Related references
Note: Only part of the references are listed.Single-Junction Polymer Solar Cells with Over 10% Efficiency by a Novel Two-Dimensional Donor-Acceptor Conjugated Copolymer
Chang Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Improvement of bulk heterojunction organic solar cells based on PTB7:PC61BM with small amounts of P3HT
Yurina Ohori et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2015)
High-performance multiple-donor bulk heterojunction solar cells
Yang (Michael) Yang et al.
NATURE PHOTONICS (2015)
Charge carrier mobility of the organic photovoltaic materials PTB7 and PC71BM and its influence on device performance
Bernd Ebenhoch et al.
ORGANIC ELECTRONICS (2015)
Enhanced performance and morphological evolution of PTB7:PC71BM polymer solar cells by using solvent mixtures with different additives
Di Huang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)
Competition between recombination and extraction of free charges determines the fill factor of organic solar cells
Davide Bartesaghi et al.
NATURE COMMUNICATIONS (2015)
Coevaporated Bisquaraine Inverted Solar Cells: Enhancement Due to Energy Transfer and Open Circuit Voltage Control
Tenghooi Goh et al.
ACS PHOTONICS (2015)
Ternary Blend Hybrid Solar Cells Incorporating Wide and Narrow Bandgap Polymers
Hyung Do Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Influence of Polymer Compatibility on the Open-Circuit Voltage in Ternary Blend Bulk Heterojunction Solar Cells
Petr P. Khlyabich et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
[6,6]-Phenyl-C61-butyric Acid 2-((2(Dimethylamino)ethyl)(methyl)amino)-ethyl Ester as an Acceptor and Cathode Interfacial Material in Polymer Solar Cells
Menglan Lv et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor
Pei Cheng et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Ternary blend polymer solar cells with enhanced power conversion efficiency
Luyao Lu et al.
NATURE PHOTONICS (2014)
Effects of different polar solvents for solvent vapor annealing treatment on the performance of polymer solar cells
Yifan Zheng et al.
ORGANIC ELECTRONICS (2014)
Understanding the Morphology of PTB7: PCBM Blends in Organic Photovoltaics
Feng Liu et al.
ADVANCED ENERGY MATERIALS (2014)
Electron Collection as a Limit to Polymer:PCBM Solar Cell Efficiency: Effect of Blend Microstructure on Carrier Mobility and Device Performance in PTB7:PCBM
Samuel Foster et al.
ADVANCED ENERGY MATERIALS (2014)
High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer
Zhan'ao Tan et al.
SCIENTIFIC REPORTS (2014)
Towards High Performance Organic Photovoltaic Cells: A Review of Recent Development in Organic Photovoltaics
Junsheng Yu et al.
POLYMERS (2014)
Effect of Fullerene Tris-adducts on the Photovoltaic Performance of P3HT:Fullerene Ternary Blends
Hyunbum Kang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
A Selenium-Substituted Low-Bandgap Polymer with Versatile Photovoltaic Applications
Letian Dou et al.
ADVANCED MATERIALS (2013)
High-Efficiency Polymer Solar Cells Enhanced by Solvent Treatment
Huiqiong Zhou et al.
ADVANCED MATERIALS (2013)
Organic Ternary Solar Cells: A Review
Tayebeh Ameri et al.
ADVANCED MATERIALS (2013)
Materials for the Active Layer of Organic Photovoltaics: Ternary Solar Cell Approach
Yung-Chung Chen et al.
CHEMSUSCHEM (2013)
IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells
Tayebeh Ameri et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Organic Solar Cells beyond One Pair of Donor-Acceptor: Ternary Blends and More
Liqiang Yang et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Multipositional Silica-Coated Silver Nanoparticles for High-Performance Polymer Solar Cells
Hyosung Choi et al.
NANO LETTERS (2013)
Polymer bulk heterojunction solar cells employing Forster resonance energy transfer
Jing-Shun Huang et al.
NATURE PHOTONICS (2013)
Polymer solar cells with enhanced fill factors
Xugang Guo et al.
NATURE PHOTONICS (2013)
A facile strategy to enhance the fill factor of ternary blend solar cells by increasing charge carrier mobility
Kun Lu et al.
NEW JOURNAL OF CHEMISTRY (2013)
Fill factor in organic solar cells
Boyuan Qi et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Polymer bulk heterojunction photovoltaics employing a squaraine donor additive
Yong Joo Cho et al.
ORGANIC ELECTRONICS (2013)
Efficiency of bulk-heterojunction organic solar cells
M. C. Scharber et al.
PROGRESS IN POLYMER SCIENCE (2013)
Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells
Gordon J. Hedley et al.
NATURE COMMUNICATIONS (2013)
A polymer tandem solar cell with 10.6% power conversion efficiency
Jingbi You et al.
NATURE COMMUNICATIONS (2013)
Absolute Measurement of Domain Composition and Nanoscale Size Distribution Explains Performance in PTB7:PC71BM Solar Cells
Brian A. Collins et al.
ADVANCED ENERGY MATERIALS (2013)
Investigation on the Effects of Thermal Annealing on PCDTBT:PCBM Bulk-Heterojunction Polymer Solar Cells
Abhay Gusain et al.
SOLID STATE PHYSICS, VOL 57 (2013)
Improving the Performance of P3HT-Fullerene Solar Cells with Side-Chain-Functionalized Poly(thiophene) Additives: A New Paradigm for Polymer Design
Jose M. Lobez et al.
ACS NANO (2012)
Effects of the Morphology of a ZnO Buffer Layer on the Photovoltaic Performance of Inverted Polymer Solar Cells
Zhiqiang Liang et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Near-infrared photoresponse sensitization of solvent additive processed poly(3-hexylthiophene)/fullerene solar cells by a low band gap polymer
Zhongjian Hu et al.
APPLIED PHYSICS LETTERS (2012)
Manipulating the Morphology of P3HT-PCBM Bulk Heterojunction Blends with Solvent Vapor Annealing
Eric Verploegen et al.
CHEMISTRY OF MATERIALS (2012)
Influence of a ternary donor material on the morphology of a P3HT:PCBM blend for organic photovoltaic devices
Florian Machui et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Toward the Realization of A Practical Diketopyrrolopyrrole-Based Small Molecule for Improved Efficiency in Ternary BHJ Solar Cells
Junghoon Lee et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2012)
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
Zhicai He et al.
NATURE PHOTONICS (2012)
Solution processed bulk heterojunction polymer solar cells with low band gap DPP-CN small molecule sensitizer
G. D. Sharma et al.
ORGANIC ELECTRONICS (2012)
Effect of carbon nanotube-fullerene hybrid additive on P3HT:PCBM bulk-heterojunction organic photovoltaics
Nigel J. Alley et al.
SYNTHETIC METALS (2012)
Spin-enhanced organic bulk heterojunction photovoltaic solar cells
Ye Zhang et al.
NATURE COMMUNICATIONS (2012)
P3HT/PCBM Bulk Heterojunction Organic Photovoltaics: Correlating Efficiency and Morphology
Dian Chen et al.
NANO LETTERS (2011)
A study of the factors influencing the performance of ternary MEH-PPV:porphyrin:PCBM heterojunction devices: A steric approach to controlling charge recombination
Nathan Cooling et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Improved power conversion efficiency of bulk heterojunction poly(3-hexylthiophene):PCBM photovoltaic devices using small molecule additive
S. S. Sharma et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Efficient and Air-Stable Polymer Photovoltaic Devices With WO3-V2O5 Mixed Oxides as Anodic Modification
Jing-Shun Huang et al.
IEEE ELECTRON DEVICE LETTERS (2010)
Solvent vapour annealing of organic thin films: controlling the self-assembly of functional systems across multiple length scales
Giovanna De Luca et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
A ternary cascade structure enhances the efficiency of polymer solar cells
Jen-Hsien Huang et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Combination of Indene-C60 Bis-Adduct and Cross-Linked Fullerene Interlayer Leading to Highly Efficient Inverted Polymer Solar Cells
Yen-Ju Cheng et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
The Role of Mesoscopic PCBM Crystallites in Solvent Vapor Annealed Copolymer Solar Cells
Tricia A. Bull et al.
ACS NANO (2009)
Time-Dependent Morphology Evolution by Annealing Processes on Polymer:Fullerene Blend Solar Cells
Jang Jo et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Distinct Annealing Temperature in Polymer:Fullerene:Polymer Ternary Blend Solar Cells
Hwajeong Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)
Efficiency Limits of Organic Bulk Heterojunction Solar Cells
Thomas Kirchartz et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)
Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic Properties
Yongye Liang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Effect of solvent mixture on the nanoscale phase separation in polymer solar cells
Yan Yao et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Solvent mixtures for improving device efficiency of polymer photovoltaic devices
Fang-Chung Chen et al.
APPLIED PHYSICS LETTERS (2008)
Analysis of the excited states of regioregular polythiophene P3HT
Steffan Cook et al.
ENERGY & ENVIRONMENTAL SCIENCE (2008)
Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes
Gang Li et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
WSXM: A software for scanning probe microscopy and a tool for nanotechnology
I. Horcas et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2007)
Design rules for donors in bulk-heterojunction solar cells -: Towards 10 % energy-conversion efficiency
MC Scharber et al.
ADVANCED MATERIALS (2006)
High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
G Li et al.
NATURE MATERIALS (2005)
An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films
SY Heriot et al.
NATURE MATERIALS (2005)
Effect of temperature and illumination on the electrical characteristics of polymer-fullerene bulk-heterojunction solar cells
I Riedel et al.
ADVANCED FUNCTIONAL MATERIALS (2004)