Changes in sorption and electrical properties of wood caused by fungal decay

As wet wood is prone to degradation by wood-destroying fungi, the monitoring of the moisture content (MC) of wood can be used to quantify the risk of fungal infestation. Fungal decay alters the sorption and electrical conductivity of wood, and thus the goal of the present study was to measure the electrical resistance (R) of wood after fungal decay as a function of MC. Scots pine sapwood (Pinus sylvestris L.) and European beech wood (Fagus sylvatica L.) were submitted to decay by Coniophora puteana (a brown rot fungus, BR) and Trametes versicolor (a white rot fungus, WR) and the mass loss (ML) due to the fungal metabolism was measured. The sorption isotherms were determined by dynamic vapor sorption (DVS), and comparative gravimetric- and R-based MC measurements were conducted. BR and WR reduced the sorption of wood and lowered its R in the hygroscopic range, where the decay led to an overestimation of wood MC, while wood MC was dramatically underestimated above fiber saturation (FS). Specimens showed an MC well above FS if measured directly after harvesting and an increased R compared to undecayed wood at a given MC. BR-decayed specimens were dried and rewetted, and such specimens showed an elevated R beyond FS. In the case of WR-decayed wood, the R was reduced at a given MC.