Related references
Note: Only part of the references are listed.Peridynamic investigation on thermal fracturing behavior of ceramic nuclear fuel pellets under power cycles
Yunteng Wang et al.
CERAMICS INTERNATIONAL (2018)
Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation
P. Areias et al.
ENGINEERING FRACTURE MECHANICS (2018)
A novel conjugated bond linear elastic model in bond-based peridynamics for fracture problems under dynamic loads
Xiaoping Zhou et al.
ENGINEERING FRACTURE MECHANICS (2018)
Peridynamic simulation of fracture in quasi brittle solids using irregular finite element mesh
Tao Ni et al.
ENGINEERING FRACTURE MECHANICS (2018)
A coupled thermo-mechanical bond-based peridynamics for simulating thermal cracking in rocks
Yunteng Wang et al.
INTERNATIONAL JOURNAL OF FRACTURE (2018)
A 3-D conjugated bond-pair-based peridynamic formulation for initiation and propagation of cracks in brittle solids
Yunteng Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Phase field modelling of crack propagation, branching and coalescence in rocks
Shuwei Zhou et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Failure characteristics of intermittent fissures under a compressive-shear test: Experimental and numerical analyses
Ri-Hong Cao et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Crack coalescence morphology in rock-like material under compression
Jooeun Lee et al.
INTERNATIONAL JOURNAL OF FRACTURE (2017)
Fully coupled poroelastic peridynamic formulation for fluid-filled fractures
Selda Oterkus et al.
ENGINEERING GEOLOGY (2017)
The mechanism of fracture coalescence in pre-cracked rock-type material with three flaws
Jooeun Lee et al.
ENGINEERING GEOLOGY (2017)
A peridynamics formulation for quasi-static fracture and contact in rock
Timon Rabczuk et al.
ENGINEERING GEOLOGY (2017)
Steiner-point free edge cutting of tetrahedral meshes with applications in fracture
P. Areias et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2017)
Peridynamic formulations enriched with bond rotation effects
Qi-zhi Zhu et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2017)
The modeling of crack propagation and coalescence in rocks under uniaxial compression using the novel conjugated bond-based peridynamics
Wang Yunteng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Direct Shear Tests of Sandstone Under Constant Normal Tensile Stress Condition Using a Simple Auxiliary Device
Duofeng Cen et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
Centroid sliding pyramid method for removability and stability analysis of fractured hard rock
Wei Wu et al.
ACTA GEOTECHNICA (2017)
A modification of the phase-field model for mixed mode crack propagation in rock-like materials
Xue Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Dual-horizon peridynamics: A stable solution to varying horizons
Huilong Ren et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Detection of material interfaces using a regularized level set method in piezoelectric structures
S. S. Nanthakumar et al.
INVERSE PROBLEMS IN SCIENCE AND ENGINEERING (2016)
Investigation on Mechanical Behaviors of Sandstone with Two Preexisting Flaws under Triaxial Compression
Da Huang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Mechanical Behavior of Brittle Rock-Like Specimens with Pre-existing Fissures Under Uniaxial Loading: Experimental Studies and Particle Mechanics Approach
Ri-hong Cao et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
The 3D Numerical Simulation for the Propagation Process of Multiple Pre-existing Flaws in Rock-Like Materials Subjected to Biaxial Compressive Loads
J. Bi et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Influence of crack surface friction on crack initiation and propagation: A numerical investigation based on extended finite element method
Yousheng Xie et al.
COMPUTERS AND GEOTECHNICS (2016)
Numerical simulation of propagation and coalescence of flaws in rock materials under compressive loads using the extended non-ordinary state-based peridynamics
Yunteng Wang et al.
ENGINEERING FRACTURE MECHANICS (2016)
Damage and fracture algorithm using the screened Poisson equation and local remeshing
P. Areias et al.
ENGINEERING FRACTURE MECHANICS (2016)
Numerical simulation of crack curving and branching in brittle materials under dynamic loads using the extended non-ordinary state-based peridynamics
Xiaoping Zhou et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
Dual-horizon peridynamics
Huilong Ren et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2016)
Numerical simulation of initiation, propagation and coalescence of cracks using the non-ordinary state-based peridynamics
Xiaoping Zhou et al.
INTERNATIONAL JOURNAL OF FRACTURE (2016)
Numerical simulation of crack propagation and coalescence in pre-cracked rock-like Brazilian disks using the non-ordinary state-based peridynamics
Xiao-Ping Zhou et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)
The Effects of Crack Openings on Crack Initiation, Propagation and Coalescence Behavior in Rock-Like Materials Under Uniaxial Compression
Hao Cheng et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Three-Dimensional Numerical Simulation on Triaxial Failure Mechanical Behavior of Rock-Like Specimen Containing Two Unparallel Fissures
Yan-Hua Huang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Fracturing patterns of rock-like materials in compression captured with peridynamics
Youn Doh Ha et al.
ENGINEERING FRACTURE MECHANICS (2015)
Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression
Ping Cao et al.
ENGINEERING GEOLOGY (2015)
A multi-dimensional space method for dynamic cracks problems using implicit time scheme in the framework of the extended finite element method
Hao Cheng et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Step-path failure of rock slopes with intermittent joints
Da Huang et al.
LANDSLIDES (2015)
Morphologic Interpretation of Rock Failure Mechanisms Under Uniaxial Compression Based on 3D Multiscale High-resolution Numerical Modeling
Gen Li et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
Numerical Simulation of Crack Growth and Coalescence in Rock-Like Materials Containing Multiple Pre-existing Flaws
X. P. Zhou et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
XLME interpolants, a seamless bridge between XFEM and enriched meshless methods
F. Amiri et al.
COMPUTATIONAL MECHANICS (2014)
An Experimental Study of Crack Coalescence Behaviour in Rock-Like Materials Containing Multiple Flaws Under Uniaxial Compression
X. P. Zhou et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
Finite strain fracture of 2D problems with injected anisotropic softening elements
P. Areias et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Element-wise fracture algorithm based on rotation of edges
P. Areias et al.
ENGINEERING FRACTURE MECHANICS (2013)
Finite strain fracture of plates and shells with configurational forces and edge rotations
P. Areias et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2013)
Numerical study on coalescence of two pre-existing coplanar flaws in rock
Louis Ngai Yuen Wong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Discretized peridynamics for linear elastic solids
Wenyang Liu et al.
COMPUTATIONAL MECHANICS (2012)
A phase-field description of dynamic brittle fracture
Michael J. Borden et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)
Frictional crack initiation and propagation analysis using the numerical manifold method
Zhijun Wu et al.
COMPUTERS AND GEOTECHNICS (2012)
A 3D distinct lattice spring model for elasticity and dynamic failure
Gao-Feng Zhao et al.
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2011)
Footwall slope stability analysis with the numerical manifold method
Y. J. Ning et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
Numerical simulation of compressive failure of heterogeneous rock-like materials using SPH method
G. W. Ma et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression
Heekwang Lee et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
A simple and robust three-dimensional cracking-particle method without enrichment
Timon Rabczuk et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations
C. Miehe et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)
An adaptive dynamic relaxation method for quasi-static simulations using the peridynamic theory
B. Kilic et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2010)
Considerations of the discontinuous deformation analysis on wave propagation problems
Jiong Gu et al.
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2009)
Crack coalescence in specimens with open and closed flaws: A comparison
C. H. Park et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)
Crack Coalescence in Molded Gypsum and Carrara Marble: Part 1. Macroscopic Observations and Interpretation
L. N. Y. Wong et al.
ROCK MECHANICS AND ROCK ENGINEERING (2009)
Discontinuous modelling of shear bands using adaptive meshfree methods
T. Rabczuk et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2008)
DEM analysis of the crack propagation in brittle clays under uniaxial compression tests
Luis F. Vesga et al.
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2008)
Experimental investigation on strength and failure behavior of pre-cracked marble under conventional triaxial compression
S. Q. Yang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Peridynamic states and constitutive modeling
S. A. Silling et al.
JOURNAL OF ELASTICITY (2007)
A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics
Timon Rabczuk et al.
COMPUTATIONAL MECHANICS (2007)
A meshfree method based on the local partition of unity for cohesive cracks
Timon Rabczuk et al.
COMPUTATIONAL MECHANICS (2007)
A simplified mesh-free method for shear bands with cohesive surfaces
T. Rabczuk et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2007)
A three-dimensional large deformation meshfree method for arbitrary evolving cracks
T. Rabczuk et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)
Strength and failure modes of rock mass models with non-persistent joints
M. Prudencio et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2007)
A meshfree method based on the peridynamic model of solid mechanics
SA Silling et al.
COMPUTERS & STRUCTURES (2005)
A new quasi-continuum constitutive model for crack growth in an isotropic solid
ZN Zhang et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2005)
Cracking particles: a simplified meshfree method for arbitrary evolving cracks
T Rabczuk et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)
Extended finite element method for cohesive crack growth
N Moës et al.
ENGINEERING FRACTURE MECHANICS (2002)
The initiation of secondary cracks in compression
A Bobet
ENGINEERING FRACTURE MECHANICS (2000)
Reformulation of elasticity theory for discontinuities and long-range forces
SA Silling
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
Share Paper
