Related references
Note: Only part of the references are listed.The Effects of Antimony Addition on the Microstructural, Mechanical, and Thermal Properties of Sn-3.0Ag-0.5Cu Solder Alloy
Phairote Sungkhaphaitoon et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Shear strength and fracture behavior of reflowed Sn3.0Ag0.5Cu/Cu solder joints under various strain rates
Xiaowu Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The Role of Ni-P Coating Structure on Fly Ash Cenospheres in the Formation of Magnesium Matrix Composites
Katarzyna N. Braszczynska-Malik et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Effects of Under Bump Metallurgy (UBM) Materials on the Corrosion of Electroless Nickel Films
Jin Yu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Effect of surfactants on the coating properties and corrosion behaviour of Ni-P-nano-TiO2 coatings
T. R. Tamilarasan et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Oxidation behavior of electroless Ni-P, Ni-B and Ni-W-B coatings deposited on steel substrates
Sinem Eraslan et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Quantifying the dependence of Ni(P) thickness in ultrathin-ENEPIG metallization on the growth of Cu-Sn intermetallic compounds in soldering reaction
Cheng-Ying Ho et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Pronounced effects of Ni(P) thickness on the interfacial reaction and high impact resistance of the solder/Au/Pd(P)/Ni(P)/Cu reactive system
C. E. Ho et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Employment of a bi-layer of Ni(P)/Cu as a diffusion barrier in a Cu/Sn/Cu bonding structure for three-dimensional interconnects
Byunghoon Lee et al.
ACTA MATERIALIA (2013)
Effect of current density and electrolyte pH on microstructure of Mn-Cu electroplated coatings
Maryam Haerifar et al.
APPLIED SURFACE SCIENCE (2013)
Growth behaviors of intermetallic compounds at Sn-3Ag-0.5Cu/Cu interface during isothermal and non-isothermal aging
Jun Shen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Microstructural variation and high-speed impact responses of Sn-3.0Ag-0.5Cu/ENEPIG solder joints with ultra-thin Ni-P deposit
Cheng-Ying Ho et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Reliability evaluation on a submicron Ni(P) thin film for lead-free soldering
C. E. Ho et al.
THIN SOLID FILMS (2013)
Capillary Driven Molten Metal Flow over Topographically Complex Substrates
Wen Liu et al.
LANGMUIR (2011)
Comparative study between Sn37Pb and Sn3Ag0.5Cu soldering with Au/Pd/Ni(P) tri-layer structure
S. P. Peng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Detailed Phase Evolution of a Phosphorous-Rich Layer and Formation of the Ni-Sn-P Compound in Sn-Ag-Cu/Electroplated Ni-P Solder Joints
Yung-Chi Lin et al.
JOURNAL OF ELECTRONIC MATERIALS (2010)
Influence of Palladium Thickness on the Soldering Reactions Between Sn-3Ag-0.5Cu and Au/Pd(P)/Ni(P) Surface Finish
W. H. Wu et al.
JOURNAL OF ELECTRONIC MATERIALS (2010)
Uncovering the driving force for massive spalling in the Sn-Cu/Ni system
W. M. Chen et al.
SCRIPTA MATERIALIA (2010)
Wetting and Roughness
David Quéré
Annual Review of Materials Research (2008)
Effect of thermal aging on the interfacial structure of SnAgCu solder joints on Cu
Weiqun Peng et al.
MICROELECTRONICS RELIABILITY (2007)
Suppressing Ni-Sn-P growth in SnAgCu/Ni-P solder joints
Yung-Chi Lin et al.
SCRIPTA MATERIALIA (2007)
Effect of phosphorus content on Cu/Ni-P/Sn-3.5Ag solder joint strength after multiple reflows
Zhong Chen et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Microstructural analysis of lead-free solder alloys
Vineet Kumar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Phase transformation of the phosphorus-rich layer in SnAgCu/Ni-P solder joints
YC Lin et al.
SCRIPTA MATERIALIA (2006)
Metallurgy and kinetics of liquid-solid interfacial reaction during lead-free soldering
J Liang et al.
MATERIALS TRANSACTIONS (2006)
Phase formation between lead-free Sn-Ag-Cu solder and Ni(P)/Au finishes
V Vuorinen et al.
JOURNAL OF APPLIED PHYSICS (2006)
Effect of aging conditions on interfacial reaction and mechanical joint strength between Sn-3.0Ag-0.5Cu solder and Ni-PUBM
DG Kim et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2005)
Effect of plating current density and annealing on impurities in electroplated Cu film
CW Liu et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2005)
Interfacial reactions and growth kinetics for intermetallic compound layer between In-48Sn solder and bare Cu substrate
DG Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Electromigration in flip chip solder bump of 97Pb-3Sn/37Pb-63Sn combination structure
JW Nah et al.
ACTA MATERIALIA (2004)
Solid-state intermetallic compound layer growth between copper and 95.5Sn-3.9Ag-0.6Cu solder
PT Vianco et al.
JOURNAL OF ELECTRONIC MATERIALS (2004)
Effect of isothermal aging on intermetallic compound layer growth at the interface between Sn-3.5Ag-0.75Cu solder and Cu substrate
JW Yoon et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Influence of interfacial intermetallic compound on fracture behavior of solder joints
HT Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Study of interaction between Cu-Sn and Ni-Sn interfacial reactions by Ni-Sn3.5Ag-Cu sandwich structure
SJ Wang et al.
JOURNAL OF ELECTRONIC MATERIALS (2003)
Retarding growth of Ni3P crystalline layer in Ni(P) substrate by reacting with Cu-bearing Sn(Cu) solders
SJ Wang et al.
SCRIPTA MATERIALIA (2003)
Investigation of interfacial reaction between Sn-Ag eutectic solder and Au/Ni/Cu/Ti thin film metallization
JY Park et al.
JOURNAL OF ELECTRONIC MATERIALS (2001)
Tin-lead (SnPb) solder reaction in flip chip technology
KN Tu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2001)
Share Paper
