Factors Affecting Strength of Road Base Stabilized with Cement Slurry or Dry Cement in Conjunction with Full-Depth Reclamation

Full-depth reclamation (FDR) in conjunction with cement stabilization is an established practice for the rehabilitation of flexible pavements. Conventionally, the FDR process involves applying dry cement powder with a pneumatic spreader, but this process can create undesirable fugitive cement dust. To solve this problem, cement slurry has been proposed because it can allow cement stabilization to be used in urban areas. This research sought to (a) identify construction-related factors that influence the strength of road base treated with cement slurry in conjunction with FDR and quantify the effects of those factors and (b) compare the strength of road base treated with cement slurry with that of road base treated with dry cement. Full-factorial laboratory experimentation on a road base sampled from an FDR project was conducted. The 7-day unconfined compressive strength was measured as the dependent variable. The independent variables included cement content; slurry water batching temperature; presence of a set-retarding, water-reducing admixture; cement slurry aging temperature; cement slurry aging time; cement-aggregate mixing time; and form of cement. The results suggested that the slurry water hatching temperature, the haul time, the environmental temperature, and the presence of a set-retarding, water-reducing admixture would not significantly affect the strength of a cement-treated base (CTB) within the ranges of the factors investigated in this research. However, cement content and cement-aggregate mixing time were found to be positively correlated with CTB strength, regardless of the cement form. Additionally, the use of cement slurry was found to result in slightly lower strength values than the use of dry cement.