Related references
Note: Only part of the references are listed.Catalytic activity of ultrathin Pt films on aligned carbon nanotube arrays
Xin Su et al.
CARBON (2011)
Preparation of cost-effective Pt-Co electrodes by pulse electrodeposition for PEMFC electrocatalysts
Seunghee Woo et al.
ELECTROCHIMICA ACTA (2011)
High-density plasma nitriding of AISI 316L for bipolar plate in proton exchange membrane fuel cell
Wonhyuk Hong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Corrosion characteristics of SS316L as bipolar plate material in PEMFC cathode environments with different acidities
Ying Yang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Nitride films as protective layers for metallic bipolar plates of polymer electrolyte membrane fuel cell stacks
Byung-Chul Cha et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Preparation of Cr-based multilayer coating on stainless steel as bipolar plate for PEMFCs by magnetron sputtering
Dongming Zhang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Corrosion behaviour of construction materials for high temperature steam electrolysers
A. V. Nikiforov et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Polyol synthesis of nanosized Pt/C electrocatalysts assisted by pulse microwave activation
E. Lebegue et al.
JOURNAL OF POWER SOURCES (2011)
Influence of CrN-coating thickness on the corrosion resistance behaviour of aluminium-based bipolar plates
Jose Barranco et al.
JOURNAL OF POWER SOURCES (2011)
Chromium nitride/Cr coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cell
Rujin Tian
JOURNAL OF POWER SOURCES (2011)
Arc ion plated Cr/CrN/Cr multilayers on 316L stainless steel as bipolar plates for polymer electrolyte membrane fuel cells
Min Zhang et al.
JOURNAL OF POWER SOURCES (2011)
Silver implanted 316L stainless steel as bipolar plates in polymer electrolyte membrane fuel cells
Kai Feng et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Composite endplates with pre-curvature for PEMFC (polymer electrolyte membrane fuel cell)
Ha Na Yu et al.
COMPOSITE STRUCTURES (2010)
Axiomatic design of the sandwich composite endplate for PEMFC in fuel cell vehicles
Ha Na Yu et al.
COMPOSITE STRUCTURES (2010)
Polymer Electrolyte Membrane Fuel Cell (PEMFC) Flow Field Plate: Design, Materials and Characterisation
P. J. Hamilton et al.
FUEL CELLS (2010)
Effects of low-temperature nitridation on the electrical conductivity and corrosion resistance of 446M stainless steel as bipolar plates for proton exchange membrane fuel cell
Seok-Hyun Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Corrosion resistance of stainless steel bipolar plates in a PEFC environment: A comprehensive study
Johan Andre et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Deposition of gold-titanium and gold-nickel coatings on electropolished 316L stainless steel bipolar plates for proton exchange membrane fuel cells
Young-Hoon Yun
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Ni-Cr Co-implanted 316L stainless steel as bipolar plate in polymer electrolyte membrane fuel cells
Kai Feng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Chromium-containing carbon film on stainless steel as bipolar plates for proton exchange membrane fuel cells
Bo Wu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Applicability of extra low interstitials ferritic stainless steels for bipolar plates of proton exchange membrane fuel cells
Masanobu Kumagai et al.
JOURNAL OF POWER SOURCES (2010)
Structured multilayered electrodes of proton/electron conducting polymer for polymer electrolyte membrane fuel cells assembled by spray coating
Andre Wolz et al.
JOURNAL OF POWER SOURCES (2010)
Performance of a proton exchange membrane fuel cell stack using conductive amorphous carbon-coated 304 stainless steel bipolar plates
Peiyun Yi et al.
JOURNAL OF POWER SOURCES (2010)
High-durability titanium bipolar plate modified by electrochemical deposition of platinum for unitized regenerative fuel cell (URFC)
Ho-Young Jung et al.
JOURNAL OF POWER SOURCES (2010)
Fabrication of metallic bipolar plate for proton exchange membrane fuel cells by rubber pad forming
Yanxiong Liu et al.
JOURNAL OF POWER SOURCES (2010)
Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments
L. Wang et al.
JOURNAL OF POWER SOURCES (2010)
Corrosion resistance characteristics of stamped and hydroformed proton exchange membrane fuel cell metallic bipolar plates
F. Dundar et al.
JOURNAL OF POWER SOURCES (2010)
Nanostructured catalysts in fuel cells
Chuan-Jian Zhong et al.
NANOTECHNOLOGY (2010)
Inductively coupled plasma nitriding of chromium electroplated AISI 316L stainless steel for PEMFC bipolar plate plate
D. -H. Han et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Conductive amorphous carbon-coated 316L stainless steel as bipolar plates in polymer electrolyte membrane fuel cells
Kai Feng et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Carbon-based films coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cells
Yu Fu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Electrochemical response of zirconia-coated 316L stainless-steel in a simulated proton exchange membrane fuel cell environment
W. G. Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effect of Nafion and platinum content in a catalyst layer processed in a radio frequency helicon plasma system
A. Caillard et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2009)
(Titanium, chromium) nitride coatings for bipolar plate of polymer electrolyte membrane fuel cell
H. S. Choi et al.
JOURNAL OF POWER SOURCES (2009)
Chromium nitride films on stainless steel as bipolar plate for proton exchange membrane fuel cell
Bo Wu et al.
JOURNAL OF POWER SOURCES (2009)
Improved corrosion resistance and interfacial contact resistance of 316L stainless-steel for proton exchange membrane fuel cell bipolar plates by chromizing surface treatment
S. B. Lee et al.
JOURNAL OF POWER SOURCES (2009)
Dependence of polymer electrolyte fuel cell performance on preparation conditions of slurry for catalyst layers
Yoshiyuki Komoda et al.
JOURNAL OF POWER SOURCES (2009)
Durability and characterization studies of polymer electrolyte membrane fuel cell's coated aluminum bipolar plates and membrane electrode assembly
Y. Hung et al.
JOURNAL OF POWER SOURCES (2009)
Performance of a high Cr and Ni austenitic stainless steel bipolar plates in proton exchange membrane fuel cell working environments
Rujin Tian et al.
JOURNAL OF POWER SOURCES (2009)
Review of the membrane and bipolar plates materials for conventional and unitized regenerative fuel cells
Salwan S. Dihrab et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Ordered mesoporous carbons with controlled particle sizes as catalyst supports for direct methanol fuel cell cathodes
Sang Hoon Joo et al.
CARBON (2008)
Nanoparticle TiN-coated type 310S stainless steel as bipolar plates for polymer electrolyte membrane fuel cell
Seung-Taek Myung et al.
ELECTROCHEMISTRY COMMUNICATIONS (2008)
Corrosion behavior of austenitic stainless steels as a function of pH for use as bipolar plates in polymer electrolyte membrane fuel cells
Masanobu Kumagai et al.
ELECTROCHIMICA ACTA (2008)
Corrosion resistant low temperature carburized SS 316 as bipolar plate material for PEMFC application
Vaibhav V. Nikam et al.
ELECTROCHIMICA ACTA (2008)
Pulse and pulse reverse plating - Conceptual, advantages and applications
M. S. Chandrasekar et al.
ELECTROCHIMICA ACTA (2008)
Study on behavior of plasma nitrided 316L in PEMFC working conditions
Rujin Tian et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)
Corrosion study of SS430/Nb as bipolar plate materials for PEMFCs
A. Pozio et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2008)
Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating
Yu Fu et al.
JOURNAL OF POWER SOURCES (2008)
Process modification for coating SnO2:F on stainless steels for PEM fuel cell bipolar plates
Heli Wang et al.
JOURNAL OF POWER SOURCES (2008)
Bipolar plate materials for PEMFCs: A conductivity and stability study
A. Pozio et al.
JOURNAL OF POWER SOURCES (2008)
Anodic behavior of high nitrogen-bearing steels in PEMFC environments
Heli Wang et al.
JOURNAL OF POWER SOURCES (2008)
High nitrogen stainless steel as bipolar plates for proton exchange membrane fuel cells
Masanobu Kumagai et al.
JOURNAL OF POWER SOURCES (2008)
Numerical investigation of the effect of cathode catalyst layer structure and composition on polymer electrolyte membrane fuel cell performance
Sai Kamarajugadda et al.
JOURNAL OF POWER SOURCES (2008)
Austenitic stainless steels in high temperature phosphoric acid
Heli Wang et al.
JOURNAL OF POWER SOURCES (2008)
Evaluation of coated metallic bipolar plates for polymer electrolyte membrane fuel cells
Wonseok Yoon et al.
JOURNAL OF POWER SOURCES (2008)
Carbon film-coated 304 stainless steel as PEMFC bipolar plate
Chih-Yeh Chung et al.
JOURNAL OF POWER SOURCES (2008)
Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell
Linfa Peng et al.
JOURNAL OF POWER SOURCES (2008)
Simulation of nanostructured electrodes for polymer electrolyte membrane fuel cells
Sanjeev M. Rao et al.
JOURNAL OF POWER SOURCES (2008)
An investigation into nickel implanted 316L stainless steel as a bipolar plate for PEM fuel cell
Kai Feng et al.
JOURNAL OF POWER SOURCES (2008)
Ag-polytetrafluoroethylene composite coating on stainless steel as bipolar plate of proton exchange membrane fuel cell
Yu Fu et al.
JOURNAL OF POWER SOURCES (2008)
Corrosion resistance of chromized 316L stainless steel for PEMFC bipolar plates
K. H. Cho et al.
JOURNAL OF POWER SOURCES (2008)
Membranes and MEAs based on sulfonated poly(ether ketone ketone) and heteropolyacids for polymer electrolyte fuel cells
Vijay Ramani et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Carbon-coated stainless steel as PEFC bipolar plate material
Tomokazu Fukutsuka et al.
JOURNAL OF POWER SOURCES (2007)
Effects of O2 and H2 on the corrosion of SS316L metallic bipolar plate materials in simulated anode and cathode environments of PEM fuel cells
Yan Wang et al.
ELECTROCHIMICA ACTA (2007)
Corrosion behavior of two bipolar plate materials in simulated PEMFC environment by electrochemical noise technique
A.-M. Lafront et al.
ELECTROCHIMICA ACTA (2007)
Aluminate cement/graphite conductive composite bipolar plate for proton exchange membrane fuel cells
Shen Chunhui et al.
JOURNAL OF POWER SOURCES (2007)
Development of bipolar plates for fuel cells from graphite filled wet-lay material and a thermoplastic laminate skin layer
Brent D. Cunningham et al.
JOURNAL OF POWER SOURCES (2007)
An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells
Yan Wang et al.
JOURNAL OF POWER SOURCES (2007)
Review of materials and characterization methods for polymer electrolyte fuel cell flow-field plates
Daniel J. L. Brett et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2007)
Metal bipolar plates for PEM fuel cell - A review
H. Tawfik et al.
JOURNAL OF POWER SOURCES (2007)
Testing and evaluation of aluminum coated bipolar plates of pern fuel cells operating at 70°C
Yue Hung et al.
JOURNAL OF POWER SOURCES (2006)
An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells
Yan Wang et al.
JOURNAL OF POWER SOURCES (2006)
A novel Nylon-6-S316L fiber compound material for injection molded PEM fuel cell bipolar plates
Jenn-Kun Kuo et al.
JOURNAL OF POWER SOURCES (2006)
Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells
Szu-Hua Wang et al.
JOURNAL OF POWER SOURCES (2006)
Study on the electrical and mechanical properties of polyvinylidene fluroide/titanium silicon carbide composite bipolar plates
Zhu Bin et al.
JOURNAL OF POWER SOURCES (2006)
Plasma-nitrided austenitic stainless steel 316L as bipolar plate for PEMFC
Rujin Tian et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2006)
Corrugated bipolar sheets as fuel distributors in PEMFC
Vaibhav V. Nikam et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2006)
Surface modification and development of titanium bipolar plates for PEM fuel cells
Szu-Hua Wang et al.
JOURNAL OF POWER SOURCES (2006)
Performance of an aluminate cement/graphite conductive composite bipolar plate
Shen Chunhui et al.
JOURNAL OF POWER SOURCES (2006)
Study of electrodeposited polypyrrole coatings for the corrosion protection of stainless steel bipolar plates for the PEM fuel cell
M. A. Lucio Garcia et al.
JOURNAL OF POWER SOURCES (2006)
The development of economical bipolar plates for fuel cells
Brent Cunningham et al.
JOURNAL OF MATERIALS CHEMISTRY (2006)
Studies on preparation and performance of sodium silicate/graphite conductive composites
Chunhui Shen et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
Corrosion studies of a copper-beryllium alloy in a simulated polymer electrolyte membrane fuel-cell environment
VV Nikam et al.
JOURNAL OF POWER SOURCES (2005)
Bipolar plates for PEM fuel cells: A review
A Hermann et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
Conducting polymer-coated stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC)
S Joseph et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
Review of bipolar plates in PEM fuel cells: Flow-field designs
XG Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
Highly water-proof coating of gas flow channels by plasma polymerization for PEM fuel cells
A Taniguchi et al.
JOURNAL OF POWER SOURCES (2005)
Distributed performance of polymer electrolyte fuel cells under low-humidity conditions
Q Dong et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Properties of gas diffusion electrodes containing sulfonated poly( ether ether ketone)
EB Easton et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Design analysis of PEMFC bipolar plates considering stack manufacturing and environment impact
JS Cooper
JOURNAL OF POWER SOURCES (2004)
Ferritic stainless steels as bipolar plate material for polymer electrolyte membrane fuel cells
HL Wang et al.
JOURNAL OF POWER SOURCES (2004)
Preferential thermal nitridation to form pin-hole free Cr-nitrides to protect proton exchange membrane fuel cell metallic bipolar plates
MP Brady et al.
SCRIPTA MATERIALIA (2004)
Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells
EA Cho et al.
JOURNAL OF POWER SOURCES (2004)
Mass production cost of PEM fuel cell by learning curve
H Tsuchiya et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2004)
Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell
HC Kuan et al.
JOURNAL OF POWER SOURCES (2004)
Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments
MC Li et al.
CORROSION SCIENCE (2004)
Corrosion-resistant component for PEM fuel cells
SJ Lee et al.
JOURNAL OF POWER SOURCES (2004)
Injection moulded low cost bipolar plates for PEM fuel cells
A Heinzel et al.
JOURNAL OF POWER SOURCES (2004)
Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells
HL Wang et al.
JOURNAL OF POWER SOURCES (2003)
Review and analysis of PEM fuel cell design and manufacturing
V Mehta et al.
JOURNAL OF POWER SOURCES (2003)
Polyetheretherketone membranes for elevated temperature PEMFCs
B Lakshmanan et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2003)
Tryptophan as copper corrosion inhibitor in 0.5 M aerated sulfuric acid
G Moretti et al.
CORROSION SCIENCE (2002)
Investigation of electrical conductivity as a function of dopant-ion radius in the systems Zr0.75Ce0.08M0.17O1.92 (M=Nd, Sm, Gd, Dy, Ho, Y, Er, Yb, Sc)
J Kimpton et al.
SOLID STATE IONICS (2002)
Metallic bipolar plates for PEM fuel cells
J Wind et al.
JOURNAL OF POWER SOURCES (2002)
On limit of molybdenum content of pitting-corrosion-resistant austenitic steels
YI Bil'chugov et al.
PROTECTION OF METALS (2001)
Stainless steel as a bipolar plate material for solid polymer fuel cells
DP Davies et al.
JOURNAL OF POWER SOURCES (2000)
Bipolar plate materials for solid polymer fuel cells
DP Davies et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2000)
Use of stainless steel for cost competitive bipolar plates in the SPFC
RC Makkus et al.
JOURNAL OF POWER SOURCES (2000)
Share Paper
