Related references
Note: Only part of the references are listed.Hardness recovery mechanism in the heat-affected zone during long-term natural aging and its influence on the mechanical properties and fracture behavior of friction stir welded 2024Al-T351 joints
Z. Zhang et al.
ACTA MATERIALIA (2014)
Evolution of the Microstructure and Strength in the Nugget Zone of Friction Stir Welded SiCp/Al-Cu-Mg Composite
D. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Achieving friction stir welded SiCp/Al-Cu-Mg composite joint of nearly equal strength to base material at high welding speed
D. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Tensile properties and strain-hardening behaviour of friction stir welded SiCp/AA2009 composite joints
D. R. Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Friction stir welding of thick plates of aluminum alloy matrix composite with a high volume fraction of ceramic reinforcement
F. Cioffi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Residual stresses and high cycle fatigue properties of friction stir welded SiCp/AA2009 composites
D. R. Ni et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
A Comparative Evaluation of the Wear Resistance of Various Tool Materials in Friction Stir Welding of Metal Matrix Composites
T. Prater et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Prediction of tensile strength of friction stir welded stir cast AA6061-T6/AlNp composite
N. Murugan et al.
MATERIALS & DESIGN (2013)
Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet
D. R. Ni et al.
MATERIALS & DESIGN (2013)
Friction stir welding of SiCp/2009Al composite plate
D. Wang et al.
MATERIALS & DESIGN (2013)
Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet
Rui-dong Fu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Friction stir welding of a P/M Al-Al2O3 nanocomposite: Microstructure and mechanical properties
F. Khodabakhshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Joining of AA1100-16 vol.-%B4C metal matrix composite using laser welding and friction stir welding
J. Guo et al.
CANADIAN METALLURGICAL QUARTERLY (2012)
Review of tools for friction stir welding and processing
Y. N. Zhang et al.
CANADIAN METALLURGICAL QUARTERLY (2012)
Effect of Heat Input on Mechanical and Metallurgical Properties of Friction Stir Welded AA6061-10% SiCp MMCs
P. Periyasamy et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2 in situ cast composites
I. Dinaharan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite
H. Nami et al.
MATERIALS & DESIGN (2011)
Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites
G. Minak et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al-10 wt.% TiB2 metal matrix composite
S. J. Vijay et al.
MATERIALS & DESIGN (2010)
Analysis of crack propagation resistance of Al-Al2O3 particulate-reinforced composite friction stir welded butt joints
A. Pirondi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Investigation on TIG welding of SiCp-reinforced aluminum-matrix composite using mixed shielding gas and Al-Si filler
Wang Xi-he et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Microstructure and mechanical properties of friction stir welded AA6063-B4C metal matrix composites
X-G. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite
A. H. Feng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Fracture and fatigue crack growth behaviour of PMMC friction stir welded butt joints
A. Pirondi et al.
ENGINEERING FRACTURE MECHANICS (2008)
Formation of Cu2FeAl7 phase in friction-stir-welded SiCp/Al-Cu-Mg composite
A. H. Feng et al.
SCRIPTA MATERIALIA (2007)
Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.%Al2O3p composite
L. Ceschini et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Microstructure, tensile and fatigue properties of AA6061/20 vao.%Al2O3p friction stir welded joints
L. Ceschini et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Friction stir welding of SiC particulate reinforced AA2124 aluminium alloy matrix composite
Huseyin Uzun
MATERIALS & DESIGN (2007)
Friction stir welding of an AA6061/Al2O3/20p reinforced alloy
LM Marzoli et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Evaluation of microstructure and mechanical properties in friction stir welded A356+15%SiCp cast composite
A Amirizad et al.
MATERIALS LETTERS (2006)
Fusion and friction stir welding of aluminum-metal-matrix composites
D Storjohann et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Wear characteristics of a WC-Co tool in friction stir welding of AC4A+30 vol%SiCp composite
HJ Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Development of Trivex friction stir welding tool Part 1 - two-dimensional flow modelling and experimental validation
PA Colegrove et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
Friction stir welding of ceramic particle reinforced aluminium based metal matrix composites
P Cavaliere et al.
APPLIED COMPOSITE MATERIALS (2004)
Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al2O3 MMC
RA Prado et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Shape optimization for tool wear in the friction-stir welding of cast Al359-20% SiC MMC
DJ Shindo et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum
YS Sato et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Tool wear in the friction-stir welding of aluminum alloy 6061+20% Al2O3:: a preliminary study
RA Prado et al.
SCRIPTA MATERIALIA (2001)
Microstructural and mechanical characteristics of in situ metal matrix composites
SC Tjong et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)
Share Paper
