Related references
Note: Only part of the references are listed.Role of Electron-and Hole-Collecting Buffer Layers on the Stability of Inverted Polymer: Fullerene Photovoltaic Devices
Eszter Voroshazi et al.
IEEE JOURNAL OF PHOTOVOLTAICS (2014)
Efficiency and Air-Stability Improvement of Flexible Inverted Polymer Solar Cells Using ZnO/Poly(ethylene glycol) Hybrids as Cathode Buffer Layers
Ting Hu et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Solution-Processed Hybrid Cathode Interlayer for Inverted Organic Solar Cells
Yulei Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt
Zhigang Yin et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Electrospun ZnO Nanowire Plantations in the Electron Transport Layer for High-Efficiency Inverted Organic Solar Cells
Naveen Kumar Elumalai et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Solution-Processed LiF-Doped ZnO Films for High Performance Low Temperature Field Effect Transistors and Inverted Solar Cells
Jingjing Chang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Annealing of P3HT:PCBM Blend Film-The Effect on Its Optical Properties
Annie Ng et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
On the spatial inhomogeneity of charge generation and collection in inverted all polymer solar cells
A. Perulli et al.
APPLIED PHYSICS LETTERS (2013)
Biopolymer as an electron selective layer for inverted polymer solar cells
Mein Jin Tan et al.
APPLIED PHYSICS LETTERS (2013)
Optimized inverted polymer solar cells incorporating Cs2CO3-doped C60 as electron transport layer
A. Barbot et al.
APPLIED PHYSICS LETTERS (2013)
Self-Organized Hole Transport Layers Based on Polythiophene Diblock Copolymers for Inverted Organic Solar Cells with High Efficiency
Kai Yao et al.
CHEMISTRY OF MATERIALS (2013)
Life cycle analyses of organic photovoltaics: a review
Sebastien Lizin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Performance Comparison of Conventional and Inverted Organic Bulk Heterojunction Solar Cells From Optical and Electrical Aspects
Dazheng Chen et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2013)
Low-cost upscaling compatibility of five different ITO-free architectures for polymer solar cells
Dechan Angmo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
N-type doping and thermoelectric properties of co-sublimed cesium-carbonate-doped fullerene
A. Barbot et al.
JOURNAL OF MATERIALS SCIENCE (2013)
UV-Ozone Treatment on Cs2CO3 Interfacial Layer for the Improvement of Inverted Polymer Solar Cells
Yusheng Xin et al.
JOURNAL OF NANOMATERIALS (2013)
High-Efficiency Polymer Solar Cells via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer as a Cathode Interlayer
Shengjian Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Formation of Nanostructured Fullerene Interlayer through Accelerated Self-Assembly and Cross-Linking of Trichlorosilane Moieties Leading to Enhanced Efficiency of Photovoltaic Cells
Wei-Wei Liang et al.
MACROMOLECULES (2013)
Effect of sol-gel derived ZnO annealing rate on light-trapping in inverted polymer solar cells
Xuan Yu et al.
MATERIALS LETTERS (2013)
Simultaneous improvements in power conversion efficiency and operational stability of polymer solar cells by interfacial engineering
Naveen Kumar Elumalai et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Enhancing the stability of polymer solar cells by improving the conductivity of the nanostructured MoO3 hole-transport layer
Naveen Kumar Elumalai et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Enhanced performance in inverted polymer solar cells via solution process: Morphology controlling of PEDOT:PSS as anode buffer layer by adding surfactants
Soo Won Heo et al.
ORGANIC ELECTRONICS (2013)
Structure, band gap and energy level modulations for obtaining efficient materials in inverted polymer solar cells
Jianyu Yuan et al.
ORGANIC ELECTRONICS (2013)
Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers
Souvik Kundu et al.
ORGANIC ELECTRONICS (2013)
Synergistic effects of buffer layer processing additives for enhanced hole carrier selectivity in inverted Organic Photovoltaics
Achilleas Savva et al.
ORGANIC ELECTRONICS (2013)
MoO3-Au composite interfacial layer for high efficiency and air-stable organic solar cells
Hongbin Pan et al.
ORGANIC ELECTRONICS (2013)
Room temperature solution-processed electron transport layer for organic solar cells
A. Hadipour et al.
ORGANIC ELECTRONICS (2013)
Phase separation-driven stratification in conventional and inverted P3HT:PCBM organic solar cells
E. Pavlopoulou et al.
ORGANIC ELECTRONICS (2013)
Acid-functionalized fullerenes used as interfacial layer materials in inverted polymer solar cells
Hyosung Choi et al.
ORGANIC ELECTRONICS (2013)
Efficiency of bulk-heterojunction organic solar cells
M. C. Scharber et al.
PROGRESS IN POLYMER SCIENCE (2013)
Growth of vertically aligned ZnO nanowalls for inverted polymer solar cells
Zhiqiang Liang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Inverted ITO- and PEDOT:PSS-free polymer solar cells with high power conversion efficiency
Markus Kohlstaedt et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Inverted polymer solar cells with a boron-doped zinc oxide layer deposited by metal organic chemical vapor deposition
Ziyang Hu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
All polymer photovoltaics: From small inverted devices to large roll-to-roll coated and printed solar cells
Yao Liu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Solution-processed zinc oxide nanoparticles as interlayer materials for inverted organic solar cells
Mohammed Aziz Ibrahem et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Interface-engineering additives for inverted BHJ polymer solar cells
Byoungchoo Park et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Organic photovoltaics with thick active layers (∼800 nm) using a high mobility polymer donor
Leanne Murphy et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Graphene quantum dots-incorporated cathode buffer for improvement of inverted polymer solar cells
Hong Bin Yang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
The state of organic solar cells-A meta analysis
Mikkel Jorgensen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Inverted low band gap polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO: Active layer thickness effect on the recombination process
O. Dhibi et al.
SUPERLATTICES AND MICROSTRUCTURES (2013)
Enhanced photovoltaic performance of inverted polymer solar cells by tuning the structures of titanium dioxide
Ruixiang Peng et al.
THIN SOLID FILMS (2013)
Design of the Solution-Processed Intermediate Layer by Engineering for Inverted Organic Multi junction Solar Cells
Ning Li et al.
ADVANCED ENERGY MATERIALS (2013)
Efficient Polymer Solar Cells on Opaque Substrates with a Laminated PEDOT:PSS Top Electrode
Dhritiman Gupta et al.
ADVANCED ENERGY MATERIALS (2013)
Development of Efficient and Stable Inverted Bulk Heterojunction (BHJ) Solar Cells Using Different Metal Oxide Interfaces
Ivan Litzov et al.
MATERIALS (2013)
Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces
Mark T. Greiner et al.
NPG ASIA MATERIALS (2013)
A highly efficient transition metal oxide layer for hole extraction and transport in inverted polymer bulk heterojunction solar cells
Raju Lampande et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Performance optimization of low-temperature-annealed solution-processable ZnO buffer layers for inverted polymer solar cells
Hye-Yun Park et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Solution-Processable Triindoles as Hole Selective Materials in Organic Solar Cells
Steve W. Shelton et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Degradation of a Thin Ag Layer Induced by Poly(3,4ethylenedioxythiophene):Polystyrene Sulfonate in a Transmission Electron Microscopy Specimen of an Inverted Polymer Solar Cell
Youngjoon Suh et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Hole and Electron Extraction Layers Based on Graphene Oxide Derivatives for High-Performance Bulk Heterojunction Solar Cells
Jun Liu et al.
ADVANCED MATERIALS (2012)
Conformal coating of titanium suboxide on carbon nanotube networks by atomic layer deposition for inverted organic photovoltaic cells
Sung H. Jin et al.
CARBON (2012)
Solar cells with one-day energy payback for the factories of the future
Nieves Espinosa et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
Hin-Lap Yip et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Exploring Spray-Coating Techniques for Organic Solar Cell Applications
Wanyi Nie et al.
INTERNATIONAL JOURNAL OF PHOTOENERGY (2012)
Light-soaking issue in polymer solar cells: Photoinduced energy level alignment at the sol-gel processed metal oxide and indium tin oxide interface
Junghwan Kim et al.
JOURNAL OF APPLIED PHYSICS (2012)
Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells
Fang Jeng Lim et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Inverted structure organic photovoltaic devices employing a low temperature solution processed WO3 anode buffer layer
Ning Li et al.
ORGANIC ELECTRONICS (2012)
Zinc Tin Oxide (ZTO) electron transporting buffer layer in inverted organic solar cell
Than Zaw Oo et al.
ORGANIC ELECTRONICS (2012)
Solution processed WO3 layer for the replacement of PEDOT:PSS layer in organic photovoltaic cells
Hana Choi et al.
ORGANIC ELECTRONICS (2012)
Thermal-annealing-free inverted polymer solar cells using ZnO/Cs2CO3 bilayer as electron-selective layer
Gang Cheng et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Spray-coated ZnO electron transport layer for air-stable inverted organic solar cells
Yong-Jin Kang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Spatial mapping of photocurrents in organic solar cells comprising wedge-shaped absorber layers for an efficient material screening
Felix Nickel et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells
Stephanie R. Dupont et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Performance improvement of inverted polymer solar cells thermally evaporating nickel oxide as an anode buffer layer
Wenjuan Yu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
The double-edged function of UV light in polymer solar cells with an inverted structure
Xiaoyan Du et al.
SYNTHETIC METALS (2012)
High Fill Factor Polymer Solar Cells Incorporating a Low Temperature Solution Processed WO3 Hole Extraction Layer
Tobias Stubhan et al.
ADVANCED ENERGY MATERIALS (2012)
MoO3 Thickness, Thermal Annealing and Solvent Annealing Effects on Inverted and Direct Polymer Photovoltaic Solar Cells
Sylvain Chambon et al.
MATERIALS (2012)
Inverted Organic Solar Cells with Sol-Gel Processed High Work-Function Vanadium Oxide Hole-Extraction Layers
Kirill Zilberberg et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer
Yanming Sun et al.
ADVANCED MATERIALS (2011)
Stretchable Organic Solar Cells
Darren J. Lipomi et al.
ADVANCED MATERIALS (2011)
Enhanced Performance and Stability of a Polymer Solar Cell by Incorporation of Vertically Aligned, Cross-Linked Fullerene Nanorods
Chih-Yu Chang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
High shunt resistance in polymer solar cells comprising a MoO3 hole extraction layer processed from nanoparticle suspension
Tobias Stubhan et al.
APPLIED PHYSICS LETTERS (2011)
Wet-Chemically Prepared NiO Layers as Hole Transport Layer in the Inverted Organic Solar Cell
Dong Chan Lim et al.
BULLETIN OF THE KOREAN CHEMICAL SOCIETY (2011)
Self-Assembled and Cross-Linked Fullerene Interlayer on Titanium Oxide for Highly Efficient Inverted Polymer Solar Cells
Yen-Ju Cheng et al.
CHEMISTRY OF MATERIALS (2011)
Life-cycle analysis of product integrated polymer solar cells
Nieves Espinosa et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Organic solar cells: A new look at traditional models
Jonathan D. Servaites et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Design and synthesis of solution processable small molecules towards high photovoltaic performance
Zaifang Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Novel ZnO nanostructured electrodes for higher power conversion efficiencies in polymeric solar cells
Jon Ajuria et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)
Inverted organic solar cells using a solution processed aluminum-doped zinc oxide buffer layer
Tobias Stubhan et al.
ORGANIC ELECTRONICS (2011)
Outlook Brightens for Plastic Solar Cells
Robert F. Service
SCIENCE (2011)
Influence of ZnO interlayer on the performance of inverted organic photovoltaic device
Ziyang Hu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Recent development of the inverted configuration organic solar cells
Fujun Zhang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Study of the series resistance evolution in organic solar cells by use of the Lambert W function
Sandro Lattante et al.
SYNTHETIC METALS (2011)
In Situ X-Ray Study of Drying-Temperature Influence on the Structural Evolution of Bulk-Heterojunction Polymer-Fullerene Solar Cells Processed by Doctor-Blading
Monamie Sanyal et al.
ADVANCED ENERGY MATERIALS (2011)
Morphological Characterization of a Low-Bandgap Crystalline Polymer:PCBM Bulk Heterojunction Solar Cells
Haiyun Lu et al.
ADVANCED ENERGY MATERIALS (2011)
Ultra Fast and Parsimonious Materials Screening for Polymer Solar Cells Using Differentially Pumped Slot-Die Coating
Jan Alstrup et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
Use of fluorine-doped tin oxide instead of indium tin oxide in highly efficient air-fabricated inverted polymer solar cells
Woon-Hyuk Baek et al.
APPLIED PHYSICS LETTERS (2010)
Honeycomb Carbon: A Review of Graphene
Matthew J. Allen et al.
CHEMICAL REVIEWS (2010)
Efficient and Air-Stable Polymer Photovoltaic Devices With WO3-V2O5 Mixed Oxides as Anodic Modification
Jing-Shun Huang et al.
IEEE ELECTRON DEVICE LETTERS (2010)
Electron irradiation effects on electrical and optical properties of sol-gel prepared ZnO films
J. S. Bhat et al.
JOURNAL OF APPLIED PHYSICS (2010)
Combination of Indene-C60 Bis-Adduct and Cross-Linked Fullerene Interlayer Leading to Highly Efficient Inverted Polymer Solar Cells
Yen-Ju Cheng et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Highly Efficient and Stable Inverted Polymer Solar Cells Integrated with a Cross-Linked Fullerene Material as an Interlayer
Chao-Hsiang Hsieh et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Effect of thermal annealing on the structural and optical properties of ZnO thin films deposited by the reactive e-beam evaporation technique
A. Mahmood et al.
PHYSICA SCRIPTA (2010)
A Review on the Development of the Inverted Polymer Solar Cell Architecture
Steven K. Hau et al.
POLYMER REVIEWS (2010)
Polymer-fullerene bulk heterojunction solar cells
Carsten Deibel et al.
REPORTS ON PROGRESS IN PHYSICS (2010)
The effect of post-processing treatments on inflection points in current-voltage curves of roll-to-roll processed polymer photovoltaics
Mathilde R. Lilliedal et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Oxidation of silver electrodes induces transition from conventional to inverted photovoltaic characteristics in polymer solar cells
Jong Bok Kim et al.
APPLIED PHYSICS LETTERS (2009)
Role of tungsten oxide in inverted polymer solar cells
Chen Tao et al.
APPLIED PHYSICS LETTERS (2009)
Effect of Interface Thickness on Power Conversion Efficiency of Polymer Photovoltaic Cells
Su-Hwan Lee et al.
ELECTRONIC MATERIALS LETTERS (2009)
On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells
Claudia N. Hoth et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Improving the Reproducibility of P3HT:PCBM Solar Cells by Controlling the PCBM/Cathode Interface
Bertrand Tremolet de Villers et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)
Inverted type bulk-heterojunction organic solar cell using electrodeposited titanium oxide thin films as electron collector electrode
Takayuki Kuwabara et al.
THIN SOLID FILMS (2009)
Surface-Directed Phase Separation of Conjugated Polymer Blends for Efficient Light-Emitting Diodes
Keng-Hoong Yim et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Interface modification for highly efficient organic photovoltaics
Roland Steim et al.
APPLIED PHYSICS LETTERS (2008)
An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer
A. K. K. Kyaw et al.
APPLIED PHYSICS LETTERS (2008)
Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer
Chen Tao et al.
APPLIED PHYSICS LETTERS (2008)
Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
Hua-Hsien Liao et al.
APPLIED PHYSICS LETTERS (2008)
Realization, characterization, and optical modeling of inverted bulk-heterojunction organic solar cells
Tayebeh Ameri et al.
JOURNAL OF APPLIED PHYSICS (2008)
The role of molybdenum oxide as anode interfacial modification in the improvement of efficiency and stability in organic light-emitting diodes
Fengxia Wang et al.
ORGANIC ELECTRONICS (2008)
Highly efficient simplified organic light emitting diodes
J. Meyer et al.
APPLIED PHYSICS LETTERS (2007)
Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells
Chiatzun Goh et al.
JOURNAL OF APPLIED PHYSICS (2007)
Performance and stability of electroluminescent device with self-assembled layers of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) and polyelectrolytes
Yun-Ho Kim et al.
THIN SOLID FILMS (2006)
Efficient inverted polymer solar cells
G. Li et al.
APPLIED PHYSICS LETTERS (2006)
Physics of organic bulk heterojunction devices for photovoltaic applications
Christoph Waldauf et al.
JOURNAL OF APPLIED PHYSICS (2006)
Improved light outcoupling for phosphorescent top-emitting organic light-emitting devices
SF Chen et al.
APPLIED PHYSICS LETTERS (2006)
New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer
JY Kim et al.
ADVANCED MATERIALS (2006)
Semiconductive polymer blends: Correlating structure with transport properties at the nanoscale
C Ionescu-Zanetti et al.
ADVANCED MATERIALS (2004)
An alternative method to build organic photodiodes
T Nyberg
SYNTHETIC METALS (2004)
Three-dimensional inhomogeneities in PEDOT:PSS films
M Kemerink et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2004)
Surface photovoltage spectroscopy of dye-sensitized solar cells with TiO2, Nb2O5, and SrTiO3 nanocrystalline photoanodes:: Indication for electron injection from higher excited dye states
F Lenzmann et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2001)
Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes
MP de Jong et al.
APPLIED PHYSICS LETTERS (2000)