Related references
Note: Only part of the references are listed.Self-Reinforcement of Polypropylene Lid-Shaped Samples Induced by Increasing Shish-Kebab Content: Practical Application of Vibration Injection Technology
YingXiong Wang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Processing-Nanostructure-Property Relationships of All-Polyethylene Composites Reinforced by Flow-Induced Oriented Crystallization of UHMWPE
Fan Zhong et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
All-polyethylene composites reinforced via extended-chain UHMWPE nanostructure formation during melt processing
Fan Zhong et al.
POLYMER (2018)
A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy
S. R. Naqvi et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Wear resistant all-PE single-component composites via 1D nanostructure formation during melt processing
Timo Hees et al.
POLYMER (2018)
Catalytic pyrolysis of waste plastics using staged catalysis for production of gasoline range hydrocarbon oils
Devy K. Ratnasari et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)
A review of optimisation techniques used in the composite recycling area: State-of-the-art and steps towards a research agenda
Ying Liu et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Towards zero waste manufacturing: A multidisciplinary review
Sunpreet Singh et al.
JOURNAL OF CLEANER PRODUCTION (2017)
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
S. M. Al-Salem et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2017)
Tailored Nanostructured HDPE Wax/UHMWPE Reactor Blends as Additives for Melt-Processable All-Polyethylene Composites and in Situ UHMWPE Fiber Reinforcement
Daniel Hofmann et al.
MACROMOLECULES (2017)
River plastic emissions to the world's oceans
Laurent C. M. Lebreton et al.
NATURE COMMUNICATIONS (2017)
Nanocellulose Aerogels for Supporting Iron Catalysts and In Situ Formation of Polyethylene Nanocomposites
Timo Hees et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites
Markus Stuerzel et al.
CHEMICAL REVIEWS (2016)
A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems
Patrizia Ghisellini et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Heterogeneous Distribution of Entanglements in a Nonequilibrium Polymer Melt of UHMWPE: Influence on Crystallization without and with Graphene Oxide
Kangsheng Liu et al.
MACROMOLECULES (2016)
Nanostructured Polyethylene Reactor Blends with Tailored Trimodal Molar Mass Distributions as Melt-Processable All-Polymer Composites
Markus Stuerzel et al.
MACROMOLECULES (2016)
Multisite catalyst mediated polymer nanostructure formation and self-reinforced polyethylene reactor blends with improved toughness/stiffness balance
Markus Stuerzel et al.
POLYMER (2016)
Bidimensional ZSM-5 zeolites probed as catalysts for polyethylene cracking
A. Peral et al.
CATALYSIS SCIENCE & TECHNOLOGY (2016)
A concise review on smart polymers for controlled drug release
Arezou Aghabegi Moghanjoughi et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2016)
Review of high thermal conductivity polymer dielectrics for electrical insulation
Meng Xiao et al.
HIGH VOLTAGE (2016)
Nanomaterials for Functional Textiles and Fibers
Pedro J. Rivero et al.
NANOSCALE RESEARCH LETTERS (2015)
Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties
Geraldine Oliveux et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Nanomaterials for Functional Textiles and Fibers
Pedro J. Rivero et al.
NANOSCALE RESEARCH LETTERS (2015)
A Hemi-metallocene Chromium Catalyst with Trimethylaluminum-Free Methylaluminoxane for the Synthesis of Disentangled Ultra-High Molecular Weight Polyethylene
Dario Romano et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2015)
Photocatalytic Conversion of CO2 into Renewable Hydrocarbon Fuels: State-of-the-Art Accomplishment, Challenges, and Prospects
Wenguang Tu et al.
ADVANCED MATERIALS (2014)
Post-Metallocenes in the Industrial Production of Polyolefins
Moritz C. Baier et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Recycling of Polymers: A Review
Igor A. Ignatyev et al.
CHEMSUSCHEM (2014)
Single-polymer composites (SPCs): Status and future trends
J. Karger-Kocsis et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Two-site silica supported Fe/Cr catalysts for tailoring bimodal polyethylenes with variable content of UHMWPE
Alexander Kurek et al.
JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL (2014)
Graphene-Supported Dual-Site Catalysts for Preparing Self-Reinforcing Polyethylene Reactor Blends Containing UHMWPE Nanoplatelets and in Situ UHMWPE Shish-Kebab Nanofibers
Markus Stuerzel et al.
MACROMOLECULES (2014)
Plastic Pollution in the World's Oceans: More than 5 Trillion Plastic Pieces Weighing over 250,000 Tons Afloat at Sea
Marcus Eriksen et al.
PLOS ONE (2014)
Recent advances in the photocatalytic conversion of carbon dioxide to fuels with water and/or hydrogen using solar energy and beyond
Yasuo Izumi
COORDINATION CHEMISTRY REVIEWS (2013)
Immobilisation of homogeneous olefin polymerisation catalysts. Factors influencing activity and stability
John R. Severn et al.
DALTON TRANSACTIONS (2013)
Status and perspectives of CO2 conversion into fuels and chemicals by catalytic, photocatalytic and electrocatalytic processes
Evgenii V. Kondratenko et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Development and characterisation of injection moulded, all-polypropylene composites
A. Kmetty et al.
EXPRESS POLYMER LETTERS (2013)
Heterogeneous Ziegler-Natta, metallocene, and post-metallocene catalysis: Successes and challenges in industrial application
Markus Gahleitner et al.
MRS BULLETIN (2013)
Green Polymer Chemistry and Bio-based Plastics: Dreams and Reality
Rolf Muelhaupt
MACROMOLECULAR CHEMISTRY AND PHYSICS (2013)
Silica Nanofoam (NF) Supported Single- and Dual-Site Catalysts for Ethylene Polymerization with Morphology Control and Tailored Bimodal Molar Mass Distributions
Alexander Kurek et al.
MACROMOLECULES (2013)
Effect of processing parameters on the morphology development during extrusion of polyethylene tape: An in-line small-angle X-ray scattering (SAXS) study
E. L. Heeley et al.
POLYMER (2013)
Self-extinguishing polypropylene with a mass fraction of 9% intumescent additive II - Influence of highly oriented fibres
Katalin Bocz et al.
POLYMER DEGRADATION AND STABILITY (2013)
Improving the performance of a catalytic system for the synthesis of ultra high molecular weight polyethylene with a reduced number of entanglements
Sara Ronca et al.
ADVANCES IN POLYMER TECHNOLOGY (2012)
Novel anticorrosion coatings prepared from polyaniline/graphene composites
Chi-Hao Chang et al.
CARBON (2012)
Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed
Gorka Elordi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Morphologies and Mechanical Properties of High-Density Polyethylene Induced by the Addition of Small Amounts of Both Low- and High-Molecular-Weight Polyolefin under Shear Stress Applied by Dynamic Packing Injection Molding
Jianguo Cao et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2012)
Tailoring molecular structure via nanoparticles for solvent-free processing of ultra-high molecular weight polyethylene composites
Sara Ronca et al.
POLYMER (2012)
Development of flame retarded self-reinforced composites from automotive shredder plastic waste
Katalin Bocz et al.
POLYMER DEGRADATION AND STABILITY (2012)
Development of self-reinforced polymer composites
Chengcheng Gao et al.
PROGRESS IN POLYMER SCIENCE (2012)
Pyrolysis of polyolefins for increasing the yield of monomers' recovery
Pawel J. Donaj et al.
WASTE MANAGEMENT (2012)
Developing Advanced Catalysts for the Conversion of Polyolefinic Waste Plastics into Fuels and Chemicals
D. P. Serrano et al.
ACS CATALYSIS (2012)
A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research
Yun Wang et al.
APPLIED ENERGY (2011)
FI Catalysts for Olefin Polymerization-A COrnprehensive Treatment
Haruyuki Makio et al.
CHEMICAL REVIEWS (2011)
Biomimicry in textiles: past, present and potential. An overview
Leslie Eadie et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2011)
Unprecedented High-Modulus High-Strength Tapes and Films of Ultrahigh Molecular Weight Polyethylene via Solvent-Free Route
Sanjay Rastogi et al.
MACROMOLECULES (2011)
Heterogeneity in the Distribution of Entanglement Density during Polymerization in Disentangled Ultrahigh Molecular Weight Polyethylene
Anurag Pandey et al.
MACROMOLECULES (2011)
Microplastics as contaminants in the marine environment: A review
Matthew Cole et al.
MARINE POLLUTION BULLETIN (2011)
Recent advances in polyolefin technology
Jinliang Qiao et al.
POLYMER CHEMISTRY (2011)
Biomass to liquid: A prospective challenge to research and development in 21st century
Pravat K. Swain et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Toward Solar Fuels: Photocatalytic Conversion of Carbon Dioxide to Hydrocarbons
Somnath C. Roy et al.
ACS NANO (2010)
STUDIES ON STRUCTURE AND PROPERTIES OFiPP INJECTION-MOLDED IN LOW FREQUENCY VIBRATION FIELD
You-bing LI et al.
ACTA POLYMERICA SINICA (2010)
How copper catalyzes the electroreduction of carbon dioxide into hydrocarbon fuels
Andrew A. Peterson et al.
ENERGY & ENVIRONMENTAL SCIENCE (2010)
Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers
Michaelangelo D. Tabone et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2010)
FI Catalysts: Unique Olefin Polymerization Catalysis for Formation of Value-added Olefin-based Materials
Yasushi Nakayama et al.
JOURNAL OF THE JAPAN PETROLEUM INSTITUTE (2010)
Mesoporous Silica Supported Multiple Single-Site Catalysts and Polyethylene Reactor Blends with Tailor-Made Trimodal and Ultra-Broad Molecular Weight Distributions
Alexander Kurek et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2010)
Control of Structural Morphology in Shear-Induced Crystallization of Polymers
Oleksandr O. Mykhaylyk et al.
MACROMOLECULES (2010)
Molar Mass and Molecular Weight Distribution Determination Of UHMWPE Synthesized Using a Living Homogeneous Catalyst
Saeid Talebi et al.
MACROMOLECULES (2010)
Turning carbon dioxide into fuel
Z. Jiang et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2010)
Supported hybrid early and late transition metal catalysts for the synthesis of polyethylene with tailored molecular weight and chemical composition distributions
Yiyoung Choi et al.
POLYMER (2010)
Thermolysis of waste plastics to liquid fuel A suitable method for plastic waste management and manufacture of value added products-A world prospective
Achyut K. Panda et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Self-reinforced polymeric materials: A review
Akos Kmetty et al.
PROGRESS IN POLYMER SCIENCE (2010)
Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective
David Lazarevic et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
Development and Application of FI Catalysts for Olefin Polymerization: Unique Catalysis and Distinctive Polymer Formation
Haruyuki Makio et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Molecular Approaches to the Photocatalytic Reduction of Carbon Dioxide for Solar Fuels
Amanda J. Morris et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Tensile mechanical and perforation impact behavior of all-PP composites containing random PP copolymer as matrix and stretched PP homopolymer as reinforcement: Effect of β nucleation of the matrix
T. N. Abraham et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Development of woven fabric reinforced all-polypropylene composites with beta nucleated homo- and copolymer matrices
Andras Izer et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Overview of fuel properties of biomass fast pyrolysis oils
Lu Qiang et al.
ENERGY CONVERSION AND MANAGEMENT (2009)
The effect of processing conditions on the mechanical properties and thermal stability of highly oriented PP tapes
B. Alcock et al.
EUROPEAN POLYMER JOURNAL (2009)
Chemical Recycling off Carbon Dioxide to Methanol and Dimethyl Ether: From Greenhouse Gas to Renewable, Environmentally Carbon Neutral Fuels and Synthetic Hydrocarbons
George A. Olah et al.
JOURNAL OF ORGANIC CHEMISTRY (2009)
RECENT TECHNICAL ADVANCES IN POLYPROPYLENE
Gabriele Mei et al.
JOURNAL OF PLASTIC FILM & SHEETING (2009)
Plastics recycling: challenges and opportunities
Jefferson Hopewell et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Plastics, the environment and human health: current consensus and future trends
Richard C. Thompson et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Accumulation and fragmentation of plastic debris in global environments
David K. A. Barnes et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Effect of low-frequency melt vibration on HDPE morphology
Youbing Li et al.
POLYMER INTERNATIONAL (2009)
Impact resistance of all-polypropylene composites composed of alpha and beta modifications
Tamas Barany et al.
POLYMER TESTING (2009)
Mechanical Properties and Crystal Structure of HDPE Induced by Small Amount of High-molecular-weight and Low-molecular-weight Polyethylene under Shear Stress Produced by Dynamic Packing Injection Molding
Zhanchun Chen et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2009)
Recycling and recovery routes of plastic solid waste (PSW): A review
S. M. Al-Salem et al.
WASTE MANAGEMENT (2009)
Biofuels and Biomass-To-Liquid Fuels in the Biorefinery: Catalytic Conversion of Lignocellulosic Biomass using Porous Materials
Michael Stocker
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)
Fischer-Tropsch catalysts for the Biomass-to Liquid process
Eric van Steen et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2008)
Catalytic and thermal cracking of selected polyolefins
Jozef Mikulec et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2008)
The effect of temperature and strain rate on the impact performance of recyclable all-polypropylene composites
B. Alcock et al.
COMPOSITES PART B-ENGINEERING (2008)
The use of interleaved films for optimising the production and properties of hot compacted, self reinforced polymer composites
P. J. Hine et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Synthetic polymers in the marine environment: A rapidly increasing, long-term threat
Charles James Moore
ENVIRONMENTAL RESEARCH (2008)
A comparison of The Limits to Growth with 30 years of reality
Graham M. Turner
GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2008)
Morphologies and mechanical properties of HDPE induced by small amount of high-molecular-weight polyolefin and shear stress produced by dynamic packing injection molding
Zhanchun Chen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
The specific work of flow as a criterion for orientation in polymer crystallization
Oleksandr O. Mykhaylyk et al.
MACROMOLECULES (2008)
Shish-kebab of polyolefin by melt manipulation strategy in injection-molding: A convenience pathway from fundament to application
Ke Wang et al.
POLYMER (2008)
Study on the improvement of crystallization in HDPE induced by high-molecular-weight polyethylene through dynamic packing injection molding
C. Deng et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008)
Self-reinforced isotactic polypropylene prepared by melt vibration injection molding
Li Youbing et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2008)
Flexural creep Behavior of unidirectional and cross-ply all-poly(propylene) (PURE®) composites
Kaushik Banik et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2007)
Catalytic degradation of polyolefins over hexagonal mesoporous silica: Effect of aluminum addition
Soamwadee Chaianansutcharit et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2007)
The effect of temperature and strain rate on the mechanical properties of highly oriented polypropylene tapes and all-polypropylene composites
B. Alcock et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
All-PP composites (PURE®) with unidirectional and cross-ply lay-ups: dynamic mechanical thermal analysis
T. Abraham et al.
EXPRESS POLYMER LETTERS (2007)
The chemistry and applications of antimicrobial polymers: A state-of-the-art review
El-Refaie Kenawy et al.
BIOMACROMOLECULES (2007)
Bis(imino)pyridines: Surprisingly reactive ligands and a gateway to new families of catalysts
Vernon C. Gibson et al.
CHEMICAL REVIEWS (2007)
Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable all-polypropylene composites
B. Alcock et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Ethylene polymerization with combinations of early- and late-transition metal catalysts immobilized on MgCl2 supports
John C. Chadwick et al.
MACROMOLECULAR SYMPOSIA (2007)
High performance self-reinforced polypropylene composites
Tamas Barany et al.
MATERIALS SCIENCE, TESTING AND INFORMATICS III (2007)
The mechanical properties of woven tape all-polypropylene composites
B. Alcock et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Living olefin polymerization and block copolymer formation with FI catalysts
Atsushi Sakuma et al.
POLYMER JOURNAL (2007)
Formation of entanglements in initially disentangled polymer melts
Dirk R. Lippits et al.
MACROMOLECULES (2006)
Constrained geometry complexes - Synthesis and applications
Holger Braunschweig et al.
COORDINATION CHEMISTRY REVIEWS (2006)
The hierarchy structure and orientation of high density polyethylene obtained via dynamic packing injection molding
Wen Cao et al.
POLYMER (2006)
Low velocity impact performance of recyclable all-polypropylene composites
B. Alcock et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
A review of the aqueous electrochemical reduction of CO2 to hydrocarbons at copper
M. Gattrell et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2006)
Shear-induced crystallization in blends of model linear and long-chain branched hydrogenated polybutadienes
Ellen L. Heeley et al.
MACROMOLECULES (2006)
Pyrolysis of wood/biomass for bio-oil: A critical review
Dinesh Mohan et al.
ENERGY & FUELS (2006)
Advances in Ziegler-Natta catalysts for polypropylene
A Ferraro et al.
KINETICS AND CATALYSIS (2006)
The path forward for biofuels and biomaterials
AJ Ragauskas et al.
SCIENCE (2006)
Self-toughening and self-reinforcing injection-molded isotactic polypropylene via midfrequency vibration field
Youbing Li et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2006)
The mechanical properties of unidirectional all-polypropylene composites
B Alcock et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Flow-induced shish-kebab precursor structures in entangled polymer melts
RH Somani et al.
POLYMER (2005)
Catalytic cracking of HDPE over hybrid zeolitic-mesoporous materials
RA García et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2005)
Life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes
F Perugini et al.
ENVIRONMENTAL PROGRESS (2005)
Catalytic degradation of high density polyethylene over microporous and mesoporous materials
LB Pierella et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2005)
Effect of melt vibration on mechanical properties of injection molding and rheology
Y Li et al.
JOURNAL OF MACROMOLECULAR SCIENCE-PHYSICS (2005)
Immobilization and activation of a single-site chromium catalyst for ethylene polymerization using MgCl2/AlRn(OEt)3-n supports
JR Severn et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Alternative polymer systems for proton exchange membranes (PEMs)
MA Hickner et al.
CHEMICAL REVIEWS (2004)
Disentangled state in polymer melts; a route to ultimate physical and mechanical properties
S Rastogi et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2003)
Chemotherapeutic engineering: Application and further development of chemical engineering principles for chemotherapy of cancer and other diseases
SS Feng et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Structural development of HDPE in injection molding
RA Sousa et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Corrosion protection by multilayered conducting polymer coatings
CK Tan et al.
CORROSION SCIENCE (2003)
The ethylene polymerization with Ziegler catalysts: Fifty years after the discovery
LL Bohm
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2003)
Life cycle assessment of a plastic packaging recycling system
U Arena et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2003)
The environmental effect of reusing and recycling a plastic-based packaging system
S Ross et al.
JOURNAL OF CLEANER PRODUCTION (2003)
A general review of polymeric insulation for use in HVDC cables
TL Hanley et al.
IEEE ELECTRICAL INSULATION MAGAZINE (2003)
Advances in non-metallocene olefin polymerization catalysis
VC Gibson et al.
CHEMICAL REVIEWS (2003)
Interlocking shish-kebab morphology in polybutene-1
G Kalay et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2002)
The pollution of the marine environment by plastic debris: a review
JGB Derraik
MARINE POLLUTION BULLETIN (2002)
Enhancement in micro-fatigue resistance of UHMWPE and HDPE processed by SCORIM
AY Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Co-pyrolysis of wood biomass and synthetic polymer mixtures. Part 1: influence of experimental conditions on the evolution of solids, liquids and gases
VI Sharypov et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2002)
Fiber-reinforced polymer composites for construction-state-of-the-art review
CE Bakis et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Application of conducting polymers to biosensors
M Gerard et al.
BIOSENSORS & BIOELECTRONICS (2002)
Palladium catalysed copolymerisation of ethene with alkylacrylates: polar comonomer built into the linear polymer chain
E Drent et al.
CHEMICAL COMMUNICATIONS (2002)
Influence of the operating variables on the catalytic conversion of a polyolefin mixture over HMCM-41 and nanosized HZSM-5
J Aguado et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)
Recent developments in olefin polymerizations with transition metal catalysts
Y Imanishi et al.
PROGRESS IN POLYMER SCIENCE (2001)
Technology: driving force behind innovation and growth of polyolefins
P Galli et al.
PROGRESS IN POLYMER SCIENCE (2001)
Selectivity in propene polymerization with metallocene catalysts
L Resconi et al.
CHEMICAL REVIEWS (2000)
Late-metal catalysts for ethylene homo- and copolymerization
SD Ittel et al.
CHEMICAL REVIEWS (2000)
Effect of the nature of metallocene complexes of group IV metals on their performance in catalytic ethylene and propylene polymerization
HG Alt et al.
CHEMICAL REVIEWS (2000)
Precise control of polyolefin stereochemistry using single-site metal catalysts
GW Coates
CHEMICAL REVIEWS (2000)