Related references
Note: Only part of the references are listed.Management of the Web of Water and Web of Materials
Antoinette van Schaik et al.
MINERALS ENGINEERING (2010)
Dynamic modelling of E-waste recycling system performance based on product design
Antoinette van Schaik et al.
MINERALS ENGINEERING (2010)
Dynamic performance metrics to assess sustainability and cost effectiveness of integrated urban water systems
J. E. Fagan et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
Recycling rechargeable lithium ion batteries: Critical analysis of natural resource savings
Jo Dewulf et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
Comparing Waste-to-Energy technologies by applying energy system analysis
Marie Munster et al.
WASTE MANAGEMENT (2010)
A review of technologies for the recovery of metals from spent alkaline and zinc-carbon batteries
E. Sayilgan et al.
HYDROMETALLURGY (2009)
Contribution to advances in waste-to-energy technologies
Petr Stehlik
JOURNAL OF CLEANER PRODUCTION (2009)
Material Flow Analysis in the Aluminum Industry
Marlen Bertram et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2009)
Dynamic Modeling of Industrial Ecosystems
Matthias Ruth
JOURNAL OF INDUSTRIAL ECOLOGY (2009)
Platinum Group Metal Flows of Europe, Part II Exploring the Technological and Institutional Potential for Reducing Environmental Impacts
Mathieu Saurat et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2009)
Implementing the Results of Material Flow Analysis
Claudia R. Binder et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2009)
Integration of Life Cycle Assessment Into Agent-Based Modeling
Chris Davis et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2009)
Top submerged lance direct zinc smelting
J. Hoang et al.
MINERALS ENGINEERING (2009)
Evidence-based integrated environmental solutions for secondary lead smelters: Pollution prevention and waste minimization technologies and practices
A. M. Genaidy et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2009)
Waste battery treatment options: Comparing their environmental performance
K. Briffaerts et al.
WASTE MANAGEMENT (2009)
Recycling-oriented characterization of small waste electrical and electronic equipment
Perrine Chancerel et al.
WASTE MANAGEMENT (2009)
Recycling and recovery routes of plastic solid waste (PSW): A review
S. M. Al-Salem et al.
WASTE MANAGEMENT (2009)
The energy benefit of stainless steel recycling
Jeremiah Johnson et al.
ENERGY POLICY (2008)
Frontiers in Green Chemistry: meeting the grand challenges for sustainability in R&D and manufacturing
Julie B. Manley et al.
JOURNAL OF CLEANER PRODUCTION (2008)
Sustainability in electrical and electronic equipment closed-loop supply chains: A System Dynamics approach
Patroklos Georgiadis et al.
JOURNAL OF CLEANER PRODUCTION (2008)
ReSICLED: a new recovery-conscious design method for complex products based on a multicriteria assessment of the recoverability
Fabrice Mathieux et al.
JOURNAL OF CLEANER PRODUCTION (2008)
Metallurgical recovery of metals from electronic waste: A review
Jirang Cui et al.
JOURNAL OF HAZARDOUS MATERIALS (2008)
Life cycle inventories of energy systems: Results of current systems in Switzerland and other UCTE countries, 2003
Anita Zvolinschi et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2008)
The Sankey diagram in energy and material flow management - Part II: Methodology and current applications
Mario Schmidt
JOURNAL OF INDUSTRIAL ECOLOGY (2008)
A review of processes and technologies for the recycling of lithium-ion secondary batteries
Jinqiu Xu et al.
JOURNAL OF POWER SOURCES (2008)
A fundamental metric for metal recycling applied to coated magnesium
C. E. M. Meskers et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2008)
Exploring e-waste management systems in the United States
Ramzy Kahhat et al.
RESOURCES CONSERVATION AND RECYCLING (2008)
Overview of electronic waste (e-waste) management practices and legislations, and their poor applications in the developing countries
I. C. Nnorom et al.
RESOURCES CONSERVATION AND RECYCLING (2008)
Modelling municipal solid waste generation: A review
Peter Beigl et al.
WASTE MANAGEMENT (2008)
Use of recycled plastic in concrete: A review
Rafat Siddique et al.
WASTE MANAGEMENT (2008)
Super Light Car—lightweight construction thanks to a multi-material design and function integration
Martin Goede et al.
European Transport Research Review (2008)
Characterizing, propagating, and analyzing uncertainty in life-cycle assessment - A survey of quantitative approaches
Shannon M. Lloyd et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2007)
High temperature corrosion in a 65 MW waste to energy plant
Kristoffer Persson et al.
FUEL PROCESSING TECHNOLOGY (2007)
New trends for design towards sustainability in chemical engineering:: Green engineering
J. Garcia-Serna et al.
CHEMICAL ENGINEERING JOURNAL (2007)
The waste input-output approach to materials flow analysis - Concepts and application to base metals
Shinichiro Nakamura et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2007)
A critical systems approach to decision support for process engineering
Lauren Basson et al.
COMPUTERS & CHEMICAL ENGINEERING (2007)
The use of fuzzy rule models to link automotive design to recycling rate calculation
Antoinette van Schaik et al.
MINERALS ENGINEERING (2007)
Low CO2 emission technologies for iron and steelmaking as well as titania slag production
Andreas Orth et al.
MINERALS ENGINEERING (2007)
Exergy as a tool for evaluation of the resource efficiency of recycling systems
O. Ignatenko et al.
MINERALS ENGINEERING (2007)
State of the art of plastic sorting and recycling: Feedback to vehicle design
D. Froelich et al.
MINERALS ENGINEERING (2007)
Time-dependent material flow analysis of iron and steel in the UK Part 2. Scrap generation and recycling
J. Davis et al.
RESOURCES CONSERVATION AND RECYCLING (2007)
Cradle-to-cradle design: creating healthy emissions - a strategy for eco-effective product and system design
Michael Braungart et al.
JOURNAL OF CLEANER PRODUCTION (2007)
Materials selection and design for development of sustainable products
Lennart Y. Ljungberg
MATERIALS & DESIGN (2007)
Analysis of transport phenomena in a rotary-kiln hazardous waste incinerator
Yongxiang Yang et al.
PROGRESS IN COMPUTATIONAL FLUID DYNAMICS (2007)
Linking analyses and environmental Kuznets curves for aggregated material flows in the EU
Jarmo Vehmas et al.
JOURNAL OF CLEANER PRODUCTION (2007)
Material flow analysis adapted to an industrial area
Cristina Sendra et al.
JOURNAL OF CLEANER PRODUCTION (2007)
Assessing the environmental impact of metal production processes
T. E. Norgate et al.
JOURNAL OF CLEANER PRODUCTION (2007)
Paper waste - Recycling, incineration or landfilling? A review of existing life cycle assessments
A. Villanueva et al.
WASTE MANAGEMENT (2007)
LCA-IWM: A decision support tool for sustainability assessment of waste management systems
J. den Boer et al.
WASTE MANAGEMENT (2007)
Optimising waste treatment systems - Part A: Methodology and technological data for optimising energy production and economic performance
Veronika Dornburg et al.
RESOURCES CONSERVATION AND RECYCLING (2006)
Development of a recycling process for nickel-metal hydride batteries
Tobias Mueller et al.
JOURNAL OF POWER SOURCES (2006)
The development of a CFD model of a submerged arc furnace for phosphorus production
E. Scheepers et al.
MINERALS ENGINEERING (2006)
Assessing the recycling efficiency of copper from end-of-life products in Western Europe
Martin Ruhrberg
RESOURCES CONSERVATION AND RECYCLING (2006)
Comparison of four methods for integrating environmental and economic aspects in the end-of-life stage of a washing machine
Pil-Ju Park et al.
RESOURCES CONSERVATION AND RECYCLING (2006)
Integrated technique assessment based on the pinch analysis approach for the design of production networks
J Geldermann et al.
EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2006)
A review on the viable technology for construction waste recycling
VW Tam et al.
RESOURCES CONSERVATION AND RECYCLING (2006)
Converting an idea into a worldwide business commercializing smelting technology
JM Floyd
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2005)
A production-theory-based framework for analysing recycling systems in the e-waste sector
M Schmidt
ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2005)
Life cycle approaches to sustainable consumption: A critical review
EG Hertwich
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2005)
Green process design, industrial ecology, and sustainability: A systems analysis perspective
U Diwekar
RESOURCES CONSERVATION AND RECYCLING (2005)
Integrating industrial ecology principles into a set of environmental sustainability indicators for technology assessment
J Dewulf et al.
RESOURCES CONSERVATION AND RECYCLING (2005)
International expert group on life cycle assessment for integrated waste management
B Thomas et al.
JOURNAL OF CLEANER PRODUCTION (2005)
Environmental systems analysis tools - an overview
G Finnveden et al.
JOURNAL OF CLEANER PRODUCTION (2005)
A liberation model for comminution based on probability theory
SL Gay
MINERALS ENGINEERING (2004)
The time-varying factors influencing the recycling rate of products
A van Schaik et al.
RESOURCES CONSERVATION AND RECYCLING (2004)
The influence of particle size reduction and liberation on the recycling rate of end-of-life vehicles
A van Schaik et al.
MINERALS ENGINEERING (2004)
Proposal of six indicators of material cycles for describing society's metabolism: from the viewpoint of material flow analysis
S Hashimoto et al.
RESOURCES CONSERVATION AND RECYCLING (2004)
Separation of waste plastics by froth flotation - a review, part I
N Fraunholcz
MINERALS ENGINEERING (2004)
Recycling of batteries:: a review of current processes and technologies
AM Bernardes et al.
JOURNAL OF POWER SOURCES (2004)
Designing resilient, sustainable systems
J Fiksel
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2003)
Quotes for environmentally weighted recyclability (QWERTY): concept of describing product recyclability in terms of environmental value
J Huisman et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2003)
Mechanical recycling of waste electric and electronic equipment: a review
JR Cui et al.
JOURNAL OF HAZARDOUS MATERIALS (2003)
Sustainability science and engineering: The emergence of a new metadiscipline
JR Mihelcic et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2003)
A mathematical model and decision-support framework for material recovery, recycling and cascaded use
W Mellor et al.
CHEMICAL ENGINEERING SCIENCE (2002)
ORWARE -: a simulation tool for waste management
O Eriksson et al.
RESOURCES CONSERVATION AND RECYCLING (2002)
CO2 in the iron and steel industry:: an analysis of Japanese emission reduction potentials
D Gielen et al.
ENERGY POLICY (2002)
Process synthesis and optimisation tools for environmental design: methodology and structure
B Alexander et al.
COMPUTERS & CHEMICAL ENGINEERING (2000)