Pore size fractal dimension for characterizing Au/TiO2 catalyst

The quality and assessment of a catalyst can be documented in detail by the application of pore size. This research aims to calculate fractal dimension from the relationship among pore size, maximum pore size and wetting phase saturation and to confirm it by the fractal dimension derived from the relationship among the ratio between surface area per unit pore volume, entry surface area per unit pore volume and wetting phase saturation. In this research, pore size was measured on Au/TiO2 using Brunauer-Emmett-Teller (BET) surface area. Two equations for calculating the fractal dimensions have been employed. The first one describes the functional relationship between wetting phase saturation, pore size, maximum pore size and fractal dimension. The second equation implies to the wetting phase saturation as a function of surface area per unit pore volume, entry surface area per unit pore volume and the fractal dimension. Two procedures for obtaining the fractal dimension have been utilized. The first procedure was done by plotting the logarithm of the ratio between pore size and maximum pore size versus logarithm wetting phase saturation. The positive slope of the first procedure = 3 - Df (fractal dimension). The second procedure for obtaining the fractal dimension was determined by plotting the logarithm of the ratio between surface area per unit pore volume, entry surface area per unit pore volume versus the logarithm of wetting phase saturation. The negative slope of the second procedure = Df - 3. It was found that the plasma + thermally treated Au/TiO2 has the highest fractal dimension value owing to possibility of having holes and channels. The results also show similarity between pore size fractal dimension and surface area per unit pore volume fractal dimension. In our case, as conclusions, the higher the fractal dimension, the better the catalytic activity.