Related references
Note: Only part of the references are listed.Hybrid High-Resolution Three-Dimensional Nanofabrication for Metamaterials and Nanoplasmonics
Isabelle Staude et al.
ADVANCED MATERIALS (2013)
Energy harvesting of flexible and translucent dye-sensitized solar cell fabricated by laser assisted nano particle deposition system
Jin-Woong Lee et al.
ELECTROCHIMICA ACTA (2013)
Improvement of machinability of Waspaloy via laser-assisted machining
Hongtao Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
A review of hybrid manufacturing processes - state of the art and future perspectives
Z. Zhu et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2013)
Hybrid Micromachining of Glass Using ECDM and Micro Grinding
Xuan Doan Cao et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
3D Free-Form Patterning of Silicon by Ion Implantation, Silicon Deposition, and Selective Silicon Etching
Andreas C. Fischer et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication
Sung-Hoon Ahn et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Efficient and Precise Sample Preparation by Combination of Pulsed Laser Ablation and FIB Milling
R. Salzer et al.
MICROSCOPY AND MICROANALYSIS (2012)
Vibration assisted femtosecond laser machining on metal
Jung-Kyu Park et al.
OPTICS AND LASERS IN ENGINEERING (2012)
A study on the effect of ultrasonic vibration in nanosecond laser machining
Bongchul Kang et al.
OPTICS AND LASERS IN ENGINEERING (2012)
Solution-based adaptive parallel patterning by laser-induced local plasmonic surface defunctionalization
Bongchul Kang et al.
OPTICS EXPRESS (2012)
Surface effects of hybrid vibration-assisted femtosecond laser system for micro-hole drilling of copper substrate
Jung-Kyu Park et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Review: Developments in micro/nanoscale fabrication by focused ion beams
Chung-Soo Kim et al.
VACUUM (2012)
Nanoscale Electronics: Digital Fabrication by Direct Femtosecond Laser Processing of Metal Nanoparticles
Yong Son et al.
ADVANCED MATERIALS (2011)
Selective ablation-assisted two-photon stereolithography for effective nano- and microfabrication
Tae Woo Lim et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2011)
Laser-assisted microgrinding of ceramics
M. Kumar et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Nanoscale hybrid manufacturing process by nano particle deposition system (NPDS) and focused ion beam (FIB)
S. H. Ahn et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Thermal effects in laser assisted jet electrochemical machining
A. K. M. De Silva et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
One-Step Fabrication of Copper Electrode by Laser-Induced Direct Local Reduction and Agglomeration of Copper Oxide Nanoparticle
Bongchul Kang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Inkjet printing and low power laser annealing of silver nanoparticle traces for the realization of low resistivity lines for flexible electronics
A. Chiolerio et al.
MICROELECTRONIC ENGINEERING (2011)
Microelectrode fabrication by laser direct curing of tiny nanoparticle self-generated from organometallic ink
Bongchul Kang et al.
OPTICS EXPRESS (2011)
Ramp-up of hybrid manufacturing technologies
B. Nau et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2011)
Influence of side-insulation film on hybrid process of micro EDM and ECM for 3D micro structures
Manhong Hu et al.
FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3 (2011)
Room Temperature Deposition of TiO2 Using Nano Particle Deposition System (NPDS): Application to Dye-Sensitized Solar Cell (DSSC)
Min-Saeng Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Modeling and Experimental Investigation of Laser Drilling with Jet Electrochemical Machining
Zhang Hua et al.
CHINESE JOURNAL OF AERONAUTICS (2010)
Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application
M. M. Okasha et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Advances in hybrid laser joining
Jens Holtkamp et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Laser-assisted machining of hardened steel parts with surface integrity analysis
Hongtao Ding et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Machinability improvement of titanium alloy (Ti-6Al-4V) via LAM and hybrid machining
Chinmaya R. Dandekar et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Fabrication of a micro-pin array with high density and high hardness by combining mechanical peck-drilling and reverse-EDM
Yu-Lung Hwang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Fine-Sized Etching of Flexible Substrates Using Nano Particle Deposition System (NPDS)
Woojin Song et al.
MATERIALS TRANSACTIONS (2010)
Coating of Ni powders through micronozzle in a nano particle deposition system
KyuBong Jung et al.
METALS AND MATERIALS INTERNATIONAL (2010)
Morphological influence of the beam overlap in focused ion beam induced deposition using raster scan
Chung-Soo Kim et al.
MICROELECTRONIC ENGINEERING (2010)
Low cost integration of additive and subtractive processes for hybrid layered manufacturing
K. P. Karunakaran et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)
Nanoscale effects in carbon structures fabricated using focused ion beam-chemical vapor deposition
Chung-Soo Kim et al.
THIN SOLID FILMS (2010)
Electrochemical superabrasive machining of a nickel-based aeroengine alloy using mounted grinding points
D. T. Curtis et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming
B. Taleb Araghi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Laser assisted micro-milling of hard-to-machine materials
S. Melkote et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
High aspect ratio micro-hole drilling aided with ultrasonic vibration and planetary movement of electrode by micro-EDM
Z. Y. Yu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Micro ECM with Ultrasonic Vibrations Using a Semi-cylindrical Tool
Insoon Yang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2009)
High efficiency slicing of low resistance silicon ingot by wire electrolytic-spark hybrid machining
W. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Fabrication of silicon micro-mould for polymer replication using focused ion beam
C. S. Kim et al.
MICROELECTRONIC ENGINEERING (2009)
Investigation of a novel hybrid process of laser drilling assisted with jet electrochemical machining
Hua Zhang et al.
OPTICS AND LASERS IN ENGINEERING (2009)
Preparation of micro-fabricated biodegradable polymeric structures using NCDS
Jae-Hoon Lee et al.
ARCHIVES OF PHARMACAL RESEARCH (2008)
Shape deposition manufacturing of biologically inspired hierarchical microstructures
M. Lanzetta et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Assessment of abrasion-assisted material removal in wire EDM
I. Menzies et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
TiO2 coating on metal and polymer substrates by nano-particle deposition system (NPDS)
D. M. Chun et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Novel laser/water-jet hybrid manufacturing process for cutting ceramics
Raathai Molian et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Laser-assisted milling of silicon nitride ceramics and Inconel 718
Yinggang Tian et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Development of multi-axis numerical control program for mill-turn machine
Chen-Hua She et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Fabrication of a biodegradable drug delivery system with controlled release made of PLGA/5-FU/hydroxyapatite
Won-Shik Chu et al.
RAPID PROTOTYPING JOURNAL (2008)
A study on process parameters of ultrasonic assisted micro EDM based on Taguchi method
Murali M. Sundaram et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2008)
10.1016/j.jmatprotec.2007.04.051Electrodeposition of Ni-Fe micro-pillars using laser drilled templates
H. L. Seet et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Evaluation of mechanical and electrical properties of nanocomposite parts fabricated by nanocomposite deposition system (NODS)
S. G. Kim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
A graph-based methodology for hybrid rapid design
M. Rivette et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2007)
Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing
Seung Hwan Ko et al.
SENSORS AND ACTUATORS A-PHYSICAL (2007)
Fabrication of micro parts using nano composite deposition system
Won-Shik Chu et al.
RAPID PROTOTYPING JOURNAL (2007)
Laser-assisted machining of an austenitic stainless steel: P550
M. C. Anderson et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Precision and efficiency of laser assisted jet electrochemical machining
P. T. Pajak et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2006)
Three-dimensional rotor fabrication by focused-ion-beam chemical-vapor-deposition
Jun-ya Igaki et al.
MICROELECTRONIC ENGINEERING (2006)
Sequential laser and EDM micro-drilling for next generation fuel injection nozzle manufacture
Lin Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Application of micro-EDM combined with high-frequency dither grinding to micro-hole machining
HS Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
A nanofactory by focused ion beam
T Fujii et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Damage-free low temperature pulsed laser printing of gold nanoinks on polymers
J Chung et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)
An experimental investigation of microresistor laser printing with gold nanoparticle-laden inks
NR Bieri et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2005)
Modelling the aspects of precision and efficiency in laser-assisted jet electrochemical machining (LAJECM)
PT Pajak et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Chemical assisted laser machining for the minimisation of recast and heat affected zone
L Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Modelling and experimental investigation of laser assisted jet electrochemical machining
AKM De Silva et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Study of electrical discharge machining technology for slicing silicon ingots
WY Peng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol
H Huang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2003)
A study of ultrasonically aided micro-electrical-discharge machining by the application of workpiece vibration
CS Gao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Fabrication of 3D metal microstructures using a hybrid process of micro-EDM and laser assembly
CL Kuo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)
Femtosecond laser aperturless near-field nanomachining of metals assisted by scanning probe microscopy
A Chimmalgi et al.
APPLIED PHYSICS LETTERS (2003)
A study on the chemical mechanical micro-machining (C3M) process and its application
JM Park et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Process development of precision surface micro-machining using mechanical abrasion and chemical etching
JM Lee et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2002)
Hybrid rapid prototyping system using machining and deposition
JH Hur et al.
COMPUTER-AIDED DESIGN (2002)
Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining
BH Yan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
ECDM (Electro Chemical Discharge Machining), a new method for trueing and dressing of metal-bonded diamond grinding tools
M Schopf et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Share Paper
