Routing and wavelength assignment vs. EDFA reliability performance in optical backbone networks: An operational cost perspective

A failure in optical backbone network can cause tremendous consequences as a substantial number of connections often each carrying a large amount of data can be interrupted. Therefore, high reliability performance is essential for the network operators. Many existing works that aim at improving network reliability performance implicitly assume that the lifetime of devices is constant and independent of the traffic load. However, the reliability performance of a device is related to its occupancy. For example, the failure rate of erbium doped fiber amplifier (EDFA) can be expressed as a function of the number of amplified wavelengths. On the other hand, the choice of routing and wavelength assignment (RWA) algorithm impacts the link load and, as a consequence, can influence the number of EDFA failures in the network. In this paper we examine how RWA can impact the failure reparation related network operational costs. Several types of RWA approaches are considered, namely load-balancing, energy-awareness, and reliability-awareness. Among all the considered RWA algorithms, the reliability-aware RWA (RA-RWA) approach leverages on EDFA reliability profile to reduce the number of EDFA failures in the network and the related operational costs. The simulation results show that the RWA algorithm impacts in a significant way the operational costs caused by EDFA failures. The cost associated with reparation of an EDFA decreases by 7.8% (in case of RA-RWA) and increases by up to 40% (in case of a load-balancing approach) compared to the classical Shortest Path (SP) approach. Moreover, the cost caused by connection rerouting due to link unavailability triggered by EDFA failure exhibits a 20% decrease (RA-RWA) and up to 94% increase (energy-aware algorithm). We also analyze some key network performance metrics that may be affected by RWA, including blocking probability, link occupancy distribution, and path length.