Related references
Note: Only part of the references are listed.Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements
Nader A. Nassif et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2014)
The Surgical Options and Clinical Evidence for Treatment of Wear or Corrosion Occurring With THA or TKA
Charles A. Engh et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2014)
Early Corrosion-Related Failure of the Rejuvenate Modular Total Hip Replacement
Morteza Meftah et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2014)
Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study
Steven M. Kurtz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2013)
One hundred and fifty years of history of the Morse taper: from Stephen A. Morse in 1864 to complications related to modularity in hip arthroplasty
Philippe Hernigou et al.
INTERNATIONAL ORTHOPAEDICS (2013)
The Influence of Head Size on Corrosion and Fretting Behaviour at the Head-Neck Interface of Artificial Hip Joints
Richard M. R. Dyrkacz et al.
JOURNAL OF ARTHROPLASTY (2013)
Is Increased Modularity Associated With Increased Fretting and Corrosion Damage in Metal-On-Metal Total Hip Arthroplasty Devices? A Retrieval Study
Genymphas B. Higgs et al.
JOURNAL OF ARTHROPLASTY (2013)
Quantitative and Qualitative Assessment of Bone Perfusion and Arterial Contributions in a Patellar Fracture Model Using Gadolinium-Enhanced Magnetic Resonance Imaging
Lionel E Lazaro et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2013)
Morphometrics and Lesions of Vertebral End Plates Are Associated with Lumbar Disc Degeneration
Yue Wang et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2013)
Current and Future Use of Surgical Skills Training Laboratories in Orthopaedic Resident Education: A National Survey
Matthew D. Karam et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2013)
Enhanced Wear and Corrosion in Modular Tapers in Total Hip Replacement Is Associated With the Contact Area and Surface Topography
Anna Panagiotidou et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Fretting corrosion of CoCrMo and Ti6Al4V interfaces
Viswanathan Swaminathan et al.
BIOMATERIALS (2012)
Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprostheses
Annelie Rehmer et al.
CLINICAL BIOMECHANICS (2012)
Proximal Component Modularity in THA-At What Cost?: An Implant Retrieval Study
A. M. Kop et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2012)
The Frank Stinchfield Award: Dislocation in Revision THA: Do Large Heads (36 and 40 mm) Result in Reduced Dislocation Rates in a Randomized Clinical Trial?
Donald S. Garbuz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2012)
Corrosion at the Head-Neck Taper as a Cause for Adverse Local Tissue Reactions After Total Hip Arthroplasty
H. John Cooper et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
Large Femoral Heads Decrease the Incidence of Dislocation After Total Hip Arthroplasty A Randomized Controlled Trial
Donald W. Howie et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
Large diameter heads IS BIGGER ALWAYS BETTER?
J. A. Rodriguez et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2012)
Modularity of the Femoral Component in Total Hip Arthroplasty
Anand Srinivasan et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2012)
Evaluation and Treatment of Painful Total Hip Arthroplasties With Modular Metal Taper Junctions
R. Michael Meneghini et al.
ORTHOPEDICS (2012)
Taper junction failure in large-diameter metal-on-metal bearings
D. J. Langton et al.
BONE & JOINT RESEARCH (2012)
Thirty years of experience with alumina-on-alumina bearings in total hip arthroplasty
Didier Hannouche et al.
INTERNATIONAL ORTHOPAEDICS (2011)
Revision of Ceramic Hip Replacements for Fracture of a Ceramic Component
Francesco Traina et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2011)
The Seven-Year Wear of Highly Cross-Linked Polyethylene in Total Hip Arthroplasty A Double-Blind, Randomized Controlled Trial Using Radiostereometric Analysis
Geraint E. R. Thomas et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2011)
Fretting corrosion behaviour of Ti-6Al-4V alloy in artificial saliva containing varying concentrations of fluoride ions
B. Sivakumar et al.
WEAR (2011)
The John Charnley Award Metal-on-Metal Hip Resurfacing versus Large-diameter Head Metal-on-Metal Total Hip Arthroplasty A Randomized Clinical Trial
Donald S. Garbuz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2010)
Is There a Risk in Placing a Ceramic Head on a Previously Implanted Trunion?
Didier Hannouche et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2010)
Highly Crosslinked Polyethylene Reduces Wear in Total Hip Arthroplasty at 5 Years
Jonathan Mutimer et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2010)
Early- and Late-Term Dislocation Risk After Primary Hip Arthroplasty in the Medicare Population
Arthur L. Malkani et al.
JOURNAL OF ARTHROPLASTY (2010)
In Vivo Severe Corrosion and Hydrogen Embrittlement of Retrieved Modular Body Titanium Alloy Hip-Implants
Danieli C. Rodrigues et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
Special modes of corrosion under physiological and simulated physiological conditions
S. Virtanen et al.
ACTA BIOMATERIALIA (2008)
MRI of early symptomatic metal-on-metal total hip arthroplasty: a retrospective review of radiological findings in 20 hips
A. P. Toms et al.
CLINICAL RADIOLOGY (2008)
Impingement with total hip replacement
Aamer Malik et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2007)
Effect of impact assembly on the fretting corrosion of modular hip tapers
ML Mroczkowski et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2006)
Influence of total hip design on dislocation - A computer model and clinical analysis
Douglas E. Padgett et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2006)
Effect of femoral head diameter and operative approach on risk of dislocation after primary total hip arthroplasty
DJ Berry et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2005)
Environmental effect on fretting of metallic materials for orthopaedic implants
L Duisabeau et al.
WEAR (2004)
Differences in the fretting corrosion of metal-metal and ceramic-metal modular junctions of total hip replacements
NJ Hallab et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2004)
Polyethylene cross-linking by two different methods reduces acetabular liner wear in a hip joint wear simulator
DD D'Lima et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2003)
Protection of femoral neck taper in revision of acetabular component
TJS Puolakka et al.
JOURNAL OF ARTHROPLASTY (2002)
Stem design and dislocation after revision total hip arthroplasty - Clinical results and computer modeling
RL Barrack et al.
JOURNAL OF ARTHROPLASTY (2001)
In vitro reaction to orthopaedic biomaterials by macrophages and lymphocytes isolated from patients undergoing revision surgery
MCD Trindade et al.
BIOMATERIALS (2001)
Extensive metallosis and necrosis in failed prostheses with cemented titanium-alloy stems and ceramic heads
L Milosev et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2000)