Ahmadreza Hosseini Tazehkandi et al.
JOURNAL OF CLEANER PRODUCTION (2016)
被撤回的出版物: Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques (Retracted article. See vol. 391, 2023)
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2016)
The influence of the cooling conditions on the cutting tool wear and the chip formation mechanism
Radoslaw W. Maruda et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Cutting forces and surface roughness in wet machining of Inconel alloy 738 with coated carbide tool
Behnam Davoodi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Machining Parameters Optimization of Titanium Alloy using Response Surface Methodology and Particle Swarm Optimization under Minimum-Quantity Lubrication Environment
Munish Kumar Gupta et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Investigations on Surface Roughness Measurement in Minimum Quantity Lubrication Turning of Titanium Alloys Using Response Surface Methodology and Box-Cox Transformation
Munish Kumar Gupta et al.
JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION (2016)
Application of liquid nitrogen and spray mode of biodegradable vegetable cutting fluid with compressed air in order to reduce cutting fluid consumption in turning Inconel 740
Ahmadreza Hosseini Tazehkandi et al.
JOURNAL OF CLEANER PRODUCTION (2015)
On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706
Ahmadreza Hosseini Tazehkandr et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Sustainable machining of high temperature Nickel alloy - Inconel 718: part 2-chip breakability and optimization
Franci Pusavec et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Performance Evaluation of Coated Carbide Tool in Machining of Stainless Steel (AISI 202) under Minimum Quantity Lubrication (MQL)
J. S. Dureja et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2015)
Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning
A. Thakur et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
A Review on Minimum Quantity Lubrication for Machining Processes
Vishal S. Sharma et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique: A Review
Anuj Kumar Sharma et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Experimental investigation on removing cutting fluid from turning of Inconel 725 with coated carbide tools
Ahmadreza Hosseini Tazehkandi et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Sustainable machining of high temperature Nickel alloy - Inconel 718: part 1 - predictive performance models
Franci Pusavec et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Tool Wear Performance in Face Milling Inconel 182 using Minimum Quantity Lubrication with Different Nozzle Positions
Cheng-Dong Wang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
S. Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Dry machining of Inconel 718, workpiece surface integrity
A. Devillez et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Performance of PVD-Coated Carbide Tools When Turning Inconel 718 in Dry Machining
Gusri Akhyar Ibrahim et al.
ADVANCES IN MECHANICAL ENGINEERING (2011)
Dynamic Chip Breaker Design for Inconel 718 Using Positive Angle Tool Holder
Abdulkadir Gullu et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts
H. Z. Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Share Paper
