Related references
Note: Only part of the references are listed.High-Performance LiNi0.5Mn1.5O4 Spinel Controlled by Mn3+Concentration and Site Disorder
Jie Xiao et al.
ADVANCED MATERIALS (2012)
LiNi0.5Mn1.5O4 Hollow Structures as High-Performance Cathodes for Lithium-Ion Batteries
Liang Zhou et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)
Improving the cycling stability of silicon nanowire anodes with conducting polymer coatings
Yan Yao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
A polymer electrolyte-skinned active material strategy toward high-voltage lithium ion batteries: a polyimide-coated LiNi0.5Mn1.5O4 spinel cathode material case
Ju-Hyun Cho et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Graphene oxide oxidizes stannous ions to synthesize tin sulfide-graphene nanocomposites with small crystal size for high performance lithium ion batteries
Ming Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Porous Doped Silicon Nanowires for Lithium Ion Battery Anode with Long Cycle Life
Mingyuan Ge et al.
NANO LETTERS (2012)
The Current Move of Lithium Ion Batteries Towards the Next Phase
Tae-Hee Kim et al.
ADVANCED ENERGY MATERIALS (2012)
Improving the Performance of Lithium-Sulfur Batteries by Conductive Polymer Coating
Yuan Yang et al.
ACS NANO (2011)
LiMn1-xFexPO4 Nanorods Grown on Graphene Sheets for Ultrahigh-Rate-Performance Lithium Ion Batteries
Hailiang Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Effects of Al substitution for Ni and Mn on the electrochemical properties of LiNi0.5Mn1.5O4
G. B. Zhong et al.
ELECTROCHIMICA ACTA (2011)
Enhanced rate performance of carbon-coated LiNi0.5Mn1.5O4 cathode material for lithium ion batteries
Tongyong Yang et al.
ELECTROCHIMICA ACTA (2011)
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Liwen Ji et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
AlF3 coating of LiNi0.5Mn1.5O4 for high-performance Li-ion batteries
Jiangang Li et al.
IONICS (2011)
Synthesis of LiNi0.5Mn1.5O4 by solid-state reaction with improved electrochemical performance
X. Y. Feng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Highly conductive chemically converted graphene prepared from mildly oxidized graphene oxide
Yuxi Xu et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Graphene modified LiFePO4 cathode materials for high power lithium ion batteries
Xufeng Zhou et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Challenges for rechargeable batteries
J. B. Goodenough et al.
JOURNAL OF POWER SOURCES (2011)
An Advanced Lithium Ion Battery Based on High Performance Electrode Materials
Jusef Hassoun et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Liwen Ji et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Graphene-Wrapped Sulfur Particles as a Rechargeable Lithium-Sulfur Battery Cathode Material with High Capacity and Cycling Stability
Hailiang Wang et al.
NANO LETTERS (2011)
Graphene-wrapped TiO2 hollow structures with enhanced lithium storage capabilities
Jun Song Chen et al.
NANOSCALE (2011)
Facile synthesis of metal oxide/reduced graphene oxide hybrids with high lithium storage capacity and stable cyclability
Jixin Zhu et al.
NANOSCALE (2011)
A high-rate long-life Li4Ti5O12/Li[Ni0.45Co0.1Mn1.45]O4 lithium-ion battery
Hun-Gi Jung et al.
NATURE COMMUNICATIONS (2011)
Electrochemical properties of nano- and micro-sized LiNi0.5Mn1.5O4 synthesized via thermal decomposition of a ternary eutectic Li-Ni-Mn acetate
X. Fang et al.
ELECTROCHIMICA ACTA (2010)
Surface modification of cathode materials from nano- to microscale for rechargeable lithium-ion batteries
Seung-Taek Myung et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Surface modification of LiNi0.5Mn1.5O4 by ZrP2O7 and ZrO2 for lithium-ion batteries
H. M. Wu et al.
JOURNAL OF POWER SOURCES (2010)
Improved electrochemical properties of BiOF-coated 5 V spinel Li[Ni0.5Mni1.5]O4 for rechargeable lithium batteries
Han-Byeol Kang et al.
JOURNAL OF POWER SOURCES (2010)
Mn3O4-Graphene Hybrid as a High-Capacity Anode Material for Lithium Ion Batteries
Hailiang Wang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Study of the Cathode-Electrolyte Interface of LiMn1.5Ni0.5O4 Synthesized by a Sol-Gel Method for Li-Ion Batteries
Hugues Duncan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
A New, Safe, High-Rate and High-Energy Polymer Lithium-Ion Battery
Jusef Hassoun et al.
ADVANCED MATERIALS (2009)
Understanding the Improvement in the Electrochemical Properties of Surface Modified 5 V LiMn1.42Ni0.42Co0.16O4 Spinel Cathodes in Lithium-ion Cells
Jun Liu et al.
CHEMISTRY OF MATERIALS (2009)
Study of LiNi0.5Mn1.5O4 synthesized via a chloride-ammonia co-precipitation method: Electrochemical performance, diffusion coefficient and capacity loss mechanism
X. Fang et al.
ELECTROCHIMICA ACTA (2009)
High-energy cathode material for long-life and safe lithium batteries
Yang-Kook Sun et al.
NATURE MATERIALS (2009)
Nano-LiNi0.5Mn1.5O4 spinel: a high power electrode for Li-ion batteries
Kuthanapillil M. Shaju et al.
DALTON TRANSACTIONS (2008)
Effects of coating with gold on the performance of nanosized LiNi0.5Mn1.5O4 for lithium batteries
J. Arrebola et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Improvement of electrochemical properties of LiNi0.5Mn1.5O4 spinel prepared by radiated polymer gel method
H. Y. Xu et al.
ELECTROCHIMICA ACTA (2006)
The study of LiNi0.5Mn1.5O45-V cathodes for Li-ion batteries
Y Talyosef et al.
JOURNAL OF POWER SOURCES (2005)
Adverse effect of Ag treatment on the electrochemical performance of the 5 V nanometric spinel LiNi0.5Mn1.5O4 in lithium cells
J Arrebola et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)
X-ray diffraction and electrochemical impedance spectroscopy study of zinc coated LiNi0.5Mn1.5O4 electrodes
R Alcántara et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2004)
Comparative study of LiNi0.5Mn1.5O4-δ and LiNi0.5Mn1.5O4 cathodes having two crystallographic structures:: Fd(3)over-barm and P4332
JH Kim et al.
CHEMISTRY OF MATERIALS (2004)
Molten salt synthesis of LiNi0.5Mn1.5O4 spinel for 5 V class cathode material of Li-ion secondary battery
JH Kim et al.
ELECTROCHIMICA ACTA (2004)
Cathode materials for lithium ion batteries prepared by sol-gel methods
H Liu et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2004)
Optimization of insertion compounds such as LiMn2O4 for Li-ion batteries
G Amatucci et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)
Synthesis and electrochemical properties of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode material for lithium secondary batteries
YK Sun et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2002)
Issues and challenges facing rechargeable lithium batteries
JM Tarascon et al.
NATURE (2001)
Structural, magnetic and lithium insertion properties of spinel-type Li2Mn3MO8 oxides (M = Mg, Co, Ni, Cu)
P Strobel et al.
JOURNAL OF MATERIALS CHEMISTRY (2000)
Share Paper
