Combined Capture and Utilization of CO2 for Syngas Production over Dual-Function Materials

The integration of CO2 capture and conversion has been recently demonstrated as a promising approach to address CO2 emissions while producing value-added chemicals and fuels. Herein, we report in situ capture and utilization of CO2 in syngas production from dry reforming of ethane (DRE) over dual-function materials (DFMs) consisting of Ni-impregnated CaO- and MgO-based double salts supported on gamma-Al2O3. The N-2 physisorption, XRD, CO2-TPD, NH3-TPD, H-2-TPR, and XPS analyses were performed to characterize the obtained DFMs. The CO2 adsorption-desorption performance of gamma-Al2O3-supported adsorbent catalyst materials at 650 degrees C indicated that 100% of the adsorbed CO2 was desorbed from the DFMs surface for subsequent reaction with C2H6. At a reaction temperature of 650 degrees C and WHSV of 2250 mL g(-1) h(-1), the Ni-20@(K-Ca)(50)/(gamma-Al2O3)(50) and Ni-20@(Na-Ca)(50)/(gamma-Al2O3)(50) showed the best activity with 100% C2H6 conversion and 65% and 75% CO2 conversion, respectively. Analysis of the spent DFMs revealed a low degree of coke formation (similar to 9 wt %) which reduced the stability of DFMs by only 5%. The results reported in this investigation highlight the importance of combined capture-reaction system as a cost-effective technology for utilizing the emitted CO2 as a feedstock to make valuable chemicals, materials, and fuels.